I'm running Debian lenny on a Thecus N2100.
All is fine, except for one issue, I cannot control the fan in any
manner.
It would be nice to shut it off at times, as my one hard drive seems
to run quite cool under normal use.
I followed the instructions on the Thecus N2100/Installing Debian page,
but no matter what I do, the fan runs at full speed.
/sys/class/i2c-adapter/i2c-0/0-002e/pwm1, (and pwm2) already had values
of zero before I made any changes.
So, echo 0 > /sys/class/i2c-adapter/i2c-0/0-002e/pwm2
echo 0 > /sys/class/i2c-adapter/i2c-0/0-002e/pwm1
has no affect on fan operation.
Is something missing in a lenny install, or am I overlooking some
detail?
--
Al
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
