Lennart Sorensen ([EMAIL PROTECTED]) wrote: > On Wed, Aug 17, 2005 at 05:33:50PM -0500, Ardo van Rangelrooij wrote: > > 2.6.11: > > > > BIOS-provided physical RAM map: > > ACPI: IRQ0 used by override. > > ACPI: IRQ2 used by override. > > ACPI: IRQ9 used by override. > > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA > > ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA > > Probing IDE interface ide0... > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > Probing IDE interface ide1... > > ide1 at 0x170-0x177,0x376 on irq 15 > > Probing IDE interface ide2... > > Probing IDE interface ide3... > > Probing IDE interface ide4... > > Probing IDE interface ide5... > > /dev/ide/host0/bus0/target1/lun0: p1 > > /dev/ide/host0/bus1/target0/lun0: p1 > > /dev/ide/host0/bus1/target1/lun0: p1 > > > > 2.6.12: > > > > BIOS-provided physical RAM map: > > ACPI: IRQ0 used by override. > > ACPI: IRQ2 used by override. > > ACPI: IRQ9 used by override. > > Boot video device is 0000:01:00.0 > > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > Probing IDE interface ide0... > > Probing IDE interface ide1... > > Probing IDE interface ide2... > > Probing IDE interface ide3... > > Probing IDE interface ide4... > > Probing IDE interface ide5... > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > /dev/ide/host0/bus0/target1/lun0: p1 > > /dev/ide/host1/bus0/target0/lun0: p1 > > /dev/ide/host1/bus0/target1/lun0: p1 > > VP_IDE: port 0x01f0 already claimed by ide0 > > VP_IDE: port 0x0170 already claimed by ide1 > > That is certainly the generic driver loading instead on 2.6.12. > > > and dmesg | grep VP_IDE gives: > > > > 2.6.11: > > > > VP_IDE: IDE controller at PCI slot 0000:00:0f.1 > > VP_IDE: chipset revision 6 > > VP_IDE: not 100% native mode: will probe irqs later > > VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 > > > > 2.6.12: > > > > VP_IDE: IDE controller at PCI slot 0000:00:0f.1 > > VP_IDE: chipset revision 6 > > VP_IDE: not 100% native mode: will probe irqs later > > VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 > > VP_IDE: port 0x01f0 already claimed by ide0 > > VP_IDE: port 0x0170 already claimed by ide1 > > VP_IDE: neither IDE port enabled (BIOS) > > > > And when doing lsmod, 2.6.11 has via82cxxx immediately after ide-core and > > way > > before ide-generic, while 2.6.12 has ide-generic followed by via82cxxx. > > Yeah initrd has the load order wrong on 2.6.12 then.
Is there a bug report I should file somewhere? > > Using /etc/modules doesn't work, since discover and company already have > > done > > the damage. > > /etc/modules runs before discover as far as I know. initrd may already Yes, you're right. It's initrd doing the damage. > have done it. adding the via82cxxx driver (check name to be sure) to > /etc/mkinitrd/modules and then rebuilding the /boot/initrd image for > your kernel should help. Anything you list explicitly is loaded first > by initrd. And that indeed did the trick. All is well now. :-) Thanks! Thanks, Ardo -- Ardo van Rangelrooij Debian XML/SGML Group <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> http://people.debian.org/~ardo/ http://debian-xml-sgml.alioth.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
