Hi All, I have Debian squeeze running on my TS219 since a few days thanks to the excellent installation manual from Martin.
Yesterday I have tried to play around with WOL. Therefore I implemented the missing phy bits in the mv643xx_eth driver and added the wol commands to qcontrol (for now). When I was ready to try things out, I noticed that my TS219 will not poweroff. I tried "poweroff" or "shutdown -h now" but the machine kept powered on. The system shuts down (as far as I can see having no serial console attached) and the moment the poweroff command is send to the pic, the fan runs full speed for a second and keeps running silently and the power led flashes red / green. I added the poweroff command to qcontrol and run it with the same result: Short full speed fan, then low fan and pulsing led. I also noticed that the autopower function cannot be disabled on my system. When my system is in the state described above and I powercycle it, it will always turn on, even if I have disabled autopower using qcontrol. Can anyone explain this? Does powering off work for you other 219 owners? Thanks, Rolf -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4fa8db32.7090...@gmx.net
