Package: brltty-espeak
Version: 5.4-3
Severity: important
Hi
after an upgrade of brltty-espeak (which links to espeak-ng), the speech output
is very monotonous and all speech rhythm lost, including e.g. breaks for periods
at the end of a sentence.
That makes it hard to listen to it for a longer period. It is likely to be a
brltty-espeak issue, because
espeak-ng -w test.wav "Some longer text, it has proper stressing of
words."
aplay test.wav
sounds as `espeak -w test.wav ...`, so without any change.
Furthermore, there is a noticeable delay when interrupting speech with e.g. the
control key. This is problematic when scrolling through texts, because some
portion of the old line is spoken before the new text starts. This makes it
impossible for speech-only users to figure out what is actually on the line
I have taken a log with `brltty -ldebug,speech` and have attached it.
Please let me know if I can provide more information to help resolving this
issue.
Thanks
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing'), (10, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 4.8.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages brltty-espeak depends on:
ii brltty 5.4-3
ii libc6 2.24-7
ii libespeak-ng1 1.49.0+dfsg-2
brltty-espeak recommends no packages.
brltty-espeak suggests no packages.
-- no debconf information
2016-12-13@09:44:11.261 [brltty] BRLTTY 5.4 rev BRLTTY-5.4 [http://brltty.com/]
2016-12-13@09:44:11.283 [brltty] lock descriptor allocated:
queue-discarded-elements
2016-12-13@09:44:11.283 [brltty] Protokollierungsausführlichkeit: debug,speech
2016-12-13@09:44:11.284 [brltty] pushed command environment: initial
2016-12-13@09:44:11.284 [brltty] report listener registered: 0:
handleUpdateBrailleOnline
2016-12-13@09:44:11.285 [brltty] program exit event added: screen-data
2016-12-13@09:44:11.285 [brltty] Arbeitsverzeichnis: /home/swannie
2016-12-13@09:44:11.285 [brltty] Konfigurationsdatei: /etc/brltty.conf
2016-12-13@09:44:11.285 [brltty] Modifizierbares Verzeichnis: /var/lib/brltty
2016-12-13@09:44:11.285 [brltty] Einstellungsdatei: brltty.prefs
2016-12-13@09:44:11.285 [brltty] Verzeichnis mit Schreibzugriff: /var/run/brltty
2016-12-13@09:44:11.285 [brltty] Treiber-Verzeichnis: /lib/brltty
2016-12-13@09:44:11.285 [brltty] Tabellenverzeichnis: /etc/brltty
2016-12-13@09:44:11.306 [brltty] program exit event added: tunes
2016-12-13@09:44:11.306 [brltty] tune thread state change: 0 -> 1
2016-12-13@09:44:11.307 [brltty] tune thread state change: 1 -> 3
2016-12-13@09:44:11.307 [brltty] regions: text=0.0 status=0.0
2016-12-13@09:44:11.307 [brltty] shifts: full=1 half=0 vertical=5
2016-12-13@09:44:11.307 [brltty] checking for text table:
/etc/brltty/Text/de_DE.ttb
2016-12-13@09:44:11.349 [brltty] checking for text table:
/etc/brltty/Text/de.ttb
2016-12-13@09:44:11.364 [brltty] compiling text table: /etc/brltty/Text/de.ttb
2016-12-13@09:44:11.364 [brltty] file opened: /etc/brltty/Text/de.ttb fd=8
2016-12-13@09:44:11.364 [brltty] including data file: /etc/brltty/Text/de.ttb
2016-12-13@09:44:11.371 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti
fd=9
2016-12-13@09:44:11.371 [brltty] including data file:
/etc/brltty/Text/ltr-latin.tti
2016-12-13@09:44:11.382 [brltty] file opened: /etc/brltty/Text/ltr-alias.tti
fd=10
2016-12-13@09:44:11.382 [brltty] including data file:
/etc/brltty/Text/ltr-alias.tti
2016-12-13@09:44:11.389 [brltty] file opened: /etc/brltty/Text/ctl-latin.tti
fd=9
2016-12-13@09:44:11.390 [brltty] including data file:
/etc/brltty/Text/ctl-latin.tti
2016-12-13@09:44:11.398 [brltty] file opened: /etc/brltty/Text/num-dot6.tti fd=9
2016-12-13@09:44:11.398 [brltty] including data file:
/etc/brltty/Text/num-dot6.tti
2016-12-13@09:44:11.398 [brltty] file opened: /etc/brltty/Text/num-alias.tti
fd=10
2016-12-13@09:44:11.398 [brltty] including data file:
/etc/brltty/Text/num-alias.tti
2016-12-13@09:44:11.400 [brltty] file opened: /etc/brltty/Text/common.tti fd=9
2016-12-13@09:44:11.400 [brltty] including data file:
/etc/brltty/Text/common.tti
2016-12-13@09:44:11.401 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=10
2016-12-13@09:44:11.401 [brltty] including data file:
/etc/brltty/Text/spaces.tti
2016-12-13@09:44:11.415 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=10
2016-12-13@09:44:11.415 [brltty] including data file: /etc/brltty/Text/boxes.tti
2016-12-13@09:44:11.417 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=10
2016-12-13@09:44:11.417 [brltty] including data file:
/etc/brltty/Text/blocks.tti
2016-12-13@09:44:11.417 [brltty] Texttabelle: de
2016-12-13@09:44:11.417 [brltty] program exit event added: text-table
2016-12-13@09:44:11.418 [brltty] Attributtabelle: left_right
2016-12-13@09:44:11.418 [brltty] program exit event added: attributes-table
2016-12-13@09:44:11.418 [brltty] program exit event added: contraction-table
2016-12-13@09:44:11.418 [brltty] Kurzschrifttabelle: keine
2016-12-13@09:44:11.418 [brltty] Keyboard Property: type=
2016-12-13@09:44:11.418 [brltty] Keyboard Property: vendor=
2016-12-13@09:44:11.418 [brltty] Keyboard Property: product=
2016-12-13@09:44:11.418 [brltty] program exit event added: keyboard-table
2016-12-13@09:44:11.418 [brltty] compiling keyboard table:
/etc/brltty/Keyboard/laptop.ktb
2016-12-13@09:44:11.418 [brltty] program exit event added: sorted-command-table
2016-12-13@09:44:11.419 [brltty] file opened: /etc/brltty/Keyboard/laptop.ktb
fd=8
2016-12-13@09:44:11.419 [brltty] including data file:
/etc/brltty/Keyboard/laptop.ktb
2016-12-13@09:44:11.435 [brltty] file opened: /etc/brltty/Keyboard/kp_say.kti
fd=9
2016-12-13@09:44:11.435 [brltty] including data file:
/etc/brltty/Keyboard/kp_say.kti
2016-12-13@09:44:11.436 [brltty] file opened: /etc/brltty/Keyboard/kp_speak.kti
fd=9
2016-12-13@09:44:11.436 [brltty] including data file:
/etc/brltty/Keyboard/kp_speak.kti
2016-12-13@09:44:11.437 [brltty] program exit event added: keyboard-monitor
2016-12-13@09:44:11.438 [brltty] activity action request: keyboard-monitor:
start
2016-12-13@09:44:11.438 [brltty] activity state change: keyboard-monitor:
4[preparing]
2016-12-13@09:44:11.438 [brltty] activity state change: keyboard-monitor:
1[prepared]
2016-12-13@09:44:11.438 [brltty] activity state change: keyboard-monitor:
2[scheduled]
2016-12-13@09:44:11.438 [brltty] constructing special screen: help
