atari_defconfig would be a good one to try, followed by multi_defconfig,
or (for the brave) multi_defconfig modified to have all drivers
built-in.
multi_defconfig throws a fit:
------------[ cut here ]------------
WARNING: at kernel/softirq.c:141 local_bh_enable+0x72/0x80()
Modules linked in:
Call Trace: [<0002f430>] warn_on_slowpath+0x44/0x60
[<0003316e>] local_bh_enable+0x72/0x80
[<00041ccc>] sysctl_repair_table+0x0/0x2c
[<00041efc>] sysctl_check_bin_path+0x12/0x94
[<00041eea>] sysctl_check_bin_path+0x0/0x94
[<00041ccc>] sysctl_repair_table+0x0/0x2c
[<00042046>] sysctl_check_table+0xc8/0x37e
[<00041eea>] sysctl_check_bin_path+0x0/0x94
[<00041ccc>] sysctl_repair_table+0x0/0x2c
[<00042074>] sysctl_check_table+0xf6/0x37e
[<00041eea>] sysctl_check_bin_path+0x0/0x94
[<00041ccc>] sysctl_repair_table+0x0/0x2c
[<00042074>] sysctl_check_table+0xf6/0x37e
[<00056660>] kmemdup+0x28/0x36
[<00128d6c>] random32+0xa/0xe
[<0003316e>] local_bh_enable+0x72/0x80
[<001c8ac8>] neigh_parms_alloc+0xaa/0xcc
[<001f6b54>] inetdev_init+0x60/0xd8
[<001f7ef2>] inetdev_event+0x114/0x170
[<001c22e4>] register_netdevice_notifier+0x5e/0x14a
[<001f93f0>] inet_register_protosw+0x0/0xb4
[<00334e3c>] devinet_init+0x2a/0x72
[<001f79ce>] inet_gifconf+0x0/0xb2
[<003344c8>] ip_rt_init+0xec/0x1e4
[<0033470a>] ip_init+0x6/0xe
[<003350a2>] inet_init+0xe6/0x1aa
[<00334fbc>] inet_init+0x0/0x1aa
[<0031985a>] do_one_initcall+0x0/0x16a
[<00319876>] do_one_initcall+0x1c/0x16a
[<000a0f4c>] sysfs_create_file+0x3c/0x42
[<0016350a>] sysdev_class_create_file+0x12/0x16
[<00165f22>] cpu_states_init+0x20/0x38
[<003199de>] do_initcalls+0x1a/0x30
[<00334fbc>] inet_init+0x0/0x1aa
[<000027e2>] kernel_thread+0x0/0x50
[<00319a0e>] do_basic_setup+0x1a/0x1c
[<00319a42>] kernel_init+0x20/0x5e
[<0000281e>] kernel_thread+0x3c/0x50
---[ end trace 429b268a213317ba ]---
(on ARAnyM, that is). There was a warning about initcall net_ns_init
returning with interrupts disabled that didn't show up in the atari only
case.
Real hardware tests still pending ...
Michael
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
