No luck with rocm either, but the message changes, see below....
I am not sure if the hsa module is correct... Why does it refer to /data/jenkins_workspace/ ???
This is not on my computer.....
Does anyone have darktable with openCL running on a Dell Precision 7700 series ??? If so which graphics card?
Thanks Jozef Dassen
rocminfo:
ROCk module is loaded
dassen is member of video group
hsa api call failure at: /data/jenkins_workspace/compute-rocm-rel-2.9/rocminfo/rocminfo.cc:1102
Call returned HSA_STATUS_ERROR_OUT_OF_RESOURCES: The runtime failed to allocate the necessary resources. This error may also occur when the core runtime
library needs to spawn threads or create internal OS-specific events.
ROCk module is loaded
dassen is member of video group
hsa api call failure at: /data/jenkins_workspace/compute-rocm-rel-2.9/rocminfo/rocminfo.cc:1102
Call returned HSA_STATUS_ERROR_OUT_OF_RESOURCES: The runtime failed to allocate the necessary resources. This error may also occur when the core runtime
library needs to spawn threads or create internal OS-specific events.
clinfo:
Number of platforms: 1
Platform Profile: FULL_PROFILE
Platform Version: OpenCL 2.1 AMD-APP (2982.0)
Platform Name: AMD Accelerated Parallel Processing
Platform Vendor: Advanced Micro Devices, Inc.
Platform Extensions: cl_khr_icd cl_amd_event_callback cl_amd_offline_devices
Number of platforms: 1
Platform Profile: FULL_PROFILE
Platform Version: OpenCL 2.1 AMD-APP (2982.0)
Platform Name: AMD Accelerated Parallel Processing
Platform Vendor: Advanced Micro Devices, Inc.
Platform Extensions: cl_khr_icd cl_amd_event_callback cl_amd_offline_devices
Platform Name: AMD Accelerated Parallel Processing
ERROR: clGetDeviceIDs(-1)
darktable-cltest:
0.038262 [opencl_init] opencl related configuration options:
0.038279 [opencl_init]
0.038281 [opencl_init] opencl: 1
0.038283 [opencl_init] opencl_library: ''
0.038285 [opencl_init] opencl_memory_requirement: 768
0.038287 [opencl_init] opencl_memory_headroom: 300
0.038289 [opencl_init] opencl_device_priority: '*/!0,*/*/*'
0.038291 [opencl_init] opencl_mandatory_timeout: 200
0.038292 [opencl_init] opencl_size_roundup: 16
0.038294 [opencl_init] opencl_async_pixelpipe: 0
0.038295 [opencl_init] opencl_synch_cache: active module
0.038297 [opencl_init] opencl_number_event_handles: 25
0.038299 [opencl_init] opencl_micro_nap: 1000
0.038300 [opencl_init] opencl_use_pinned_memory: 0
0.038302 [opencl_init] opencl_use_cpu_devices: 0
0.038303 [opencl_init] opencl_avoid_atomics: 0
0.038305 [opencl_init]
0.038443 [opencl_init] found opencl runtime library 'libOpenCL'
0.038460 [opencl_init] opencl library 'libOpenCL' found on your system and loaded
0.052124 [opencl_init] found 1 platform
0.052130 [opencl_init] could not get device id size: -1
0.052132 [opencl_init] found 0 device
0.052133 [opencl_init] FINALLY: opencl is NOT AVAILABLE on this system.
0.052135 [opencl_init] initial status of opencl enabled flag is OFF.
0.038279 [opencl_init]
0.038281 [opencl_init] opencl: 1
0.038283 [opencl_init] opencl_library: ''
0.038285 [opencl_init] opencl_memory_requirement: 768
0.038287 [opencl_init] opencl_memory_headroom: 300
0.038289 [opencl_init] opencl_device_priority: '*/!0,*/*/*'
0.038291 [opencl_init] opencl_mandatory_timeout: 200
0.038292 [opencl_init] opencl_size_roundup: 16
0.038294 [opencl_init] opencl_async_pixelpipe: 0
0.038295 [opencl_init] opencl_synch_cache: active module
0.038297 [opencl_init] opencl_number_event_handles: 25
0.038299 [opencl_init] opencl_micro_nap: 1000
0.038300 [opencl_init] opencl_use_pinned_memory: 0
0.038302 [opencl_init] opencl_use_cpu_devices: 0
0.038303 [opencl_init] opencl_avoid_atomics: 0
0.038305 [opencl_init]
0.038443 [opencl_init] found opencl runtime library 'libOpenCL'
0.038460 [opencl_init] opencl library 'libOpenCL' found on your system and loaded
0.052124 [opencl_init] found 1 platform
0.052130 [opencl_init] could not get device id size: -1
0.052132 [opencl_init] found 0 device
0.052133 [opencl_init] FINALLY: opencl is NOT AVAILABLE on this system.
0.052135 [opencl_init] initial status of opencl enabled flag is OFF.