2016-12-13@09:44:11.440 [brltty] Tastaturtabelle: laptop
2016-12-13@09:44:11.440 [brltty] program exit event added: screen-driver
2016-12-13@09:44:11.440 [brltty] activity action request: screen-driver: start
2016-12-13@09:44:11.440 [brltty] activity state change: screen-driver:
4[preparing]
2016-12-13@09:44:11.440 [brltty] activity state change: screen-driver:
1[prepared]
2016-12-13@09:44:11.440 [brltty] activity state change: screen-driver:
2[scheduled]
2016-12-13@09:44:11.440 [brltty] BrlAPI Server: release 0.6.5
2016-12-13@09:44:11.440 [brltty] API Parameter: auth=
2016-12-13@09:44:11.440 [brltty] API Parameter: host=
2016-12-13@09:44:11.440 [brltty] API Parameter: stacksize=
2016-12-13@09:44:11.440 [brltty] program exit event added: address-table
2016-12-13@09:44:11.440 [brltty] program exit event added: api-server
2016-12-13@09:44:11.440 [brltty] program exit event added: braille-data
2016-12-13@09:44:11.440 [brltty] program exit event added: braille-driver
2016-12-13@09:44:11.440 [brltty] activity action request: braille-driver: start
2016-12-13@09:44:11.440 [brltty] activity state change: braille-driver:
4[preparing]
2016-12-13@09:44:11.440 [brltty] Braille Display Dimensions: 1 row, 1 column
2016-12-13@09:44:11.440 [brltty] regions: text=0.1 status=0.0
2016-12-13@09:44:11.440 [brltty] shifts: full=1 half=0 vertical=5
2016-12-13@09:44:11.440 [brltty] activity state change: braille-driver:
1[prepared]
2016-12-13@09:44:11.441 [brltty] activity state change: braille-driver:
2[scheduled]
2016-12-13@09:44:11.441 [brltty] program exit event added: speech-data
2016-12-13@09:44:11.441 [brltty] program exit event added: speech-driver
2016-12-13@09:44:11.441 [brltty] activity action request: speech-driver: start
2016-12-13@09:44:11.441 [brltty] activity state change: speech-driver:
4[preparing]
2016-12-13@09:44:11.441 [brltty] activity state change: speech-driver:
1[prepared]
2016-12-13@09:44:11.441 [brltty] activity state change: speech-driver:
2[scheduled]
2016-12-13@09:44:11.441 [brltty] Speech Input: keine
2016-12-13@09:44:11.441 [brltty] program exit event added: sessions
2016-12-13@09:44:11.441 [brltty] pushed command environment: main
2016-12-13@09:44:11.441 [brltty] pushed command handler: unhandled
2016-12-13@09:44:11.441 [brltty] pushed command handler: miscellaneous
2016-12-13@09:44:11.441 [brltty] pushed command handler: learn
2016-12-13@09:44:11.441 [brltty] pushed command handler: speech
2016-12-13@09:44:11.441 [brltty] pushed command handler: clipboard
2016-12-13@09:44:11.441 [brltty] pushed command handler: preferences
2016-12-13@09:44:11.441 [brltty] pushed command handler: toggle
2016-12-13@09:44:11.441 [brltty] report listener registered: 3:
brailleWindowUpdatedListener
2016-12-13@09:44:11.442 [brltty] pushed command handler: touch
2016-12-13@09:44:11.442 [brltty] report listener registered: 0:
keycodeCommandDataResetListener
2016-12-13@09:44:11.442 [brltty] pushed command handler: keycodes
2016-12-13@09:44:11.442 [brltty] report listener registered: 0:
inputCommandDataResetListener
2016-12-13@09:44:11.442 [brltty] pushed command handler: input
2016-12-13@09:44:11.442 [brltty] pushed command handler: navigation
2016-12-13@09:44:11.442 [brltty] pushed command handler: screen
2016-12-13@09:44:11.442 [brltty] pushed command handler: custom
2016-12-13@09:44:11.442 [brltty] pushed command handler: API
2016-12-13@09:44:11.442 [brltty] activity state change: keyboard-monitor:
6[starting]
2016-12-13@09:44:11.442 [brltty] searching for keyboards
2016-12-13@09:44:11.443 [brltty] checking input device: event10: bus=0000
vnd=0000 prd=0000 ver=0000 tpl=ALSA nam=HDA Intel Headphone
2016-12-13@09:44:11.458 [brltty] checking input device: event9: bus=0000
vnd=0000 prd=0000 ver=0000 tpl=ALSA nam=HDA Intel Mic
2016-12-13@09:44:11.474 [brltty] checking input device: event8: bus=0003
vnd=0AC8 prd=C33F ver=0100 tpl=usb-0000:00:1d.7-8/button nam=WebCam SCB-0340N
2016-12-13@09:44:11.474 [brltty] starting host command: /sbin/modprobe -q uinput
2016-12-13@09:44:11.505 [brltty] host command exit status: 0: /sbin/modprobe
2016-12-13@09:44:11.506 [brltty] activity state change: screen-driver:
6[starting]
2016-12-13@09:44:11.506 [brltty] checking for screen driver: lx
2016-12-13@09:44:11.519 [brltty] initializing screen driver: lx
2016-12-13@09:44:11.519 [brltty] device directory: /dev
2016-12-13@09:44:11.519 [brltty] checking screen device: /dev/vcsa
2016-12-13@09:44:11.519 [brltty] screen device: vcsa
2016-12-13@09:44:11.519 [brltty] checking console device: /dev/tty0
2016-12-13@09:44:11.519 [brltty] console device: tty0
2016-12-13@09:44:11.519 [brltty] device opened: /dev/tty1: fd=17
2016-12-13@09:44:11.519 [brltty] device opened: /dev/vcsa: fd=18
2016-12-13@09:44:11.519 [brltty] checking uinput device: /dev/uinput
2016-12-13@09:44:11.519 [brltty] uinput device: uinput
2016-12-13@09:44:11.520 [brltty] device opened: /dev/uinput: fd=20
2016-12-13@09:44:11.520 [brltty] uinput opened: uinput fd=20
2016-12-13@09:44:11.521 [brltty] report listener registered: 1:
lxBrailleOfflineListener
2016-12-13@09:44:11.521 [brltty] Bildschirmtreiber: lx [Linux]
2016-12-13@09:44:11.521 [brltty] Linux Screen Driver:
2016-12-13@09:44:11.521 [brltty] Bildschirm-Parameter: charset=
2016-12-13@09:44:11.522 [brltty] Bildschirm-Parameter: debugsfm=
2016-12-13@09:44:11.522 [brltty] Bildschirm-Parameter: hfb=
2016-12-13@09:44:11.522 [brltty] Bildschirm-Parameter: vt=
2016-12-13@09:44:11.522 [brltty] activity state change: screen-driver:
3[started]
2016-12-13@09:44:11.522 [brltty] activity state change: braille-driver:
6[starting]
2016-12-13@09:44:11.522 [brltty] checking braille device: usb:
2016-12-13@09:44:11.522 [brltty] performing braille driver autodetection
2016-12-13@09:44:11.522 [brltty] checking for braille driver: al
2016-12-13@09:44:11.523 [brltty] initializing braille driver: al -> usb:
2016-12-13@09:44:11.526 [brltty] Initialisierung des Brailletreibers
fehlgeschlagen: al -> usb:
2016-12-13@09:44:11.526 [brltty] checking for braille driver: bm
2016-12-13@09:44:11.536 [brltty] initializing braille driver: bm -> usb:
2016-12-13@09:44:11.536 [brltty] Initialisierung des Brailletreibers
fehlgeschlagen: bm -> usb:
2016-12-13@09:44:11.536 [brltty] checking for braille driver: bn
2016-12-13@09:44:11.537 [brltty] initializing braille driver: bn -> usb:
2016-12-13@09:44:11.537 [brltty] Initialisierung des Brailletreibers
