I have try to reinstall the system using the usb instead of esata but the
problem is always present.
Should be an u-boot problem?
I have attached the same hardisk with the installation made from my esata sheva
plug to my Ionics shevaplug using usb.
This last one is be able to boot without any problem.
What have i missed?
________________________________________
Da: Samuele Bianchi [pizzulicc...@mail2web.com]
Inviato: lunedì 12 luglio 2010 13.58
A: debian-arm@lists.debian.org
Oggetto: R: Debian installer for SheevaPlug eSATA
Good day Martin.
The ( only ) installer works fine, but i'm not be able to boot the system after
the installation.
This is the output:
***********************************************************
Marvell Serial ATA Adapter
Integrated Sata device found
[0 1 0]: Enable DMA mode
Device 1 @ 0 1:
Model: WDC WD1200BEVS-22RST0 Firm: 04.01G04 Ser#:
WD-WXE808NWD688
Type: Hard Disk
Supports 48-bit addressing
Capacity: 114473.4 MB = 111.7 GB (234441648 x 512)
** Bad partition 1 **
** Bad partition 1 **
## Booting image at 00800000 ...
Bad Magic Number
Marvell>>
************************************************************
what have i done of wrong?
I'm using my Esata sheeva plug (new it ) with an Esata disc obviously.
________________________________________
Da: Martin Michlmayr [...@cyrius.com]
Inviato: venerdì 11 giugno 2010 16.04
A: debian-arm@lists.debian.org
Oggetto: Re: Debian installer for SheevaPlug eSATA
* Martin Michlmayr <t...@cyrius.com> [2010-06-08 11:47]:
> Also, starting the installer is slightly different. You have to do it
> like this:
>
> setenv bootargs console=ttyS0,115200
> base-installer/initramfs-tools/driver-policy=most
> apt-setup/local0/repository="http://people.debian.org/~tbm/orion lenny main"
> apt-setup/local0/key=http://people.debian.org/~tbm/orion/68FD549F
> bootm 0x00800000 0x01100000
The new kernel is in Debian testing now, so you can simply install
with:
setenv bootargs console=ttyS0,115200
base-installer/initramfs-tools/driver-policy=most
bootm 0x00800000 0x01100000
Can someone with a SheevaPlug eSATA confirm that this is working? If
so, I'll update my web site.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100611140434.ga15...@jirafa.cyrius.com
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/27c865337a1cc74b81250b3fcc32a7b94d73ef0...@mbx81.ad2.softcom.biz
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/27c865337a1cc74b81250b3fcc32a7b94d74894...@mbx81.ad2.softcom.biz
