Larry Hall <lh-no-personal-replies-please <at> cygwin.com> writes:
> > Unless you installed these services with a particular user specified (see > the '-u' flag of 'cygrunsrv'), none of the services should be using any > user mount. All services started by 'cygrunsrv', by default, run as > SYSTEM. If you did install the services (manually) specifying a particular > user account, you'll want to uninstall and reinstall those services and use > the default (SYSTEM) account. The fork error you reported here is not the > one I would have expected to see in the case where your services were being > run as a certain user but it may be the cause. You should also look at the > log files in /var/log to see if there is more information that will help > you determine what the cause of this error is. If you need to follow-up > with this list again on this issue, please read and follow the problem > reporting guidelines at <http://cygwin.com/problems.html>. > First, ==================================================================== $ telnet ito2 Trying 192.168.0.122... Connected to ITO2. Escape character is '^]'. CYGWIN_NT-5.1 1.5.16(0.128/4/2) (ITO2) (tty2) login: ==================================================================== all the services work when I was still using 1.5.16 as shown above. Second, I didn't do any manual installation of the services but used the init-config, exim-config, nfs-server-config and cygserver-config to install the services. And I did it by administrator a/c. I've never done any user mount at all. Thanks. Jason -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://cygwin.com/docs.html FAQ: http://cygwin.com/faq/