fehlgeschlagen: bn -> usb:
2016-12-13@09:44:11.537 [brltty] checking for braille driver: eu
2016-12-13@09:44:11.538 [brltty] initializing braille driver: eu -> usb:
2016-12-13@09:44:11.538 [brltty] Initialisierung des Brailletreibers
fehlgeschlagen: eu -> usb:
2016-12-13@09:44:11.538 [brltty] checking for braille driver: fs
2016-12-13@09:44:11.539 [brltty] initializing braille driver: fs -> usb:
2016-12-13@09:44:11.539 [brltty] Initialisierung des Brailletreibers
fehlgeschlagen: fs -> usb:
2016-12-13@09:44:11.539 [brltty] checking for braille driver: hd
2016-12-13@09:44:11.540 [brltty] initializing braille driver: hd -> usb:
2016-12-13@09:44:11.547 [brltty] USB: Manufacturer Name: Hedo Reha Technik GmbH
2016-12-13@09:44:11.550 [brltty] USB: Product Description: MobilLine USB
2016-12-13@09:44:11.553 [brltty] USB: Serial Number: ML-I-006
2016-12-13@09:44:11.558 [brltty] program exit event added:
sorted-usb-serial-adapters
2016-12-13@09:44:11.564 [brltty] activity state change: speech-driver:
6[starting]
2016-12-13@09:44:11.564 [brltty] checking for speech driver: es
2016-12-13@09:44:11.637 [brltty] initializing speech driver: es
2016-12-13@09:44:11.637 [brltty] speech: driver thread constructing
2016-12-13@09:44:11.638 [speech-driver] speech: driver thread starting
2016-12-13@09:44:11.638 [speech-driver] speech: starting driver
2016-12-13@09:44:11.638 [brltty] device opened: /dev/tty0: fd=28
2016-12-13@09:44:11.638 [speech-driver] eSpeak version 1.48.15 16.Apr.15
2016-12-13@09:44:11.921 [speech-driver] speech: driver thread ready
2016-12-13@09:44:11.921 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:11.921 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:11.922 [brltty] Sprachausgabentreiber: es [eSpeak]
2016-12-13@09:44:11.922 [brltty] eSpeak Speech Driver: version 0.3
2016-12-13@09:44:11.922 [brltty] Sprachausgaben-Parameter: path=
2016-12-13@09:44:11.922 [brltty] Sprachausgaben-Parameter: punctlist=
2016-12-13@09:44:11.922 [brltty] Sprachausgaben-Parameter: voice=de
2016-12-13@09:44:11.922 [brltty] Sprachausgaben-Parameter: maxrate=
2016-12-13@09:44:11.922 [brltty] speech: set volume: 10
2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: set volume
2016-12-13@09:44:11.922 [brltty] speech: sending speech request: set volume
2016-12-13@09:44:11.922 [brltty] speech: set rate: 10
2016-12-13@09:44:11.922 [speech-driver] speech: handling speech request: set
volume
2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: set rate
2016-12-13@09:44:11.922 [brltty] speech: set pitch: 10
2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: set pitch
2016-12-13@09:44:11.922 [brltty] speech: set punctuation: 1
2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: set
punctuation
2016-12-13@09:44:11.922 [brltty] speech: say: BRLTTY 5.4 rev BRLTTY-5.4
2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:11.922 [brltty] activity state change: speech-driver:
3[started]
2016-12-13@09:44:11.922 [brltty] Short Packet: 00
2016-12-13@09:44:11.922 [brltty] Short Packet: 00
2016-12-13@09:44:11.922 [brltty] Short Packet: 00
2016-12-13@09:44:11.922 [brltty] Short Packet: 00
2016-12-13@09:44:11.922 [brltty] Short Packet: 00
2016-12-13@09:44:11.922 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Short Packet: 00
2016-12-13@09:44:11.923 [brltty] Braille Display Dimensions: 1 row, 40 columns
2016-12-13@09:44:11.923 [brltty] regions: text=0.40 status=0.0
2016-12-13@09:44:11.923 [brltty] shifts: full=40 half=20 vertical=5
2016-12-13@09:44:11.923 [brltty] Tastenbelegungen: mbl
2016-12-13@09:44:11.931 [brltty] file opened: /etc/brltty/Input/hd/mbl.ktb fd=29
2016-12-13@09:44:11.931 [brltty] including data file:
/etc/brltty/Input/hd/mbl.ktb
2016-12-13@09:44:11.947 [brltty] file opened:
/etc/brltty/Input/hd/../toggle.kti fd=30
2016-12-13@09:44:11.947 [brltty] including data file:
/etc/brltty/Input/hd/../toggle.kti
2016-12-13@09:44:11.956 [brltty] file opened:
/etc/brltty/Input/hd/../toggle.kti fd=30
2016-12-13@09:44:11.956 [brltty] including data file:
/etc/brltty/Input/hd/../toggle.kti
2016-12-13@09:44:11.956 [brltty] file opened:
/etc/brltty/Input/hd/../toggle.kti fd=30
2016-12-13@09:44:11.956 [brltty] including data file:
/etc/brltty/Input/hd/../toggle.kti
2016-12-13@09:44:11.956 [brltty] file opened:
/etc/brltty/Input/hd/../toggle.kti fd=30
2016-12-13@09:44:11.956 [brltty] including data file:
/etc/brltty/Input/hd/../toggle.kti
2016-12-13@09:44:11.956 [brltty] file opened:
/etc/brltty/Input/hd/../toggle.kti fd=30
2016-12-13@09:44:11.956 [brltty] including data file:
/etc/brltty/Input/hd/../toggle.kti
2016-12-13@09:44:11.957 [brltty] file opened:
/etc/brltty/Input/hd/../toggle.kti fd=30
2016-12-13@09:44:11.957 [brltty] including data file:
/etc/brltty/Input/hd/../toggle.kti
2016-12-13@09:44:11.957 [brltty] Tastentabelle: /etc/brltty/Input/hd/mbl.ktb
2016-12-13@09:44:11.958 [brltty] report listener registered: 0:
brlapi_handleReports
2016-12-13@09:44:11.958 [brltty] Brailletreiber: hd [Hedo]
2016-12-13@09:44:11.959 [brltty] Hedo Braille Driver:
2016-12-13@09:44:11.959 [brltty] Braillegerät: usb:
2016-12-13@09:44:11.959 [brltty] Alte Einstellungsdatei: /etc/brltty-hd.prefs
2016-12-13@09:44:11.959 [brltty] cannot open file: /etc/brltty-hd.prefs: Datei
oder Verzeichnis nicht gefunden
2016-12-13@09:44:11.959 [brltty] regions: text=0.40 status=0.0
2016-12-13@09:44:11.959 [brltty] shifts: full=40 half=20 vertical=5
2016-12-13@09:44:11.959 [brltty] speech: set volume: 10
2016-12-13@09:44:11.959 [brltty] speech: enqueuing speech request: set volume
2016-12-13@09:44:11.959 [brltty] speech: set rate: 10
2016-12-13@09:44:11.959 [brltty] speech: enqueuing speech request: set rate
2016-12-13@09:44:11.959 [brltty] speech: set pitch: 10
2016-12-13@09:44:11.959 [brltty] speech: enqueuing speech request: set pitch
2016-12-13@09:44:11.959 [brltty] speech: set punctuation: 1
2016-12-13@09:44:11.959 [brltty] speech: enqueuing speech request: set
punctuation
2016-12-13@09:44:11.959 [brltty] program exit event added: alert-tunes
2016-12-13@09:44:11.959 [brltty] activity state change: braille-driver:
3[started]
2016-12-13@09:44:11.959 [tune-thread] starting host command: /sbin/modprobe -q
pcspkr
2016-12-13@09:44:11.963 [tune-thread] host command exit status: 0:
/sbin/modprobe
2016-12-13@09:44:11.964 [tune-thread] console opened: fd=29
