Hi I am having a problem with thinkfinger-0.3 in an embedded Arm9 board (ATMEL AT91sam9263-EK) with linux. I tested on Angstrom RFS as well as debian Armel Lenny RFS. Using kernel 2.6.28 patched for At91sam9263.
The driver and commands work very well in a normal Debian PC. While the #tf-tool works well in normal Linux PC, it gives the following error always on the Atmel board, be it Arngstrom or Armel file system. Please help me to get this fixed. We thought it could be a problem with power supply. But after giving an external power of 5V--2.0A , the output is the same. Vaaraahi:~/thinkfinger-0.3# lsusb Bus 001 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Vaaraahi:~/thinkfinger-0.3# tf-tool --acquire ThinkFinger 0.3 (http://thinkfinger.sourceforge.net/) Copyright (C) 2006, 2007 Timo Hoenig <thoe...@suse.de> Initializing... done. Could not acquire fingerprint (communication with fingerprint reader failed). Could this be a problem with libusb-dev? The source install of thinkfinger needs to have libusb-dev? I did apt-get install in Armel. Is there a chance that the libusb package is different from normal debian lenny stream? regards Nataraj -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
