Re, On Sat, Nov 06, 2010 at 01:26:02AM -0700, Jose Solorio wrote:
> Yes, I think I followed the instructions pretty good. When > installation is finishing up I do get "Flashing kernel/initrd...". > In my latest attempt I was successful installing but after reboot I > got the can't load ramdisk.gz and zImage because it couldn't via > tftp. Just to be sure I understand right : the nas should (re)boot alone and you are not supposed to do anything, right ? If it can't boot in these conditions, I suspect a wrong boot_script_data content, but if the installer went correctly, you should have the right file there... > I didn't use tftp to load. Here's what I do to install. > at boot > i hit ctrl + c > at Redboot> prompt I type fconfig boot_script_data > then type in: > Load ramdisk.gz > Load zImage.gz > exec and then hit enter and write to flash > then I load teh files as directed via ymodem and then run the exec -c > "console=ttyS0........." Where do you see the need for writing boot_script_data yourself in the instructions here http://d-i.alioth.debian.org/manual/en.armel/ch05s01.html ? Could you report what you have now in boot_script_data ? A+ -- JFS. -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20101106142346.ga6...@hohenhole.jfs.dt