2016-12-13@09:44:11.964 [tune-thread] program exit event added: console-stream
2016-12-13@09:44:11.964 [tune-thread] beeper enabled
2016-12-13@09:44:11.964 [tune-thread] tone: MSecs:60 Freq:329
2016-12-13@09:44:11.972 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:11.972 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:11.972 [brltty] speech: sending speech request: set rate
2016-12-13@09:44:11.973 [speech-driver] speech: handling speech request: set
rate
2016-12-13@09:44:12.013 [brltty] checking uinput device: /dev/uinput
2016-12-13@09:44:12.014 [brltty] uinput device: uinput
2016-12-13@09:44:12.014 [brltty] device opened: /dev/uinput: fd=30
2016-12-13@09:44:12.014 [brltty] uinput opened: uinput fd=30
2016-12-13@09:44:12.023 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:12.025 [tune-thread] tone: MSecs:100 Freq:440
2016-12-13@09:44:12.078 [brltty] checking input device: event7: bus=0019
vnd=0000 prd=0006 ver=0000 tpl=LNXVIDEO/video/input0 nam=Video Bus
2016-12-13@09:44:12.094 [brltty] checking input device: event6: bus=0010
vnd=001F prd=0001 ver=0100 tpl=isa0061/input0 nam=PC Speaker
2016-12-13@09:44:12.130 [brltty] checking input device: event5: bus=0019
vnd=0000 prd=0001 ver=0000 tpl=LNXPWRBN/button/input0 nam=Power Button
2016-12-13@09:44:12.146 [brltty] checking input device: event4: bus=0019
vnd=0000 prd=0003 ver=0000 tpl=PNP0C0E/button/input0 nam=Sleep Button
2016-12-13@09:44:12.166 [brltty] checking input device: event3: bus=0019
vnd=0000 prd=0001 ver=0000 tpl=PNP0C0C/button/input0 nam=Power Button
2016-12-13@09:44:12.182 [brltty] checking input device: event2: bus=0019
vnd=0000 prd=0005 ver=0000 tpl=PNP0C0D/button/input0 nam=Lid Switch
2016-12-13@09:44:12.198 [brltty] checking input device: event1: bus=0011
vnd=0002 prd=000E ver=0000 tpl=isa0060/serio1/input0 nam=ETPS/2 Elantech
Touchpad
2016-12-13@09:44:12.198 [brltty] checking uinput device: /dev/uinput
2016-12-13@09:44:12.198 [brltty] uinput device: uinput
2016-12-13@09:44:12.198 [brltty] device opened: /dev/uinput: fd=30
2016-12-13@09:44:12.198 [brltty] uinput opened: uinput fd=30
2016-12-13@09:44:12.262 [brltty] checking input device: event0: bus=0011
vnd=0001 prd=0001 ver=AB41 tpl=isa0060/serio0/input0 nam=AT Translated Set 2
keyboard
2016-12-13@09:44:12.262 [brltty] checking uinput device: /dev/uinput
2016-12-13@09:44:12.262 [brltty] uinput device: uinput
2016-12-13@09:44:12.262 [brltty] device opened: /dev/uinput: fd=30
2016-12-13@09:44:12.262 [brltty] uinput opened: uinput fd=30
2016-12-13@09:44:12.265 [brltty] keyboard opened: /dev/input/event0: fd=19
2016-12-13@09:44:12.265 [brltty] checking input device: mouse0:
2016-12-13@09:44:12.294 [brltty] checking input device: mice:
2016-12-13@09:44:12.330 [brltty] keyboard search complete
2016-12-13@09:44:12.330 [brltty] activity state change: keyboard-monitor:
3[started]
2016-12-13@09:44:12.330 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-12-13@09:44:12.330 [brltty] pushed command environment: message
2016-12-13@09:44:12.330 [brltty] pushed command handler: message
2016-12-13@09:44:12.330 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:12.331 [brltty] speech: sending speech request: set pitch
2016-12-13@09:44:12.331 [speech-driver] speech: handling speech request: set
pitch
2016-12-13@09:44:12.381 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:12.381 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:12.381 [brltty] speech: sending speech request: set punctuation
2016-12-13@09:44:12.382 [speech-driver] speech: handling speech request: set
punctuation
2016-12-13@09:44:12.432 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:12.432 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:12.432 [brltty] speech: sending speech request: say text
2016-12-13@09:44:12.432 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:12.482 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:12.483 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:12.483 [brltty] speech: sending speech request: set volume
2016-12-13@09:44:12.483 [speech-driver] speech: handling speech request: set
volume
2016-12-13@09:44:12.483 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:12.483 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:12.483 [brltty] speech: sending speech request: set rate
2016-12-13@09:44:12.483 [speech-driver] speech: handling speech request: set
rate
2016-12-13@09:44:12.483 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:12.483 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:12.483 [brltty] speech: sending speech request: set pitch
2016-12-13@09:44:12.483 [speech-driver] speech: handling speech request: set
pitch
2016-12-13@09:44:12.483 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:12.483 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:12.483 [brltty] speech: sending speech request: set punctuation
2016-12-13@09:44:12.484 [speech-driver] speech: handling speech request: set
punctuation
2016-12-13@09:44:12.484 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:12.484 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:14.048 [tune-thread] beeper disabled
2016-12-13@09:44:14.936 [brltty] program exit event added: command-queue
2016-12-13@09:44:14.936 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:14.936 [brltty] popped command handler: message
2016-12-13@09:44:14.936 [brltty] popped command environment: message
2016-12-13@09:44:14.936 [brltty] report listener registered: 0:
brlapi_handleReports
2016-12-13@09:44:15.032 [brltty] command: 000030 (AUTOSPEAK: schalte
automatisches Sprechen ein/aus)
2016-12-13@09:44:15.032 [tune-thread] beeper enabled
2016-12-13@09:44:15.032 [tune-thread] tone: MSecs:30 Freq:587
2016-12-13@09:44:15.064 [tune-thread] tone: MSecs:30 Freq:0
2016-12-13@09:44:15.094 [tune-thread] tone: MSecs:30 Freq:783
2016-12-13@09:44:15.125 [tune-thread] tone: MSecs:30 Freq:0
2016-12-13@09:44:15.156 [tune-thread] tone: MSecs:30 Freq:1174
2016-12-13@09:44:15.814 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:15.814 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:15.814 [brltty] speech: autospeak: current line: [0,21] 0.128
2016-12-13@09:44:15.814 [brltty] speech: say: swannie@kleiner ~ :-) %
2016-12-13@09:44:15.814 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:15.814 [brltty] speech: sending speech request: say text
