On Wed, Jul 16, 2008 at 02:13:22AM +0400, Stanislav Sedov wrote: > On Tue, 15 Jul 2008 23:05:14 +0200 > Bernd Walter <[EMAIL PROTECTED]> mentioned: > > > On Mon, Jul 14, 2008 at 11:48:09PM +0400, Stanislav Sedov wrote: > > > On Fri, 11 Jul 2008 23:19:09 +0200 > > > Jeremie Le Hen <[EMAIL PROTECTED]> mentioned: > > > > > > > Would you mind testing it with WITHOUT_SSP= at the top of > > > > lib/libc/Makefile? > > > > > > > > > > I'll try tomorrow. Currently, I have no access to the board. > > > > Is it this kind of problem: > > ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based > > forwarding enabled, default to accept, logging unlimited > > SD CARD: 1023934464 bytes > > mmcsd0: <mmc or sd flash card> on mmc0 > > mmc0: setting transfer rate to 30.000MHz > > Trying to mount root from ufs:/dev/mmcsd0s1a > > pid 20 (sh), uid 0: exited on signal 11 > > Jul 15 23:01:14 init: /bin/sh on /etc/rc terminated abnormally, going to > > single user mode > > Enter full pathname of shell or RETURN for /bin/sh: > > > > This happens for me with recent kernel and few days old 7-stable > > userland, so it shouldn't have anything to do with installed libc. > > > > Seems to be the same problem. However, it seems that just using libc > compiled w/out SSP solves it, although I haven't tested the entire > world yet.
Mmm... But don't have the SSP change at all, since I still have a 7-stable userland. Static compiled binaries (/rescue) works fine. -- B.Walter <[EMAIL PROTECTED]> http://www.bwct.de Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm. _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "[EMAIL PROTECTED]"
