On Wed, May 23, 2007 at 04:40:48PM -0700, Brian Morris wrote: > On 5/23/07, L Moore <[EMAIL PROTECTED]> wrote: > >On Mon, May 21, 2007 at 10:13:19PM -0700, Brian Morris wrote: > > > > > > >Dillo is X-dependent? What version of gcc is needed? > > I used gcc4.1 to build Dillo against xorg libraries. but if there is some > trouble updating the debian package of it then you could try gcc3.3 with > xorg, transitionally. Ok, that's about third in the stack of jobs I'm told that I have to get sshd going to be able to login from the other computer hung on the hub - a G4 running Macos9 - before all else.
> >> > >> > >> How about your X ? did you get going ? did you see my > >> xconfig i posted that works (mostly). I am updating > >> now to that thread and more later. > >> > >No luck with X so far. Removing xorg and re-installed xfree86 > >didn't help. > >X and fbi hang the system. Still working on it. > > > stick with Xorg, is my advice. it goes along with the upgrade. but > then you do what you can, when you can. I'm re-installing xorg from the etch-m68k now. > what is the name of your framebuffer device in your machine, you have Name of my framebuffer? beyond /dev/fb0 ?? > a q610 right ? I only have tried with q630. I am working to clean up some > old test disks from powermacs then I can copy it over to try on q605. > > when I have work with the keyboard issue a bit more I will post my lastest > xorg.conf and also my setup process with fbset: you can test fbset with fbi. > but if you mess up fbset you have to rlogin from another computer or else > "the three finger salute" and going through rebooting w/ fsck is a pain. > > if you have any old mac doesn't have to be running linux, you can rlogin > with macssh terminal program. I have an old powerbook68k that sit next to > my quadra for that and also provides some other things to look at while > keeping one eye on what the quadra is doing. otherwise I would be losing > my mind sitting there staring at it, as it does need sort of some > babysitting. > I am doing my homework while it goes. > > got a free powermac8500 this week with need minor repair. also has to > use framebuffer. it was good practice to compare with the quadra. it is > nice but it still has some other hardware needs. i think I could not do > either > architecture with out having the other to go back and forth. now I > learn somethings I can try back on the quadra. > Keep us posted? Thanks. -- Location: 43 58 8 N by 80 58 45 W Growing zone: lowest 48-hour temperature -25C Built: 1835 Renovations: 1910, 1952, 2006. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
