I'm Cc'ing the Cygwin mailing-list since others may be interested in a S.M.A.R.T. tool that works with it. And someone may even be able to help you.
I got it to compile under Cygwin (without -mno-cygwin). What I did: mv os_generic.c os_generic.c.old ln -sf os_win32/os_win32.c os_generic.c Then configure and make as usual. During configure I got: checking for sigset... no During make I got: /d/Linux/smartmontools/sm5-Windows/os_generic.c:47: error: conflicting types for `strtoull' /usr/include/stdlib.h:174: error: previous declaration of `strtoull' /d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `strtoull': /d/Linux/smartmontools/sm5-Windows/os_generic.c:49: warning: int format, different type arg (arg 3) /d/Linux/smartmontools/sm5-Windows/os_generic.c:46: warning: unused parameter `base' /d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `make_device_names': /d/Linux/smartmontools/sm5-Windows/os_generic.c:99: warning: unused parameter `devlist' /d/Linux/smartmontools/sm5-Windows/os_generic.c:99: warning: unused parameter `name' /d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `ata_close': /d/Linux/smartmontools/sm5-Windows/os_generic.c:495: warning: unused parameter `fd' /d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `escalade_command_interface': /d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `fd' /d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `disknum' /d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `command' /d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `select' /d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `data' /d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `aspi_io_call': /d/Linux/smartmontools/sm5-Windows/os_generic.c:811: warning: long unsigned int format, HANDLE arg (arg 2) /d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `aspi_close': /d/Linux/smartmontools/sm5-Windows/os_generic.c:849: warning: unused parameter `fd' So, I commented the "Quick hack strtoull() for MSVC 6.0 using sscanf" part and it compiled. I don't know if it's the right thing to do. I guess the unused warnings won't allow it to work on SCSI drives ? Anyway, at least smartctl -a /dev/hda worked on my ATA drive: smartctl version 5.26 Copyright (C) 2002-3 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: MAXTOR 6L060J3 Serial Number: 663200252994 Firmware Version: A93.0500 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Mon Feb 23 18:18:41 2004 ESAST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 35) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 11 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 066 066 020 Pre-fail Always - 4287 4 Start_Stop_Count 0x0032 100 100 008 Old_age Always - 54 5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 093 023 Pre-fail Always - 0 9 Power_On_Hours 0x0012 076 076 001 Old_age Always - 16152 10 Spin_Retry_Count 0x0026 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 008 Old_age Always - 39 13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0 194 Temperature_Celsius 0x0022 080 074 042 Old_age Always - 51 195 Hardware_ECC_Recovered 0x001a 100 003 000 Old_age Always - 6672101 196 Reallocated_Event_Count 0x0010 100 100 020 Old_age Offline - 0 197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x001a 198 198 000 Old_age Always - 2 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10323 - # 2 Short offline Completed without error 00% 9584 - # 3 Short offline Completed without error 00% 9582 - # 4 Short offline Completed without error 00% 4924 - Please let me know of any other commands I should test. Only what won't eat my data or the drive itself. BTW, smartd also compiled, but reports everything in "Event Viewer". Here's: The description for Event ID ( 0 ) in Source ( smartd ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: smartd : PID 3384 : smartd version 5.26 Copyright (C) 2002-3 Bruce Allen. Then it repeats all the above in each message, so I removed them: Home page is http://smartmontools.sourceforge.net/ PID 3384 : Opened configuration file /etc/smartd.conf. Configuration file /etc/smartd.conf parsed.. Device: /dev/hda, opened. Device: /dev/hda, not found in smartd database.. Device: /dev/hda, is SMART capable. Adding to "monitor" list.. Monitoring 1 ATA and 0 SCSI devices. smartd has fork()ed into background mode. New PID=3428.. On Mon, 23 Feb 2004, Christian Franke wrote: > > >Any news ? > > > > > > Glad you asked. The Win32/MSVC6 sources are checked in on > RELEASE_5_26_WIN32_BRANCH. > > Checkout: cvs co -r RELEASE_5_26_WIN32_BRANCH sm5 > > Build: Open project "./os_win32/smartctl_vc6.dsp" in VC6 (or .NET), > select "Release" configuration and press F7 to build > ./os_win32/smartctl.exe. > > I will provide a plain Makefile later (The Makefile generation of VC6 is > somewhat broken). > > If you use the web interface to browse the sources, please note that the > new (branch-only) files (int64.h, posix/*, os_win32/*) appear in the > "Attic" directories. > > Thanks for any comment. -- How to contact me - http://www.pervalidus.net/contact.html -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://cygwin.com/docs.html FAQ: http://cygwin.com/faq/
