* Samuele Bianchi <pizzulicc...@mail2web.com> [2010-07-12 07:58]:
> [0 1 0]: Enable DMA mode
> Device 1 @ 0 1:
> Model: WDC WD1200BEVS-22RST0 Firm: 04.01G04 Ser#:
> WD-WXE808NWD688
> Type: Hard Disk
> Supports 48-bit addressing
> Capacity: 114473.4 MB = 111.7 GB (234441648 x 512)
What's the output of:
ide part
And also check:
print bootcmd_sata
Here, I get:
Marvell>> ide part
Partition Map for IDE device 0 -- Partition Type: DOS
Partition Start Sector Num Sectors Type
1 2048 497664 83
2 499712 13672448 83
3 14174206 474222594 5 Extd
5 14174208 3014656 82
6 17190912 471205888 83
So my IDE device is 0 and the boot partition is 1, leading to 0:1
Which I then put in the bootcmd_sata variable:
Marvell>> print bootcmd_sata
bootcmd_sata=ide reset; ext2load ide 0:1 0x1100000 /uInitrd; ext2load ide 0:1
0x0800000 /uImage
^^^^^^^ ^^^^^^^
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100715163542.ga29...@jirafa.cyrius.com
