>> >> My second question was about disks status led: It could be fine to see the >> lighted when they >> are working. With the original software they lights on traffic, so I think >> that they are not >> broken.
>The disks leds are disabled by default and don't have a trigger to >enable them. Look at the /sys/class/leds/ directory. If you want to >enable them, echo '1' in the brightness file. For instance: >echo 1 > /sys/class/leds/HD1:green/brightness >The hardware will do the rest for the disk I/O access for the green >leds. As I said yesterday, I have no /sys/class/leds directory, probably because I cannot load any led module. Actually I haven't any led-module. But If I enable leds in menuconfig, I obtain compiled modules : storage01:/usr/src/linux-2.6# dir /lib/modules/2.6.25.1/kernel/drivers/leds/ total 340 drwxr-xr-x 2 root root 4096 Nov 19 11:48 . drwxr-xr-x 7 root root 4096 Nov 19 11:48 .. -rw-r--r-- 1 root root 79140 Nov 19 11:48 led-class.ko -rw-r--r-- 1 root root 77905 Nov 19 11:48 leds-gpio.ko -rw-r--r-- 1 root root 74156 Nov 19 11:48 ledtrig-heartbeat.ko -rw-r--r-- 1 root root 78594 Nov 19 11:48 ledtrig-timer.ko If I try ro modprobe let's say led-class, I get errors: led_class: Unknown symbol leds_list_lock led_class: Unknown symbol led_trigger_store led_class: Unknown symbol leds_list led_class: Unknown symbol led_trigger_set led_class: Unknown symbol led_trigger_show led_class: Unknown symbol led_trigger_set_default and the module does not load. What I am missing ? searching the net I find this: http://lkml.indiana.edu/hypermail/linux/kernel/0702.1/1660.html When I produced zImage Actually I haven't leds selected: do you think I can try to recreate zImage ? Andrea -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
