Den 2009-04-26 13:39:17 skrev David Given <d...@cowlark.com>:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Rickard Nilsson wrote:
[...]
However, the process just stops after having uncompressed the
kernel:
What are your bootargs? Have you told it you want it to use a serial
console (without which you'll get no output at all)?
I have:
console=ttyS0,115200
mtdparts=nand_mtd:0x400...@0x100000(uImage),0x1fb00...@0x500000(rootfs)
rw root=b301 rootdelay=5
(b301 is the first partition on the SD card; you should be aware that
there seems to be a problem with recent mainline kernels in that they
don't handle the SD card properly.)
I have essentially the same bootargs as you, including the console. If
I boot the kernel that Marvell ships, in exactly the same way and with
the same bootargs, everything works fine, and I can watch the kernel
loading on the console.
I have also tried running:
setenv mainlineLinux=yes
setenv arcNumber=2097
first, as Martin suggested, but that didn't change anything.
/ Rickard
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
