Am 05.12.2018 um 09:27 schrieb Christian T. Steigies <c...@debian.org>:
>> A proper test machine would be an A3000 or A4000 (or T variant),
>> equipped with a Zorro II expansion card that contains Zorro II RAM
>> (e.g. a combined SCSI/memory expansion card).
> I should still have a GVP Series-II SCSI controller with 8M RAM (my first
> expansion card, perhaps I can still find the huge 100MB disk I bought with
> it).  I do also have an A3000, but this machine has no expansion card, ie
> only the built 030 CPU, 1(?)MB RAM, no harddisk, no NIC, ... so no Z-II RAM?
> But if we would place this card in crest or kullervo, we'd have a suitable
> test machine?

About the NIC: just buy an X-Surf100. That’s the easy part. ;)

About ZIII RAM: I still should have a spare BRP available for that purpose of a 
porter box. But then again it would be a slow memory (12 MB/s vs. >60 MB/s), so 
the biggest problem is to get a 060 card, which are quite expensive on Ebay, 
but there are some cards on auction at the moment: 

- GVP G-Force 040 for A3000: 
https://www.ebay.de/itm/GVP-G-Force-3040-fur-Amiga-3000/163410730541
- Cyberstorm PPC/060: 
https://www.ebay.de/itm/AMIGA-Phase-5-CyberStorm-PPC-233MHz-mit-Rev-6-68060-und-128MB-RAM-TOP/202523892233

The GVP card might be cheaper, but it is only a 040 and I think you’ll need 
expensive, special GVP memory modules whereas the Cyberstorm already comes with 
128 MB PS/2 memory, but will rise in cost for that auction. 
Sometimes you can even buy ZIP-TO-DIMM adaptors on Ebay, but I’m not sure about 
that, because of the fragile nature of ZIP chip legs… 

About ZII memory… I still might have a ZII card with some memory on it, but 
memory with <5 MB/s bandwidth? Come on...!! ;)

About disk: there is the Budda IDE card for quite a few bugs: 
https://icomp.de/shop-icomp/en/shop/product/buddha-ide.html : 
> The Linux- and NetBSD drivers for older versions of the Buddha controller can 
> be used on this new version without change.



I still need to re-install Arrakis/Spice. @Adrian: do you have a fresh 
installation image for me or is that one from the meeting in Essen still good?
-- 
Ciao...          //        http://blog.windfluechter.net
      Ingo     \X/     XMPP: i...@jabber.windfluechter.net
        
gpg pubkey:  http://www.juergensmann.de/ij_public_key.asc



Reply via email to