2016-12-13@09:44:15.814 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:15.864 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:15.865 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:17.171 [tune-thread] beeper disabled
2016-12-13@09:44:17.382 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:17.382 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:17.407 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:17.422 [brltty] speech: autospeak: characters inserted before
cursor: [0,21] 24.1
2016-12-13@09:44:17.422 [brltty] speech: say: v
2016-12-13@09:44:17.422 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:17.422 [brltty] speech: sending speech request: say text
2016-12-13@09:44:17.422 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:17.472 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:17.473 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:17.533 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:17.536 [brltty] speech: autospeak: characters inserted before
cursor: [0,21] 25.1
2016-12-13@09:44:17.536 [brltty] speech: say: i
2016-12-13@09:44:17.536 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:17.536 [brltty] speech: sending speech request: say text
2016-12-13@09:44:17.537 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:17.640 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:17.640 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:17.690 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:17.690 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:17.718 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:17.734 [brltty] speech: autospeak: characters inserted before
cursor: [0,21] 26.1
2016-12-13@09:44:17.734 [brltty] speech: say: m
2016-12-13@09:44:17.734 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:17.734 [brltty] speech: sending speech request: say text
2016-12-13@09:44:17.734 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:17.790 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:17.790 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:17.841 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:17.841 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:17.899 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:17.915 [brltty] speech: autospeak: line selected: [0,22] 0.128
2016-12-13@09:44:17.983 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:17.984 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:18.351 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:18.366 [brltty] speech: autospeak: characters inserted before
cursor: [0,22] 0.1
2016-12-13@09:44:18.366 [brltty] speech: say: i
2016-12-13@09:44:18.366 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:18.366 [brltty] speech: sending speech request: say text
2016-12-13@09:44:18.366 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:18.416 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:18.417 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:18.520 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:18.520 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:18.562 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:18.653 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:18.667 [brltty] speech: autospeak: line selected: [0,0] 0.128
2016-12-13@09:44:18.718 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 0.1
2016-12-13@09:44:18.719 [brltty] speech: say: T
2016-12-13@09:44:18.719 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:18.719 [brltty] speech: sending speech request: say text
2016-12-13@09:44:18.719 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:18.769 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:18.769 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:18.927 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:19.046 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:19.235 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:19.252 [brltty] speech: autospeak: characters deleted before
cursor: [0,0] 0.1
2016-12-13@09:44:19.252 [brltty] speech: say: T
2016-12-13@09:44:19.252 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:19.252 [brltty] speech: sending speech request: say text
2016-12-13@09:44:19.252 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:19.303 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:19.303 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:19.401 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:19.463 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:19.464 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:19.576 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:19.722 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:19.933 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.028 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.043 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 0.1
2016-12-13@09:44:20.043 [brltty] speech: say: T
2016-12-13@09:44:20.043 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:20.043 [brltty] speech: sending speech request: say text
2016-12-13@09:44:20.043 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:20.094 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:20.094 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:20.199 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.214 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 1.1
2016-12-13@09:44:20.214 [brltty] speech: say: h
2016-12-13@09:44:20.214 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:20.214 [brltty] speech: sending speech request: say text
2016-12-13@09:44:20.214 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:20.235 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:20.235 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:20.286 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:20.286 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:20.329 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.345 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 2.1
2016-12-13@09:44:20.345 [brltty] speech: say: i
2016-12-13@09:44:20.345 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:20.345 [brltty] speech: sending speech request: say text
