Hi all, this is a follow-up of yesterday problem about poerformance I was said to do:
>The disks leds are disabled by default and don't have a trigger to >enable them. Look at the /sys/class/leds/ directory. If you want to >enable them, echo '1' in the brightness file. For instance: >echo 1 > /sys/class/leds/HD1:green/brightness >The hardware will do the rest for the disk I/O access for the green >leds. Now I compiled my zImage with leds support, and on boot I can read: .... INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...Registered led device: status:amber Registered led device: HD:green done. ... lsmod output: storage01:/sys/class/leds# lsmod Module Size Used by dm_snapshot 15712 0 dm_mirror 24960 0 dm_mod 51876 2 dm_snapshot,dm_mirror leds_gpio 3072 0 led_class 3876 1 leds_gpio and /sys/class/leds directory: storage01:/sys/class/leds# dir total 0 drwxr-xr-x 4 root root 0 Nov 19 15:19 . drwxr-xr-x 22 root root 0 Jan 1 1970 .. drwxr-xr-x 3 root root 0 Nov 19 15:19 HD:green drwxr-xr-x 3 root root 0 Nov 19 15:19 status:amber So: I have no HD1:green directory; inside HD:green I can see: storage01:/sys/class/leds/HD:green# dir total 0 drwxr-xr-x 3 root root 0 Nov 19 15:19 . drwxr-xr-x 4 root root 0 Nov 19 15:19 .. -rw-r--r-- 1 root root 0 Nov 19 15:20 brightness lrwxrwxrwx 1 root root 0 Nov 19 15:20 device -> ../../../devices/platform/leds-gpio.1 drwxr-xr-x 2 root root 0 Nov 19 15:20 power lrwxrwxrwx 1 root root 0 Nov 19 15:20 subsystem -> ../../leds -rw-r--r-- 1 root root 4096 Nov 19 15:20 trigger -rw-r--r-- 1 root root 4096 Nov 19 15:20 uevent I tried to echo 1 into this brightness file, but nothing changed What else can I try ? --- 2nd question: I have no rtc inside; I setup in order to get the time from an external time server, and it is ok; Anyway I would like to know if this system (ss4000e) actually support rtc, and what can I try to do to enable it. I have non /dev/rtc0 nor any module compiled about rtc thanks in advance, Andrea -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
