Dear Wolfgang and Richard, thanks a lot for your quick replies!
Have you taken a look at the deal.II Code Gallery? > https://dealii.org/developer/doxygen/deal.II/CodeGallery.html > There are a couple more large-deformation codes. > > Looked once, but obviously not close enough. There are several more appropriate codes I haven't noticed. > There is also this article from Thomas Wick about a deal.II-based code for > FSI: > https://media.archnumsoft.org/10305/ > I believe that the code that goes with the article is freely available as > well. > Very nice! You might simplify one of the codes from the code gallery and plug in the > element integration routine from the last code to get to 'geometrically > nonlinear elasticity'. > I have done some similar things, thus have a bit of code in that > direction. If you are interested in working together, just mail me. > > Good luck & Kind regards, > Richard > I think this is the way to go here. I would like to investigate this idea first of all and get familiar with the codes. Thanks for your kind offer, I will let you know, when it is needed. Best regards, David -- The deal.II project is located at http://www.dealii.org/ For mailing list/forum options, see https://groups.google.com/d/forum/dealii?hl=en --- You received this message because you are subscribed to the Google Groups "deal.II User Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to dealii+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/dealii/2d534a48-fc2e-4091-98b9-1b53271a88d8%40googlegroups.com.
