Hi,
I have attached to slug a hub of 4 ports and in one port I plug a net
usb key.
This key has ralink driver
kernel detects it (you can show that in dmesg), but it does not put any
interface (I have only eth0 and lo).
What can I do for having interface present in ifconfig?
Please, step by step. I'm a begginer.
I want to use rt2x00 instead of old rt2570 driver
Thanks a lot,
Xan.
[dmesg]
usb-storage: device found at 2
[42949385.830000] usb-storage: waiting for device to settle before scanning
[42949385.940000] usb 1-2.4: new high speed USB device using ehci_hcd
and address 4
[42949386.190000] usb 1-2.4: configuration #1 chosen from 1 choice
[42949386.200000] usb 1-2.4: New USB device found, idVendor=14b2,
idProduct=3c22
[42949386.210000] usb 1-2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[42949386.220000] usb 1-2.4: Product: 802.11 bg WLAN
[42949386.220000] usb 1-2.4: Manufacturer: Ralink
[dmesg]
eth0: MII PHY 1 on NPE-B
[42949420.720000] phy0: Selected rate control algorithm 'pid'
[42949421.740000] Registered led device: rt73usb-phy0:radio
[42949421.750000] Registered led device: rt73usb-phy0:assoc
[lsmod]
lsmod
Module Size Used by
ipv6 288308 12
arc4 1760 2
ecb 2784 2
crypto_blkcipher 17572 1 ecb
evdev 8672 0
rt73usb 21696 0
crc_itu_t 1984 1 rt73usb
rt2x00usb 9664 1 rt73usb
rt2x00lib 25120 2 rt73usb,rt2x00usb
rfkill 6196 1 rt2x00lib
input_polldev 4040 1 rt2x00lib
ixp4xx_eth 12280 0
ixp4xx_npe 8000 2 ixp4xx_eth
mac80211 167420 2 rt2x00usb,rt2x00lib
firmware_class 7648 2 rt2x00lib,ixp4xx_npe
ixp4xx_beeper 2816 0
ixp4xx_qmgr 5400 6 ixp4xx_eth
cfg80211 26088 2 rt2x00lib,mac80211
ext3 123304 7
jbd 45396 1 ext3
mbcache 7968 1 ext3
sd_mod 22736 9
usb_storage 82151 8
scsi_mod 111076 2 sd_mod,usb_storage
ohci_hcd 18276 0
ehci_hcd 35244 0
usbcore 128732 6
rt73usb,rt2x00usb,usb_storage,ohci_hcd,ehci_hcd
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
