Hi Hector, > FYI, http://code.google.com/p/gp2x-linux26/source
That project has been 'dead' for some time with no updates planned as I understand it (developers have moved onto other projects). I did contact the developers working on it recently however I have not received any replies. I believe it is 2.6.18 based and does not do a lot more then setup the CPU and UART but I have not built it to try nor looked at length. However it may also be worth noting that after our last discussions about 2.6 on the GP2X I want back and revisited my previous 2.6 hacking and have now got my local 2.6 GP2X tree to the point where I have a 2.6.20 running on real hardware reasonably happily (booting the kernel from SD). Once I get this into a usable state (not very neat mind you) I will be committing the work to Open2x's SVN to see if other people will come on board and help develop the 2.6 BSP. I need to do a working framebuffer driver and sort SD/SDHC (SD DMA is badly broken on the MMSP2 SoC and this is causing a little fun with the frameworks presented by .20>). NAND and GPIO are also among other things on a very long TODO list ;-) and I haven't even considered tackling the 2nd CPU core or the closed source bits yet. I keep meaning to have a good look at the gp2x-linux26 source to see if there are completed drivers I can 'borrow'. I guess I really should do that sooner rather the later. If there is any interest in working on a 2.6 kernel for the GP2X from any GP2X owners (only jTAG wielding owners mind you) who are denizens of these lists then I would be very interested to hear from them as I have kept my comments and progress updates etc. to the smaller GP2X communities up till now and received the expected lukewarm responses. Regards, John Willis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