2016-12-13@09:44:20.345 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:20.471 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:20.471 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:20.494 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.499 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 3.1
2016-12-13@09:44:20.499 [brltty] speech: say: s
2016-12-13@09:44:20.499 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:20.521 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:20.521 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:20.521 [brltty] speech: sending speech request: say text
2016-12-13@09:44:20.521 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:20.621 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:20.621 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:20.625 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.635 [brltty] speech: autospeak: word appended: [0,0] 0.4
2016-12-13@09:44:20.635 [brltty] speech: say: This
2016-12-13@09:44:20.635 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:20.671 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:20.671 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:20.671 [brltty] speech: sending speech request: say text
2016-12-13@09:44:20.671 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:20.756 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.771 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 5.1
2016-12-13@09:44:20.771 [brltty] speech: say: i
2016-12-13@09:44:20.771 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:20.792 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:20.792 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:20.842 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:20.843 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:20.843 [brltty] speech: sending speech request: say text
2016-12-13@09:44:20.843 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:20.871 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.886 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 6.1
2016-12-13@09:44:20.886 [brltty] speech: say: s
2016-12-13@09:44:20.886 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:20.971 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:20.986 [brltty] speech: autospeak: word appended: [0,0] 5.2
2016-12-13@09:44:20.986 [brltty] speech: say: is
2016-12-13@09:44:20.986 [brltty] speech: unqueuing speech request: say text
2016-12-13@09:44:20.986 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:21.049 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:21.049 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:21.100 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:21.100 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:21.100 [brltty] speech: sending speech request: say text
2016-12-13@09:44:21.100 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:21.172 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:21.187 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 8.1
2016-12-13@09:44:21.187 [brltty] speech: say: v
2016-12-13@09:44:21.187 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:21.199 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:21.199 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:21.250 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:21.250 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:21.250 [brltty] speech: sending speech request: say text
2016-12-13@09:44:21.250 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:21.343 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:21.361 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 9.1
2016-12-13@09:44:21.361 [brltty] speech: say: e
2016-12-13@09:44:21.361 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:21.413 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:21.414 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:21.418 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:21.433 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 10.1
2016-12-13@09:44:21.433 [brltty] speech: say: r
2016-12-13@09:44:21.433 [brltty] speech: unqueuing speech request: say text
2016-12-13@09:44:21.433 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:21.464 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:21.464 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:21.464 [brltty] speech: sending speech request: say text
2016-12-13@09:44:21.464 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:21.598 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:21.614 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 11.1
2016-12-13@09:44:21.614 [brltty] speech: say: y
2016-12-13@09:44:21.614 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:21.649 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:21.649 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:21.699 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:21.699 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:21.699 [brltty] speech: sending speech request: say text
2016-12-13@09:44:21.699 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:21.738 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:21.753 [brltty] speech: autospeak: word appended: [0,0] 8.4
2016-12-13@09:44:21.753 [brltty] speech: say: very
2016-12-13@09:44:21.753 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:21.777 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:21.778 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:21.828 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:21.828 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:21.828 [brltty] speech: sending speech request: say text
2016-12-13@09:44:21.828 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:21.979 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:21.995 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 13.1
2016-12-13@09:44:21.995 [brltty] speech: say: m
2016-12-13@09:44:21.995 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:22.120 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:22.135 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 14.1
2016-12-13@09:44:22.135 [brltty] speech: say: o
2016-12-13@09:44:22.135 [brltty] speech: unqueuing speech request: say text
2016-12-13@09:44:22.135 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:22.184 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:22.184 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:22.234 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:22.235 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:22.235 [brltty] speech: sending speech request: say text