Sent: Tuesday, November 19, 2019 at 7:26 PM
From: "Andreas Schneider" <a...@cryptomilk.org>
To: darktable-dev@lists.darktable.org
Cc: "Jozef Dassen" <jmhdas...@gmx.com>
Subject: Re: [darktable-dev] darktable 3.0 rc1 openCL
From: "Andreas Schneider" <a...@cryptomilk.org>
To: darktable-dev@lists.darktable.org
Cc: "Jozef Dassen" <jmhdas...@gmx.com>
Subject: Re: [darktable-dev] darktable 3.0 rc1 openCL
On Tuesday, 19 November 2019 12:27:50 CET Jozef Dassen wrote:
> After a lot of struggle I managed to install amdgpu drivers on my Ubuntu
> 18.04. It did not work with kernel 5.0 but going back to kernel 4.15 worked
> fine. Flawless installation of amdgpu 18.40.
> Then I ran darktable-cltest (darktable 3.0 rc1) and got the following
> result:
> 0.037740 [opencl_init] opencl related configuration options:
> 0.037752 [opencl_init]
> 0.037755 [opencl_init] opencl: 1
> 0.037757 [opencl_init] opencl_library: ''
> 0.037759 [opencl_init] opencl_memory_requirement: 500
> 0.037761 [opencl_init] opencl_memory_headroom: 0
> 0.037763 [opencl_init] opencl_device_priority: '*/!0,*/*/*'
> 0.037784 [opencl_init] opencl_mandatory_timeout: 200
> 0.037786 [opencl_init] opencl_size_roundup: 16
> 0.037788 [opencl_init] opencl_async_pixelpipe: 0
> 0.037790 [opencl_init] opencl_synch_cache: active module
> 0.037794 [opencl_init] opencl_number_event_handles: 25
> 0.037797 [opencl_init] opencl_micro_nap: 1000
> 0.037800 [opencl_init] opencl_use_pinned_memory: 0
> 0.037802 [opencl_init] opencl_use_cpu_devices: 0
> 0.037804 [opencl_init] opencl_avoid_atomics: 1
> 0.037806 [opencl_init]
> 0.037962 [opencl_init] found opencl runtime library 'libOpenCL'
> 0.037980 [opencl_init] opencl library 'libOpenCL' found on your system and
> loaded 0.170870 [opencl_init] found 1 platform
> 0.170885 [opencl_init] found 1 device
> 0.170923 [opencl_init] device 0 `Capeverde' supports image sizes of 16384 x
> 16384 0.170927 [opencl_init] device 0 `Capeverde' allows GPU memory
> allocations of up to 1053MB [opencl_init] device 0: Capeverde
> GLOBAL_MEM_SIZE: 1472MB
> MAX_WORK_GROUP_SIZE: 256
> MAX_WORK_ITEM_DIMENSIONS: 3
> MAX_WORK_ITEM_SIZES: [ 1024 1024 1024 ]
> DRIVER_VERSION: 2686.5
> DEVICE_VERSION: OpenCL 1.2 AMD-APP (2686.5)
> 0.171329 [opencl_init] could not create command queue for device 0: -6
> 0.171373 [opencl_init] FINALLY: opencl is NOT AVAILABLE on this system.
> 0.171376 [opencl_init] initial status of opencl enabled flag is OFF.
>
>
> my display is:
> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
> Venus XTX [Radeon HD 8890M / R9 M275X/M375X] (rev 83) (prog-if 00 [VGA
> controller]) Subsystem: Dell Venus XTX [Radeon HD 8890M / R9 M275X/M375X]
> Flags: bus master, fast devsel, latency 0, IRQ 128
> Memory at b0000000 (64-bit, prefetchable) [size=256M]
> Memory at de300000 (64-bit, non-prefetchable) [size=256K]
> I/O ports at e000 [size=256]
> Expansion ROM at 000c0000 [disabled] [size=128K]
> Capabilities: [48] Vendor Specific Information: Len=08 <?>
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Legacy Endpoint, MSI 00
> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010
> <?> Capabilities: [150] Advanced Error Reporting
> Capabilities: [200] #15
> Capabilities: [270] #19
> Kernel driver in use: amdgpu
> Kernel modules: radeon, amdgpu
>
> I have fresh Ubuntu 18.04-1 installation on a sytem with 64Gbyte RAM. Only
> Firefox is running. So no resource problems. I have deferred all other
> installations until I can get darktable with openCL running. This is a
> sine-qua-non for me.
> So no luck... Again........
>
> Any ideas what could be the problem ??
>
> darktablerc parameters:
> opencl=true
> opencl_async_pixelpipe=false
> opencl_avoid_atomics=true
> opencl_checksum=
> opencl_device_priority=*/!0,*/*/*
> opencl_disable_drivers_blacklist=false
> opencl_library=
> opencl_mandatory_timeout=200
> opencl_memory_headroom=0
> opencl_memory_requirement=500
> opencl_micro_nap=1000
> opencl_number_event_handles=25
> opencl_scheduling_profile=default
> opencl_size_roundup=16
> opencl_synch_cache=active module
> opencl_use_cpu_devices=false
> opencl_use_pinned_memory=false
I would suggest to just use the open source driver provided by the kernel and
install ROCm for OpenCL.
http://repo.radeon.com/rocm/apt/
Works just fine on Fedora and openSUSE. I can't help you with the proprietary
driver.
