On 10.02.2006, Christian Steigies wrote: > Hi, > I am uploading linux-2.6 (2.6.15-6) for m68k, the linux-images are already > available on my linux-image page > > http://people.debian.org/~cts/debian-m68k/linux-image/ > > With these images, several problems should be fixed, everybody please > test: - picasso2 flickering pixels
I gave it a try, but it was only partially successful. Booting went fine, but the Kernel used the afb framebuffer. Due to the scan ranges of my monitor, I did not see anything on the screen. Keyboard seems to work. I managed to log in (blindly...) and save a log from dmesg in a file. Loading the cirrusfb module using modprobe did not result in a display on the screen. I added cirrusfb to my modules file and rebooted - again nothing on the screen. Logging into the box from the network did not work either (does work with 2.4.27 kernel). So my testing capabilities are rather limited. All I can offer are two output files from dmesg attached to this message (first one without cirrusfb in modules, second one with). How can I concince the kernel to use cirrusfb instead of afb? Is there an option for amiboot like video=clgen for the 2.4.27 kernel? >- IDE buddha (and gayle, but that > probably worked in -4 already) boot problem - mac SCSI fix > - amiga keymaps should work again > > I hope I did not forget anything, but the rumor is, there will another > upload soon. > > Christian > > Best Regards, Peter
Linux version 2.6.15-1-amiga (Debian 2.6.15-6) ([EMAIL PROTECTED]) (gcc version 3.3.6) #1 Fri Feb 10 20:43:58 CET 2006 Enabling workaround for errata I14 Amiga hardware found: [A2000] VIDEO BLITTER AUDIO FLOPPY KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA DENISE_HR AGNUS_HR_PAL ZORRO On node 0 totalpages: 16256 DMA zone: 16256 pages, LIFO batch:3 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 Built 1 zonelists Kernel command line: root=/dev/sdb3 video=clgen:monitorcap:56;75;31;61 PID hash table entries: 256 (order: 8, 4096 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 61732k/65024k available (1876k kernel code, 1236k data, 120k init) Calibrating delay loop... 99.53 BogoMIPS (lpj=497664) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized Zorro: Probing AutoConfig expansion devices: 5 devices audit: initializing netlink socket (disabled) audit(1137066293.350:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ami_decode_var: double mode only possible with aga ami_decode_var: double mode only possible with aga Console: switching to colour frame buffer device 80x32 fb0: Amiga ECS frame buffer device, using 640K of video memory Amiga-builtin serial driver version 4.30 ttyS0 is the amiga builtin serial port RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: X-Surf IDE interface ide1: X-Surf IDE interface Probing IDE interface ide0... Probing IDE interface ide1... SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast) esp0: FAST chip is Emulex FAS236 (family=2, version=3) ESP: Total of 1 ESP hosts found, 1 actually in use. scsi0 : Blizzard2060 SCSI Vendor: IBM Model: DCAS-32160 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: DCAS-34330 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB) SCSI device sda: drive cache: write back SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB) SCSI device sda: drive cache: write back sda: RDSK (512) sda1 (DOS^C)(res 2 spb 1) sda2 (SWP^@)(res 2 spb 1) sda3 (LNX^@)(res 2 spb 1) sd 0:0:0:0: Attached scsi disk sda esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sdb: 8467200 512-byte hdwr sectors (4335 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 8467200 512-byte hdwr sectors (4335 MB) SCSI device sdb: drive cache: write back sdb: RDSK (512) sdb1 (DOS^C)(res 2 spb 1) sdb2 (LNX^@)(res 2 spb 1) sdb3 (LNX^@)(res 2 spb 1) sdb4 (SWP^@)(res 2 spb 1) sdb5 (LNX^@)(res 2 spb 1) sd 0:0:1:0: Attached scsi disk sdb mice: PS/2 mouse device common for all mice input: Amiga Keyboard as /class/input/input0 input: Amiga mouse as /class/input/input1 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Adding 125432k swap on /dev/sdb4. Priority:-1 extents:1 across:125432k EXT3 FS on sdb3, internal journal eth0: X-Surf at 0x00ed0000, Ethernet Address 52:54:40:28:b2:0f
Linux version 2.6.15-1-amiga (Debian 2.6.15-6) ([EMAIL PROTECTED]) (gcc version 3.3.6) #1 Fri Feb 10 20:43:58 CET 2006 Enabling workaround for errata I14 Amiga hardware found: [A2000] VIDEO BLITTER AUDIO FLOPPY KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA DENISE_HR AGNUS_HR_PAL ZORRO On node 0 totalpages: 16256 DMA zone: 16256 pages, LIFO batch:3 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 Built 1 zonelists Kernel command line: root=/dev/sdb3 video=cirrus PID hash table entries: 256 (order: 8, 4096 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 61732k/65024k available (1876k kernel code, 1236k data, 120k init) Calibrating delay loop... 99.53 BogoMIPS (lpj=497664) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized Zorro: Probing AutoConfig expansion devices: 5 devices audit: initializing netlink socket (disabled) audit(1134389410.350:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ami_decode_var: double mode only possible with aga ami_decode_var: double mode only possible with aga Console: switching to colour frame buffer device 80x32 fb0: Amiga ECS frame buffer device, using 640K of video memory Amiga-builtin serial driver version 4.30 ttyS0 is the amiga builtin serial port RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: X-Surf IDE interface ide1: X-Surf IDE interface Probing IDE interface ide0... Probing IDE interface ide1... SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast) esp0: FAST chip is Emulex FAS236 (family=2, version=3) ESP: Total of 1 ESP hosts found, 1 actually in use. scsi0 : Blizzard2060 SCSI Vendor: IBM Model: DCAS-32160 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: DCAS-34330 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB) SCSI device sda: drive cache: write back SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB) SCSI device sda: drive cache: write back sda: RDSK (512) sda1 (DOS^C)(res 2 spb 1) sda2 (SWP^@)(res 2 spb 1) sda3 (LNX^@)(res 2 spb 1) sd 0:0:0:0: Attached scsi disk sda esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sdb: 8467200 512-byte hdwr sectors (4335 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 8467200 512-byte hdwr sectors (4335 MB) SCSI device sdb: drive cache: write back sdb: RDSK (512) sdb1 (DOS^C)(res 2 spb 1) sdb2 (LNX^@)(res 2 spb 1) sdb3 (LNX^@)(res 2 spb 1) sdb4 (SWP^@)(res 2 spb 1) sdb5 (LNX^@)(res 2 spb 1) sd 0:0:1:0: Attached scsi disk sdb mice: PS/2 mouse device common for all mice input: Amiga Keyboard as /class/input/input0 input: Amiga mouse as /class/input/input1 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Adding 125432k swap on /dev/sdb4. Priority:-1 extents:1 across:125432k EXT3 FS on sdb3, internal journal cirrusfb: CL Picasso board detected; RAM (2 MB) at $200000, REG at $ec0000 Cirrus Logic chipset on Zorro bus cirrusfb: Driver for Cirrus Logic based graphic boards, v2.0-pre2 eth0: X-Surf at 0x00ed0000, Ethernet Address 52:54:40:28:b2:0f
