On Sun, Jul 4, 2010 at 1:07 AM, Larry Hall (Cygwin) wrote: > On 7/4/2010 1:01 AM, Alex Leigh wrote: >> >> Hi, >> >> I've been getting some STATUS_ACCESS_VIOLATION errors when running >> bash and some xwin programs, and after some searching I'm trying to >> run rebaseall to see if that would fix the problem. However, when >> running rebaseall from ash, I get the following error: "ReBaseImage >> (/usr/bin/cygcrypt-0.dll) failed with last error = 6". Searching >> around it seems error code 6 comes from the DLL being in use. However >> I made sure to close all running cygwin programs, and I went through >> each of my running programs to see if any of them loads that >> particular DLL, which none of them do. Could there be anything else >> that would cause rebaseall to fail on that particular DLL? Thanks. >> I've attached an output from cygcheck. > > Make sure you stopped all services and then reboot.
I rebooted, then shut down all non-essential programs and services, and still get the same error. This is baffling...is there anything else that could cause this error? Alex -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
