Le lundi 20 février 2006 à 22:03 -0500, Peter Krummrich a écrit : > On 19.02.2006, Geert Uytterhoeven wrote: > > > On Sat, 18 Feb 2006, Peter Krummrich wrote: > >> The kernel boot options video=clgen or video=cirrusfb did not activate > >> the PicassoII card. Typing modprobe cirrusfb.o blindly did not help > >> either (my monitor does not sync to amifb standard mode - what would be > >> the option to switch amifb to vga mode 640x480 with 60 Hz?). > > > > video=vga (640x480, 60 Hz) > > video=vga70 (640x400, 70 Hz) > > > > But this works on ECS or AGA only, i.e. not on your A2000 (unless you > > upgraded to ECS). > > > > I did upgrade to ECS. But I also have a flickerfixer in the box. As it > seems, this device keeps me from using these modes. Sorry that I did not > think about it earlier. > > But my preferred option would be to activate my Picasso II card anyway. Do > you happen to know, which part of the kernel source code interprets kernel > arguments and calls/activates the appropriate kernel module? There seems to > be some translation involved. The option for the clgen driver is > video=clgen. But the module name is clgenfb. So there is some translation > between the video= option and the module name. Maybe the code responsible > for this translation is not aware of the cirrusfb option/module yet? Just > an idea... >
I use also an A2000 with a flicker-fixer and I did not notice a problem apart of a cable one ! at least before 2.6.14.6. I will test 2.6.15 as soon as I have enough time. Regards JP Pozzi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
