Le 07/04/2012 23:03, Roger Barraud a écrit : > On 07/04/12 18:48, DrEagle wrote: >> Hi Andrew, >> >> Just a clue, >> >> Le 09/02/2012 14:45, Andrew M.A. Cater a écrit : >>> Upated to lastest DENX U-boot and went to install Debian as per >>> Martin's excellent instructions. >>> >>> Aborted the install part way through. >>> >>> Now can't get back into the plug via U-boot : screen /dev/ttyUSB0 >>> 115200 isn't working. >>> >>> Have one green light - serial plug, reset are facing you as the plug >>> lies with mains on right had side, Ethernet on left: this is the >>> right hand one of the two green LEDs opposite the SD card. >>> >>> There is Ethernet activity. >>> >>> Reset button has no apparent effect. >>> >>> Nmap doesn't show it at least at 192.168.1.0/24 >>> >>> Any ideas? >>> >>> This is the third or fourth attempt: I've another working Sheevaplug >>> installed last week, but without serial console to this one I can't >>> get any further. >> Use you usb/serial as a JTag (it works also as a jtag). >> You can reflash yoyr uboot usng openocd [1]. >> >> FYI, then only sheevaplugs bricked were because of power supply >> faulty... ;-) >> >> [1]https://doukki.net/doku.php?id=wiki:tutoriels:uboot.howto >> --- >> Gk2 >> :-] >> >> > Does this also work with GuruPlug?
The same way, you can always flash with Jtag ! You only need a specific adapter for serial/jtag on the guruplug. Regards, --- Gk2 :-] -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4f815006.9060...@doukki.net