2016-12-13@09:44:22.235 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:22.255 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:22.270 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 15.1
2016-12-13@09:44:22.270 [brltty] speech: say: n
2016-12-13@09:44:22.270 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:22.391 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:22.406 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 16.1
2016-12-13@09:44:22.406 [brltty] speech: say: o
2016-12-13@09:44:22.406 [brltty] speech: unqueuing speech request: say text
2016-12-13@09:44:22.406 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:22.556 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:22.575 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 17.1
2016-12-13@09:44:22.575 [brltty] speech: say: t
2016-12-13@09:44:22.575 [brltty] speech: unqueuing speech request: say text
2016-12-13@09:44:22.575 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:22.612 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:22.612 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:22.663 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:22.663 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:22.663 [brltty] speech: sending speech request: say text
2016-12-13@09:44:22.663 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:22.762 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:22.762 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:22.812 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:22.812 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:22.944 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:22.959 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 18.1
2016-12-13@09:44:22.959 [brltty] speech: say: o
2016-12-13@09:44:22.959 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:22.959 [brltty] speech: sending speech request: say text
2016-12-13@09:44:22.960 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:22.976 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:22.976 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:23.026 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:23.027 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:23.126 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:23.126 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:23.128 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:23.149 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 19.1
2016-12-13@09:44:23.149 [brltty] speech: say: n
2016-12-13@09:44:23.149 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:23.150 [brltty] speech: sending speech request: say text
2016-12-13@09:44:23.150 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:23.200 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:23.200 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:23.249 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:23.269 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 20.1
2016-12-13@09:44:23.270 [brltty] speech: say: o
2016-12-13@09:44:23.270 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:23.270 [brltty] speech: sending speech request: say text
2016-12-13@09:44:23.270 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:23.340 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:23.340 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:23.379 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:23.390 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:23.390 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:23.394 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 21.1
2016-12-13@09:44:23.394 [brltty] speech: say: u
2016-12-13@09:44:23.394 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:23.394 [brltty] speech: sending speech request: say text
2016-12-13@09:44:23.394 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:23.490 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:23.490 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:23.540 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:23.540 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:23.574 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:23.589 [brltty] speech: autospeak: characters inserted before
cursor: [0,0] 22.1
2016-12-13@09:44:23.589 [brltty] speech: say: s
2016-12-13@09:44:23.589 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:23.589 [brltty] speech: sending speech request: say text
2016-12-13@09:44:23.589 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:23.639 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:23.639 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:23.690 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:23.690 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:23.810 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:23.811 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:24.116 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:24.131 [brltty] speech: autospeak: line selected: [0,1] 0.128
2016-12-13@09:44:24.831 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:24.845 [brltty] speech: autospeak: line selected: [0,0] 0.128
2016-12-13@09:44:24.845 [brltty] speech: say: This is very monotonous
2016-12-13@09:44:24.845 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:24.845 [brltty] speech: sending speech request: say text
2016-12-13@09:44:24.846 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:24.896 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:24.896 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:26.175 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:26.205 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:26.206 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:26.697 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:27.037 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:27.053 [brltty] speech: autospeak: line selected: [0,36] 0.128
2016-12-13@09:44:27.053 [brltty] speech: say: :
2016-12-13@09:44:27.053 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:27.053 [brltty] speech: sending speech request: say text
