I seem to have lost all traces of READ_OR_PERISH and the netwinder
README.
I believe you can setup to use the rescue_netwinder.bin as the tftp
image.
setenv kerntftpserver 555.555.555.555
setenv kerntftpfile rescue_netwinder.bin
setenv kernconfig tftp
boot
(you also need to have your ip set and all...)
setenv netconfig_eth0 flash
setenv eth0_ip 555.555.555.555/24
setenv route0 0.0.0.0:555.555.555.555:n
I just booted using these sorts of commands. I didn't proceed with
the installer (no backup of system and not enough spine to proceed.)
--
Jim Studt, President
The Federated Software Group, Inc.
