I found out that issuing the boot command: video=1024x768 I can get a flickering, squashed, weird display on bootup, but it is really bad. 800x600 is acceptable, 1280x1024 is worse than 1024x768, and 640x480 is probably the best. My monitor's max capability is [EMAIL PROTECTED]
Anyways, fbset works just fine on this thing with the exception that I cannot seem to change color depth to anything beyond 8bpp. Perhaps the debian kernel was only compiled for 8bpp?
I know the Netwinder should be able to do 1024x768 in 16bpp, because it used to do that before I installed Debian.
By using "fbset 1024x768" and then "fbset -x" I got a modeline which I pasted into XF86Config-4 and it works. I really would like to get the 16bpp color if possible though. If anybody knows something about this I would appreciate some info.
This all with nettrom-2.3.3, kernel 2.4.16-netwinder, and XFree86 4.1.0.1
Otherwise, it is shaping up very nicely. I just managed to build an armv4l -> i686 cross debugger ( for use with Hurd ). The linux kernel headers were a little shakey, in /usr/include/asm, both param.h and page.h tried to include proc/param.h and arch/page.h which on my system arch/ and proc/ are empty. I just commented out the includes, crossed my fingers, and it kept on going.
The other compile error concerned /usr/lib/gcc-lib/arm-linux/2.95.4/include/stdbool.h
It gave an error about true and false previously defined. I just commented out the enum section and hoped for the best.
- Doug
