On 02/10/2018 01:07 PM, Stefan Niestegge wrote: > Probably nothing wrong with it, but with the kernel from the netinstall > iso no IDE was detected at all. A module was needed to be loaded and > pata_falcon was tried at first, and was successful. After the installer > installed to /dev/sda3 it made no sense to modprobe falconide that would > create /dev/hda nodes.
Geert said that the m68k pata_* drivers will need some extra small changes to support automatic module loading. I did actually add such changes to the VIO drivers on SPARC myself because those drivers also didn't load automatically. If the changes necessary are the same, then it's a trivial problem to fix in the kernel. > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=36128d204b81c099b5779771127a5546eac549c9 > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5bde2c9be701c4583f0a9243bd46590ec401bfba >> The EtherNAT will remember the MAC address across reboots, but some hack >> to set a fixed address after module load might be in order. My EtherNAT >> is toast so I can't test that myself. > > Perhaps i can take a look at your EtherNAT if you attend to m68k meetup. > i revived a broken EtherNAT by simply reprogramming the FPGA. Michael is located at the other end of the globe. Not sure whether he will be able to make it :-). Would be very cool though. >> The console keyboard map is for american layout: @ is on shift-2, ~ is >> on shift-~, | is on shift-#, [ is on ü, ] is on + (curly brackets on >> shift with same keys) with my german layout keyboard. No idea why I used >> the american layout, I'm sure I had taken down the german raw keycodes >> at some stage when rewriting the keyboard driver. > > i choosed german keyboard at D-I setup and shift-2 is ", shift-~ is ° > shift-# is ' ... Can you try switching to a US keyboard layout? Run "dpkg-reconfigure console-setup" as root to do that. >> xserver needs support for the Atari pixel format (interleaved planes). >> Shouldn't be too hard to do, but Xorg code probably isn't for the faint >> of heart (I've certainly had enough to last me a lifetime). > > so, remove Xorg and install old XFree86? XFree86 is long dead and probably won't even work with modern kernels, so I don't think this is any sensible option. You will also most likely not be able to run any modern X applications with XFree86. > hmm. my supervidel supports 8-bit chunky as well as 16 bit (compatible > to the Falcon 320x200 "truecolor". we could also give Xorg what it > needs to be happy. Did you configure the driver to be used as "fbedv" in /etc/X11/xorg.conf? Adrian -- .''`. John Paul Adrian Glaubitz : :' : Debian Developer - glaub...@debian.org `. `' Freie Universitaet Berlin - glaub...@physik.fu-berlin.de `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