2016-12-13@09:44:27.053 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:27.104 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:27.104 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:27.105 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:27.105 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:27.584 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:27.600 [brltty] speech: autospeak: characters inserted before
cursor: [0,36] 1.1
2016-12-13@09:44:27.600 [brltty] speech: say: q
2016-12-13@09:44:27.600 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:27.600 [brltty] speech: sending speech request: say text
2016-12-13@09:44:27.600 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:27.650 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:27.650 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:27.808 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:27.808 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:28.145 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:28.160 [brltty] speech: autospeak: line selected: [0,0] 0.128
2016-12-13@09:44:28.160 [brltty] speech: say: This is very monotonous
2016-12-13@09:44:28.160 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:28.160 [brltty] speech: sending speech request: say text
2016-12-13@09:44:28.160 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:28.210 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:28.211 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:29.321 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:29.517 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:29.518 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:29.542 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:29.559 [brltty] speech: autospeak: line selected: [0,36] 0.128
2016-12-13@09:44:29.559 [brltty] speech: say: :
2016-12-13@09:44:29.559 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:29.559 [brltty] speech: sending speech request: say text
2016-12-13@09:44:29.559 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:29.610 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:29.610 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:29.611 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:29.611 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:29.830 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:29.845 [brltty] speech: autospeak: characters inserted before
cursor: [0,36] 1.1
2016-12-13@09:44:29.845 [brltty] speech: say: q
2016-12-13@09:44:29.845 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:29.845 [brltty] speech: sending speech request: say text
2016-12-13@09:44:29.845 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:29.896 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:29.896 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:30.014 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:30.051 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:30.052 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:30.214 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:30.231 [brltty] speech: autospeak: characters inserted before
cursor: [0,36] 2.1
2016-12-13@09:44:30.231 [brltty] speech: say: !
2016-12-13@09:44:30.231 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:30.231 [brltty] speech: sending speech request: say text
2016-12-13@09:44:30.231 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:30.331 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:30.332 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:30.714 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:30.728 [brltty] speech: autospeak: character selected: [0,36]
0.1
2016-12-13@09:44:30.729 [brltty] speech: say: :
2016-12-13@09:44:30.729 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:30.729 [brltty] speech: sending speech request: say text
2016-12-13@09:44:30.729 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:30.780 [brltty] speech: autospeak: characters replaced: [0,36]
0.23
2016-12-13@09:44:30.780 [brltty] speech: say: swannie@kleiner ~ :-) %
2016-12-13@09:44:30.780 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:30.906 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:30.906 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:31.006 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:31.007 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:31.007 [brltty] speech: sending speech request: say text
2016-12-13@09:44:31.007 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:31.183 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:31.184 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:31.234 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:31.234 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:31.662 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:31.677 [brltty] speech: autospeak: characters inserted before
cursor: [0,36] 24.1
2016-12-13@09:44:31.677 [brltty] speech: say: k
2016-12-13@09:44:31.677 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:31.677 [brltty] speech: sending speech request: say text
2016-12-13@09:44:31.677 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:32.016 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:32.016 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:32.057 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:32.067 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:32.067 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:32.073 [brltty] speech: autospeak: characters deleted before
cursor: [0,36] 24.1
2016-12-13@09:44:32.073 [brltty] speech: say: k
2016-12-13@09:44:32.073 [brltty] speech: enqueuing speech request: say text
2016-12-13@09:44:32.073 [brltty] speech: sending speech request: say text
2016-12-13@09:44:32.073 [speech-driver] speech: handling speech request: say
text
2016-12-13@09:44:32.203 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:32.251 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:32.251 [brltty] speech: handling speech message: speech
finished
2016-12-13@09:44:32.302 [speech-driver] speech: sending speech message: request
finished
2016-12-13@09:44:32.302 [brltty] speech: handling speech message: request
finished
2016-12-13@09:44:32.363 [brltty] command: 000000 (NOOP: nichts unternehmen)
2016-12-13@09:44:32.486 [speech-driver] speech: sending speech message: speech
finished
2016-12-13@09:44:32.486 [brltty] speech: handling speech message: speech
finished
