Op 2014-05-04 om 13:38 schreef David Gosselin: > From: Sad Clouds > Sent: Sunday, May 04, 2014 3:57 AM > > On Sun, 4 May 2014 08:25:16 +0100 Sad Clouds wrote: > > >On Sat, 03 May 2014 17:20:33 -0600 Hayden Kroepfl wrote: > > >> On 03/05/14 03:39 PM, Sad Clouds wrote: > > >> > Hello, I'm new to Debian and trying it out on Ultra10 which has > > >> > Creator3D framebuffer. > > >> > > > >> > I installed Debian stable and seem to be having some issues with > > >> > X11 or display manager. The system boots OK and I can see boot > > >> > messages, but when it goes to start display manager the screen > > >> > goes black and nothing happens. No windows, no mouse cursor, > > >> > nothing. > > >> > > > >> > Any ideas? > > >> > > > >> > > > >> > > >> Might as well ask about the obvious right away, do you have your > > >> monitor hooked up to the onboard video in the bottom left corner > > >> (facing the back), or to the 13W3 video connector on the Creator3D? > > >> What could be happening is X11 picked the wrong card by default and > > >> is only showing it on the opposite connector. If you have a second > > >> monitor try hooking one up to the 13W3 and one to the VGA connector. > > >> > > >> Hayden K. > > > > > >Hello, that was the first thing I tried however there is no VGA signal > > >on machfb. I managed to get IP address assigned to this machine from > > >DHCP server, logged in via ssh and looked at the logs. Looks like X > > >server has problems configuring framebuffer device. > > > > > >So I generated xorg.conf manually with 'X -configure' and it thinks I > > >have 3 cards: > > > > > > Identifier "Card0" > > > Driver "mach64" > > > BusID "PCI:1:2:0" > > > > > > Identifier "Card1" > > > Driver "fbdev" > > > BusID "PCI:1:2:0" > > > > > > Identifier "Card2" > > > Driver "vesa" > > > BusID "PCI:1:2:0" > > > > > > > > >This looks wrong to me, one of them should be using sunffb driver. And > > >why all three drivers refer to the same BusID? > > > > > >I tried copying this file to /etc/X11/xorg.conf and leaving only > > > > > > Identifier "Card1" > > > Driver "sunffb" > > > BusID "PCI:1:2:0" > > > > > >But still can't get X11 running > > > > > >Any ideas? > > > > OK changed that to > > > > BusID "SBUS:/SUNW,ffb@1e,0" > > > > and X11 works now. > > > > Hi, > I was curious as to what prompted you to try "SBUS:/SUNW,ffb@1e,0" > for the BusID value?
Me too > Thanks, > Dave And the archive mostlike also. Please respect the discussion sequence and reply below the text. Groeten Geert Stappers -- Leven en laten leven
signature.asc
Description: Digital signature
