Hi all, Thanks for the replies! I had a go with spack instead and that seemed to do the trick.
Best, Greg On Wednesday, 8 January 2025 at 18:40:42 UTC Mahdi wrote: > Hi Greg, > > What Wolfgang suggested is definitely the best way to figure out and fix > the issue. I just wanted to add a few suggestions that might help or at > least give you a starting point. These aren’t guaranteed fixes, but they > might address some common errors you might run into while troubleshooting. > As Wolfgang said, you may need to dig a bit deeper depending on what you > find. > > > > 1. Check if ExodusII is properly installed and part of Trilinos. The > message that you posted says it’s installed, but it’s worth > double-checking. If it’s missing, you’ll need to include it during the > Trilinos build. Use the option -D Trilinos_ENABLE_SEACAS=ON -D > Trilinos_ENABLE_SEACASExodus=ON along with other options and your Trilinos > source path when running CMake. > > 2. Look in your Trilinos installation directory. Check if these files > exist: libexodus.a or libexodus.so and libnetcdf.a or libnetcdf.so. > > 3. Make sure NetCDF and HDF5 are installed and visible to Trilinos. In > my experience, this is usually where things go wrong. If Trilinos can’t > find these dependencies, you might need to explicitly provide their paths > during the build. Use something like -D TPL_ENABLE_Netcdf=ON -D > TPL_Netcdf_INCLUDE_DIRS=/path/to/netcdf/include -D > TPL_Netcdf_LIBRARIES=/path/to/netcdf/lib/libnetcdf.so. > > 4. Rebuild Trilinos if needed. If any of the above checks fail, you’ll > probably need to rebuild Trilinos after fixing the missing pieces. During > the Trilinos build, look for these messages to confirm everything is set > up > correctly: SEACAS enabled: YES and Exodus enabled: YES. > > 5. Clear your build directory before rebuilding. I’ve had issues in > the past where cached settings caused problems, even after fixing things. > Clearing the build directory and starting fresh usually helps. > > 6. Enable verbose output for more details. If the problem persists, > you can turn on verbose output to get more information during the build. > Add the option -DCMAKE_VERBOSE_MAKEFILE=ON to your CMake configuration. > This will show you exactly what’s happening and might help pinpoint where > the issue is. > > > You can find more details on TRILINOS installation here: > https://www.dealii.org/current/external-libs/trilinos.html > > If you still run into problems, feel free to share the specific errors or > logs, and we can take another look together. Hope this helps! > > Best, > Mahdi > > > On Wed, Jan 8, 2025 at 10:10 AM Wolfgang Bangerth <bang...@colostate.edu> > wrote: > >> On 1/8/25 03:49, Gregory Christian wrote: >> > Error on the dealii side: >> > -- Performing Test TRILINOS_SEACAS_IS_FUNCTIONAL >> > -- Performing Test TRILINOS_SEACAS_IS_FUNCTIONAL - Failed >> > -- SEACAS was found but doesn't seem to include ExodusII. Disabling >> SEACAS >> > support. >> >> Greg: >> I have nothing of substance to offer here other than perhaps trying to >> find >> out why the deal.II check fails (i.e., what functionality is missing) and >> then >> working backward trying to find out *why* it is missing from your >> Trilinos >> installation. >> >> Best >> W. >> >> -- >> ------------------------------------------------------------------------ >> Wolfgang Bangerth email: bang...@colostate.edu >> www: http://www.math.colostate.edu/~bangerth/ >> >> >> -- >> The deal.II project is located at http://www.dealii.org/ >> For mailing list/forum options, see >> https://groups.google.com/d/forum/dealii?hl=en >> --- >> You received this message because you are subscribed to the Google Groups >> "deal.II User Group" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to dealii+un...@googlegroups.com. >> To view this discussion visit >> https://groups.google.com/d/msgid/dealii/4e101e8e-cbc6-49ac-8bc2-e1738c41edcd%40colostate.edu >> . >> > -- The deal.II project is located at http://www.dealii.org/ For mailing list/forum options, see https://groups.google.com/d/forum/dealii?hl=en --- You received this message because you are subscribed to the Google Groups "deal.II User Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to dealii+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/dealii/1e2b88fe-a2a1-4f57-9f07-c23bd5ec2049n%40googlegroups.com.
