On Sat, Sep 16, 2006 at 11:57:44AM +0200, Martin Jambor wrote: > Hi, > > On 9/16/06, garrone <[EMAIL PROTECTED]> wrote: > >> >The command "shutdown -h" does not completely poweroff the system > >> >for kernels 2.6.11, 2.6.12, and 2.6.16. However 2.6.8 does > >> >turn off as it should! > >> > >Thanks. I was momentarily excited that 2.6.8 worked but the others > >didnt, suggesting that the problem was with the linux kernel rather > >than the board. However the situation where some kernel versions > >work and others don't now suggests to me that the problem is more likely > >to be with the board than the kernel. The linux code seems to follow > >the standard pretty closely. I tried 2.6.17 and that does > >not work either. I am running bios 3.03. > > Maybe I am stating the obvious, but have you had a look at and > compared the configurations of the kernels that do and don't work? > > I run vanilla kernels and whenever such problems arise (on both amd64 > and i386) it is most certainly my configuration error, not a kernel > version issue (there have been exceptions like burning through ATA > etc. though). > > HTH > > Martin
So what configuration options do you mean? When I debugged a failing 2.6.12, my debug statements were definitely being executed at the point where it was supposed to stop. I did briefly look at the configuration, but didnt see anything. These are standard debian pre-packaged images as well. The ACPI config from zless /proc/config.gz | grep ACPI is CONFIG_X86_64_ACPI_NUMA=y # ACPI (Advanced Configuration and Power Interface) Support CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_ASUS=m CONFIG_ACPI_IBM=m CONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y CONFIG_X86_ACPI_CPUFREQ=m # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m CONFIG_PNPACPI=y CONFIG_SERIAL_8250_ACPI=y It all looks pretty set to me. Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
