Le Sun, Jun 20, 2010 at 02:06:56PM +0100, Martin Michlmayr a écrit : > > Download the installer files and store them on your TFTP server: > wget http://merkel.debian.org/~tbm/tmp/kernel/uImage-kirkwood_2.6.32-16 > wget > http://people.debian.org/~joeyh/d-i/armel/images/daily/kirkwood/netboot/marvell/openrd/uInitrd > > Load them from the TFTP server and start the installer:
Hi Martin, I tested the images, but unfortunately there is again a problem with the network card. During detection, I have the choice between no ethernet card, libphy, mv643xx_eth, or none of the above. When I chose libphy, I am sent again to the network hardware detection screen. When I chose mv643xx_eth, I am sent to the main menu, but if I chose Configure the network, it sends me again to the hardware detection screen. The syslog contains many lines like this: Jun 20 10:07:13 ethdetect: insmod /lib/modules/2.6.32-5-kirkwood/kernel/drivers/net/mv643xx_eth.ko Jun 20 10:07:13 kernel: [ 222.099773] mv643xx_eth: Unknown symbol lro_flush_all Jun 20 10:07:13 kernel: [ 222.101367] mv643xx_eth: Unknown symbol lro_receive_skb Jun 20 10:07:13 ethdetect: FATAL: Error inserting mv643xx_eth (/lib/modules/2.6.32-5-kirkwood/kernel/drivers/net/mv643xx_eth.ko): Unknown symbol in module, or unknown parameter (see dmesg) I have attached the dmsg, syslog and hardware-summary as gzipped files to this email. Cheers, -- Charles
Plessy-OpenRD-Ultimate-2010-06-20-2.dmesg.gz
Description: Binary data
Plessy-OpenRD-Ultimate-2010-06-20-2.hardware-summary.gz
Description: Binary data
Plessy-OpenRD-Ultimate-2010-06-20-2.syslog.gz
Description: Binary data
