Looking at Martin's site, I didn't see the note on the broken installer, so I assumed things are working. My installation completed fine, but while booting from my sd card, its just hangs mid-way.
As you can see in the log fsck is failing with the following error...not sure if this is ominous or not. */dev/mmcblk0p1: 19/109728 files (10.5% non-contiguous), 28733/219136 blocks * *fsck died with exit status 1* I did add several extra packages aside from just the core installation, namely sshd, cups, web server. Should I try do something else, other than retry the install? Serial number: 2631634805 Manufacturing date: 5/2010 CRC: 0x00, b0 = 0 5618189 bytes read 1445948 bytes read ## Booting image at 00800000 ... Image Name: Debian kernel Created: 2010-07-21 9:51:19 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1445884 Bytes = 1.4 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 01100000 ... Image Name: Debian ramdisk Created: 2010-07-21 9:51:22 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 5618125 Bytes = 5.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-kirkwood (Debian 2.6.32-15) ( b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 Thu Jun 3 15:54:38 UTC 2010 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Marvell SheevaPlug Reference Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 256MB 256MB = 512MB total [ 0.000000] Memory: 509696KB available (3548K code, 583K data, 120K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000000] Console: colour dummy device 80x30 [ 0.000125] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 0.240085] Security Framework initialized [ 0.240104] SELinux: Disabled at boot. [ 0.240131] Mount-cache hash table entries: 512 [ 0.240421] Initializing cgroup subsys ns [ 0.240437] Initializing cgroup subsys cpuacct [ 0.240447] Initializing cgroup subsys devices [ 0.240456] Initializing cgroup subsys freezer [ 0.240463] Initializing cgroup subsys net_cls [ 0.240506] CPU: Testing write buffer coherency: ok [ 0.241203] devtmpfs: initialized [ 0.242851] regulator: core version 0.5 [ 0.243053] NET: Registered protocol family 16 [ 0.243550] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 0.243563] Feroceon L2: Enabling L2 [ 0.243595] Feroceon L2: Cache support initialised. [ 0.245587] bio: create slab <bio-0> at 0 [ 0.245850] vgaarb: loaded [ 0.246298] Switching to clocksource orion_clocksource [ 0.249882] NET: Registered protocol family 2 [ 0.250172] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.250934] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.251287] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.251466] TCP: Hash tables configured (established 16384 bind 16384) [ 0.251475] TCP reno registered [ 0.251623] NET: Registered protocol family 1 [ 0.251789] Unpacking initramfs... [ 0.610745] Freeing initrd memory: 5484K [ 0.610838] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.611079] audit: initializing netlink socket (disabled) [ 0.611128] type=2000 audit(0.600:1): initialized [ 0.617638] VFS: Disk quotas dquot_6.5.2 [ 0.617897] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.617988] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.618610] msgmni has been set to 1006 [ 0.620209] alg: No test for stdrng (krng) [ 0.620326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.620339] io scheduler noop registered [ 0.620346] io scheduler anticipatory registered [ 0.620353] io scheduler deadline registered [ 0.620541] io scheduler cfq registered (default) [ 0.626498] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.626955] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.946160] console [ttyS0] enabled [ 0.950220] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) [ 0.958748] Scanning device for bad blocks [ 1.082498] Creating 3 MTD partitions on "orion_nand": [ 1.087675] 0x000000000000-0x000000100000 : "u-boot" [ 1.093219] 0x000000100000-0x000000500000 : "uImage" [ 1.098694] 0x000000500000-0x000020000000 : "root" [ 1.104904] mice: PS/2 mouse device common for all mice [ 1.110522] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 1.116478] i2c /dev entries driver [ 1.120149] cpuidle: using governor ladder [ 1.124376] cpuidle: using governor menu [ 1.128422] Registered led device: plug:green:health [ 1.133455] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 1.139872] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 1.186359] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 1.226357] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 1.266356] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 1.306356] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 1.313015] TCP cubic registered [ 1.316257] NET: Registered protocol family 17 [ 1.321066] registered taskstats version 1 [ 1.325798] rtc-mv rtc-mv: setting system clock to 2010-07-21 16:32:33 UTC (1279729953) [ 1.333862] Initalizing network drop monitor service [ 1.338917] Freeing init memory: 120K Loading, please wait... [ 1.416837] udev: starting version 158 [ 1.675331] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 1.708503] mv643xx_eth smi: probed [ 1.712195] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) [ 1.766854] net eth0: port 0 with MAC address 00:50:43:01:c1:e6 [ 1.775551] usbcore: registered new interface driver usbfs [ 1.788089] usbcore: registered new interface driver hub [ 1.798173] usbcore: registered new device driver usb [ 1.817550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.824188] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 1.829539] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 1.843926] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.852078] mmc0: new high speed SDHC card at address 1234 [ 1.870261] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 1.877529] mmcblk0: mmc0:1234 SA04G 3.68 GiB [ 1.882147] mmcblk0: p1 p2 p3 < [ 1.886462] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 1.892646] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.899489] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.906759] usb usb1: Product: Marvell Orion EHCI [ 1.911484] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd [ 1.917875] usb usb1: SerialNumber: orion-ehci.0 [ 1.923120] usb usb1: configuration #1 chosen from 1 choice [ 1.929213] p5 > [ 1.932832] hub 1-0:1.0: USB hub found [ 1.944561] hub 1-0:1.0: 1 port detected Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 2.237188] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.243575] EXT3-fs: write access will be enabled during recovery. [ 7.978096] kjournald starting. Commit interval 5 seconds [ 7.983636] EXT3-fs: recovery complete. [ 8.213760] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 8.875013] udev: starting version 158 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...[ 9.609801] Adding 219128k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:219128k SS done. Checking root file system...fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/mmcblk0p2: clean, 43845/214272 files, 257072/855808 blocks done. [ 9.782403] EXT3 FS on mmcblk0p2, internal journal [ 9.953126] loop: module loaded Cleaning up ifupdown.... Loading kernel modules...done. Setting up networking.... Activating lvm and md swap...done. Checking file systems...fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/mmcblk0p1 was not cleanly unmounted, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/mmcblk0p1: 19/109728 files (10.5% non-contiguous), 28733/219136 blocks fsck died with exit status 1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Setting kernel variables ...done. Configuring network interfaces...done. Starting portmap daemon.... Starting NFS common utilities: statd. Cleaning up temporary files.... Setting sensors limits. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Starting portmap daemon...Already running.. Starting NFS common utilities: statd. Starting enhanced syslogd: rsyslogd. Starting web server: apache2[ 14.440422] NET: Registered protocol family 10 [ 14.446802] lo: Disabled Privacy Extensions [ 14.452494] ADDRCONF(NETDEV_UP): eth0: link is not ready . Starting deferred execution scheduler: atd[ 15.782324] eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 15.789331] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready . Starting periodic command scheduler: cron. UUID file '/var/lib/dbus/machine-id' should contain a hex string of length 32, not length 0, with no other text Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon failed! Starting Common Unix Printing System: cupsd
