On Sun, Mar 20, 2005 at 12:44:42AM +0100, Uwe wrote: > here is the corresponding snippet of dmesg. > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > SIS5513: IDE controller at PCI slot 0000:00:02.5 > SIS5513: chipset revision 1 > SIS5513: not 100% native mode: will probe irqs later > Probing IDE interface ide0... > hda: IC35L080AVVA07-0, ATA DISK drive > hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive > Probing IDE interface ide1... > hdc: HDS722525VLAT80, ATA DISK drive > Probing IDE interface ide2... > Probing IDE interface ide3... > Probing IDE interface ide4... > Probing IDE interface ide5... > elevator: using anticipatory as default io scheduler > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 128KiB > hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63 > hda: cache flushes supported > /dev/ide/host0/bus0/target0/lun0: p1 p2 > hdc: max request size: 1024KiB > hdc: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63 > hdc: cache flushes supported > /dev/ide/host1/bus0/target0/lun0: p1
Well it does appear that the SIS driver is loading first as far as I can see. Too bad that driver doesn't seem to tell you what mode it runs the disks at. > my harddrives are both newer hitachi 80/250GB. I commented out the generic > part in /etc/modules and added sis5513 at the first line. but lsmod still > mentions this: > > ide_core 146948 28 > ide_cd,ide_generic,via82cxxx,trm290,triflex,slc90e66,sis5513,siimage,serverworks,sc1200,rz1000,piix,pdc202xx_old,opti621,ns87415,hpt366,ide_disk,hpt34x,generic,cy82c693,cs5530,cs5520,cmd64x,atiixp,amd74xx,alim15x3,aec62xx,pdc202xx_new > > this looks horrible to me. i don't know, how that hotplug-thing is working > maybe it is due some action it does... Does lsmod show sis driver? If so what is the usage count for it? Is there anything in /proc/ide for the sis or in hd*/settings that shows a value for dma? I don't personally deal with SiS stuff when I can avoid it. Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
