A Dijous 28 Maig 2009, Maciek Kaliszewski va escriure: > Douglas A. Tutty wrote: > > On Tue, May 26, 2009 at 12:01:25AM +0200, Leopold Palomo Avellaneda wrote: > >> A Dilluns 25 Maig 2009, Douglas A. Tutty va escriure: > >>> On Mon, May 25, 2009 at 08:16:14PM +0200, Leopold Palomo Avellaneda > >>> wrote: > >>> > >>> > >>> > >>> Here's my /boot/grub/menu.lst that shows how to set it up. Grub will > >>> start with something like "press a key to continue" so that it knows > >>> whether you're at the serial console or the main (VGA) console, and > >>> thend presents the usual menu. > >> > >> Thanks a lot. Tomorrow I will find a serial cable .... I hope that the > >> Poweredge server has serial console... > >> > >> But, if you have serial console, do you have vga? > > > > Sure, inittab still gives you a getty on the VGA. > > > > Grub can only use _either_ the serial or the VGA. > > > > The kernel will send messages to whatever console= commands you give it, > > accepting input on the last console= given. Thus, the serial-console > > entry in menu.lst is console=tty console=ttyS1,38400n8. You'll get > > message on both. > > > > Another option for you if you have either a serial or paralell printer > > (I don't know if it works for USB printers) is to use lp0 as a console > > parameter, before console=tty, so that input is still from the VGA, but > > messages are printed out directly. > > > > Doug. > > Hi, > > Solutions mentioned earlier are of course better , but I 've seen also > photos of monitor screen (of course without flash :-) > :-)
-- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
