On Wed, Sep 13, 2006 at 10:00:18PM +0200, Daniel Tryba wrote: > The pcmcia/cardbus controller uses the Yenta driver (Ricoh RL5c475). > The pci card works in an older P4 machine, but in the Opteron board no > cards (either pcmcia and cardbus) are recognized (with the newer pccard > utils). Older kernels (now running 2.6.17.13) sometime reportes > something like: > "CS: unable to apply power" (the cards don't seem to get any power (no > leds are on and they remain cold)). > With 2.6.17.x there is no response at all on insertion, but the kernel > warns that the pccard utils are using deprecated calls.
[snip problems] You'd better ask such hardware questions on the linux-kernel mailing list ([email protected]). Be sure to try the latest kernel (2.6.18-rc7 at time of writing) before you do, or otherwise that will be the first question. Erik -- +-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 -- | Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