Andreas
--
Andreas Schneider a...@cryptomilk.org
GPG-ID: 8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D
___________________________________________________________________________
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
> After a lot of struggle I managed to install amdgpu drivers on my Ubuntu
> 18.04. It did not work with kernel 5.0 but going back to kernel 4.15 worked
> fine. Flawless installation of amdgpu 18.40.
> Then I ran darktable-cltest (darktable 3.0 rc1) and got the following
> result:
> 0.037740 [opencl_init] opencl related configuration options:
> 0.037752 [opencl_init]
> 0.037755 [opencl_init] opencl: 1
> 0.037757 [opencl_init] opencl_library: ''
> 0.037759 [opencl_init] opencl_memory_requirement: 500
> 0.037761 [opencl_init] opencl_memory_headroom: 0
> 0.037763 [opencl_init] opencl_device_priority: '*/!0,*/*/*'
> 0.037784 [opencl_init] opencl_mandatory_timeout: 200
> 0.037786 [opencl_init] opencl_size_roundup: 16
> 0.037788 [opencl_init] opencl_async_pixelpipe: 0
> 0.037790 [opencl_init] opencl_synch_cache: active module
> 0.037794 [opencl_init] opencl_number_event_handles: 25
> 0.037797 [opencl_init] opencl_micro_nap: 1000
> 0.037800 [opencl_init] opencl_use_pinned_memory: 0
> 0.037802 [opencl_init] opencl_use_cpu_devices: 0
> 0.037804 [opencl_init] opencl_avoid_atomics: 1
> 0.037806 [opencl_init]
> 0.037962 [opencl_init] found opencl runtime library 'libOpenCL'
> 0.037980 [opencl_init] opencl library 'libOpenCL' found on your system and
> loaded 0.170870 [opencl_init] found 1 platform
> 0.170885 [opencl_init] found 1 device
> 0.170923 [opencl_init] device 0 `Capeverde' supports image sizes of 16384 x
> 16384 0.170927 [opencl_init] device 0 `Capeverde' allows GPU memory
> allocations of up to 1053MB [opencl_init] device 0: Capeverde
> GLOBAL_MEM_SIZE: 1472MB
> MAX_WORK_GROUP_SIZE: 256
> MAX_WORK_ITEM_DIMENSIONS: 3
> MAX_WORK_ITEM_SIZES: [ 1024 1024 1024 ]
> DRIVER_VERSION: 2686.5
> DEVICE_VERSION: OpenCL 1.2 AMD-APP (2686.5)
> 0.171329 [opencl_init] could not create command queue for device 0: -6
> 0.171373 [opencl_init] FINALLY: opencl is NOT AVAILABLE on this system.
> 0.171376 [opencl_init] initial status of opencl enabled flag is OFF.
>
>
> my display is:
> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
> Venus XTX [Radeon HD 8890M / R9 M275X/M375X] (rev 83) (prog-if 00 [VGA
> controller]) Subsystem: Dell Venus XTX [Radeon HD 8890M / R9 M275X/M375X]
> Flags: bus master, fast devsel, latency 0, IRQ 128
> Memory at b0000000 (64-bit, prefetchable) [size=256M]
> Memory at de300000 (64-bit, non-prefetchable) [size=256K]
> I/O ports at e000 [size=256]
> Expansion ROM at 000c0000 [disabled] [size=128K]
> Capabilities: [48] Vendor Specific Information: Len=08 <?>
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Legacy Endpoint, MSI 00
> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010
> <?> Capabilities: [150] Advanced Error Reporting
> Capabilities: [200] #15
> Capabilities: [270] #19
> Kernel driver in use: amdgpu
> Kernel modules: radeon, amdgpu
>
> I have fresh Ubuntu 18.04-1 installation on a sytem with 64Gbyte RAM. Only
> Firefox is running. So no resource problems. I have deferred all other
> installations until I can get darktable with openCL running. This is a
> sine-qua-non for me.
> So no luck... Again........
>
> Any ideas what could be the problem ??
>
> darktablerc parameters:
> opencl=true
> opencl_async_pixelpipe=false
> opencl_avoid_atomics=true
> opencl_checksum=
> opencl_device_priority=*/!0,*/*/*
> opencl_disable_drivers_blacklist=false
> opencl_library=
> opencl_mandatory_timeout=200
> opencl_memory_headroom=0
> opencl_memory_requirement=500
> opencl_micro_nap=1000
> opencl_number_event_handles=25
> opencl_scheduling_profile=default
> opencl_size_roundup=16
> opencl_synch_cache=active module
> opencl_use_cpu_devices=false
> opencl_use_pinned_memory=false
I would suggest to just use the open source driver provided by the kernel and
install ROCm for OpenCL.
http://repo.radeon.com/rocm/apt/
Works just fine on Fedora and openSUSE. I can't help you with the proprietary
driver.
Andreas
--
Andreas Schneider a...@cryptomilk.org
GPG-ID: 8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D
___________________________________________________________________________
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
___________________________________________________________________________ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
