The only way to update a live CD is to install from it. Then you can update.
But as you said "the point is MOOT". DR On Sat, Jun 3, 2023 at 11:16 PM K0LNY <glenn@ervin.email> wrote: > > All that would have helped to begin with, but since it wouldn't update, I > guess the point is mute. > > ----- Original Message ----- > From: "D.J.J. Ring, Jr." <n...@arrl.net> > To: "K0LNY" <glenn@ervin.email> > Cc: <debian-accessibility@lists.debian.org> > Sent: Saturday, June 3, 2023 10:14 PM > Subject: Re: Old Debian and Starting A Service > > > It's a live Command Line Interface CD. It boots into the system. > h is for help. Or you can type the whole command "help". > h or "help" opens up help.txt in nano. > Capital V in "install Vinux to hard drive". > > Vinux CLI max comes with ssh server and client installed. > > menu runs pdmenu which is that ASCII graphics menu. > > n runs cnetworkmanager. > > It's all in help.txt which you can read (it speaks) with command h or "help" > > BRGDS, > David > > On Sat, Jun 3, 2023 at 10:50 PM K0LNY <glenn@ervin.email> wrote: > > > > I thought it said type help for help, and I kept trying typing help and > > got > > no help. > > > > ----- Original Message ----- > > From: "D.J.J. Ring, Jr." <n...@arrl.net> > > To: "K0LNY" <glenn@ervin.email> > > Cc: <debian-accessibility@lists.debian.org> > > Sent: Saturday, June 3, 2023 9:45 PM > > Subject: Re: Old Debian and Starting A Service > > > > > > Glenn, > > > > You said "Yeah, I got it to boot up but I couldn't get into it, and I > > got no guidance > > on upgrading it, so it was a non-starter.". > > > > If you're talking about Vinux 2.1 Debian CLI (we talked about the > > Debian and the Ubuntu versions of Vinux, so I don't know which you are > > referring to) it opens up talking with instructions. > > > > Vinux 2.1 is the best documented distro I've ever seen. > > When it boots, it beeps, but do nothing, just wait 40 seconds, then > > the prompt will appear. There is writing on the screen that doesn't > > speak. > > > > The writing just says "type h" for help. > > If you type "h" at the prompt, an amazing document of help appears. > > > > Did you get that far, Glenn? > > > > BRGDS, > > David > > > > On Sat, Jun 3, 2023 at 10:04 PM K0LNY <glenn@ervin.email> wrote: > > > > > > Yeah, I got it to boot up, but I couldn't get into it, and I got no > > > guidance > > > on upgrading it, so it was a non-starter. > > > Anyway, I got Debian 11.7 installed, I just have to set up the WIFI > > > again. > > > Last time I did this, it was on the same i386 machine, but on a 32 gb SD > > > card in the card slot. > > > I wanted to put a good working image on the internal 4 GB SSD and then > > > make > > > an image of it, so I can restore it if I need to. > > > > > > Glenn > > > ----- Original Message ----- > > > From: "D.J.J. Ring, Jr." <n...@arrl.net> > > > To: "K0LNY" <glenn@ervin.email> > > > Cc: <debian-accessibility@lists.debian.org> > > > Sent: Saturday, June 3, 2023 8:53 PM > > > Subject: Re: Old Debian and Starting A Service > > > > > > > > > Vinux 2.1 CLI Max is based on Lenny Debian 5.0.10, it's a x686 32bit > > > system. Works fine here. > > > > > > Vinux 3 and later are all based on Ubuntu and are (sadly) Graphic User > > > Interface. They have the Command Line Interface of course, but they > > > have a GUI already installed. > > > > > > BRGDS, > > > David > > > > > > On Sat, Jun 3, 2023 at 7:10 PM K0LNY <glenn@ervin.email> wrote: > > > > > > > > Well I can't get the image to boot a second time. > > > > I may need to find a newer Vinux. > > > > I read the screen while it was trying to boot, with my iPhone, and > > > > this > > > > Vinux CLI only, is Debian 1.10.22. > > > > Glenn > > > > > > > > ----- Original Message ----- > > > > From: K0LNY > > > > To: debian-accessibility@lists.debian.org > > > > Sent: Saturday, June 3, 2023 4:05 PM > > > > Subject: Old Debian and Starting A Service > > > > > > > > Hi, > > > > I thought I'd give this old Vinux 2.1 CLI a go on the Asus 701, to see > > > > if > > > > I can upgrade it little by little. > > > > I have been looking for older Debian commands to start SSH. > > > > I tried to apt-get install SSH, and it said it is already running the > > > > latest, which is the latest for it's package, which I don't know is > > > > Debian > > > > 2.1, because it's Vinux 2.1. > > > > But it does not know systemd or systemctl. > > > > So I don't know how to get the service running. > > > > It seems to have no WIFI, but I tried to find its IP address with > > > > hostname -I > > > > and it was before the capitol I was used, so I found the IP with a > > > > small > > > > I. > > > > But the connection is still refused. > > > > I tried to update, and it said it is updated already. > > > > I also don't know the upgrade command for older Debian. > > > > So if anyone remembers, thanks for any info. > > > > Glenn > > > > > >
