Re: Voxin

[Vojtech šmiro]

OK, but I am afraid I am destroying my Pi when I am running 64bit system 
and 32bit app such as Voxin.

Best regards
Vojta.

Dne 04. 11. 22 v 18:29 K0LNY_Glenn napsal(a):
Hi,
Yes, my Voxin 3X works on my Raspberry PIs too.
But not on an Asus 701 with a 32 bit processor.
I'm running Debian Bullseye 32 bit.
I suspect contacting Oralux will help anyone here understand that Oralux has
not yet gotten Voxin 3X to work on 32 bit systems.
Raspberry PIs are using ARM processors.
Glenn
----- Original Message -----
From: "Vojtech šmiro" <vsm...@seznam.cz>
To: <debian-accessibility@lists.debian.org>
Sent: Friday, November 04, 2022 12:23 PM
Subject: Voxin


Hello,

I have Raspberry Pi 4B 4 GB Ram and Ubuntu Mate 22.04 32bit. And there
Voxin works, but is slow and there are some noises like old gramophone
desk during work so Voxin is usable only for reading texts. But Czech
Zuzana and Iveta voices has several dictionaries problems due Nuance
voice data problems, so I prefer Espeak. I prefer Espeak before all
modern voices. iPhone Nuance voices has more problems than in linux,
because linux version has older voice data, that's luck for all users.

Thanks.

Best regards

Vojta.

Dne 04. 11. 22 v 18:12 K0LNY_Glenn napsal(a):
Maybe you have a 32 bit OS on a 64 bit processor?

----- Original Message -----
From: "Vojtech šmiro" <vsm...@seznam.cz>
To: "K0LNY_Glenn" <glenn@ervin.email>
Sent: Friday, November 04, 2022 12:11 PM
Subject: Re: Hi Glen,


And why it works on 32bit Ubuntu on _Rpi?

Dne 04. 11. 22 v 17:53 K0LNY_Glenn napsal(a):
Hi Vojta,
I have the latest Voxin in a couple voices, but Voxin 2X is what has to
be
used for a 32 bit system.
Glenn
----- Original Message -----
From: "Vojtech šmiro" <vsm...@seznam.cz>
To: <debian-accessibility@lists.debian.org>
Sent: Friday, November 04, 2022 11:37 AM
Subject: Hi Glen,



why don't you upgrade Voxin? Voxin link what you purchased will work and
download the newest version.

And why I can use Voxin 3.3RC6 in Ubuntu Mate 22.04 32bit if Voxin is
only for 64bit?

Best regards

Vojta.
Dne 04. 11. 22 v 16:39 K0LNY_Glenn napsal(a):
I ran  the following:
sudo adduser audio lenny
and I got the message that lenny was already a member of audio.
speaker-test works  as sudo, but no sound without sudo.
Just like spd-say, no errors, just no audio without sudo.
Any ideas?
Thanks.
Glenn
----- Original Message -----
From: "K0LNY_Glenn" <glenn@ervin.email>
To: "K0LNY_Glenn" <glenn@ervin.email>; "Samuel Thibault"
<sthiba...@debian.org>
Cc: <debian-accessibility@lists.debian.org>
Sent: Thursday, November 03, 2022 2:44 PM
Subject: Re: Voxin Almost Works


Well here's an update.
It seems that Bullseye no longer uses /etc/rc.local, I created the file,
but
my command:
sudo /usr/bin/speakupconf load
didn't work.
So I put it in crontab
sudo crontab -e
and I added:
@reboot sudo speakupconf load

and my saved settings get loaded.
But it is back to using eSpeak.
spd-say test, without sudo is still silent
but with sudo, I get Voxin.
So, espeakup, or just speakup, whichever I'm using, is not runing as
sudo,
which I wonder is why it is defaulting to espeak.
Any ideas on fixing this?

Thanks.

Glenn

----- Original Message -----
From: "K0LNY_Glenn" <glenn@ervin.email>
To: "Samuel Thibault" <sthiba...@debian.org>
Cc: <debian-accessibility@lists.debian.org>
Sent: Wednesday, November 02, 2022 1:19 PM
Subject: Re: Voxin Almost Works


Where here is a bit of change that happened since my last message.
I installed git, and did the gitclone for speakup.
This was after I just uninstalled espeakup.
So the gitclone of speakup gave me no errors, but speakup does not work.
However, when I do spd-say test now, Voxin works, I just don't seem to
have
a screenreader.
I got speakup with:
git clone https://github.com/linux-speakup/speakup.git speakupdir

I got it from github because my apt install could not locate the package
speakup.
Glenn
----- Original Message -----
From: "Samuel Thibault" <sthiba...@debian.org>
To: "K0LNY_Glenn" <glenn@ervin.email>
Cc: <debian-accessibility@lists.debian.org>
Sent: Wednesday, November 02, 2022 1:12 PM
Subject: Re: Voxin Almost Works


K0LNY_Glenn, le mer. 02 nov. 2022 13:07:05 -0500, a ecrit:
I just looked, the other day you suggested I increase the log level,
and
at
that time in speechd.conf I changed it to 4, it says 5 is not
recommended
so
you are still getting level 4, I just checked.

4 should be enough, yes. So, are the log files really completely empty
after having run spd-say?

Samuel