On Wed, Apr 23, 2008 at 01:43:55PM -0700, Sam Leffler wrote: > Marius Strobl wrote: > >On Sat, Apr 12, 2008 at 09:33:58PM +0200, Marius Strobl wrote: > > > >>On Thu, Mar 20, 2008 at 04:19:26PM +0000, Sam Leffler wrote: > >> > >>>sam 2008-03-20 16:19:25 UTC > >>> > >>> FreeBSD src repository > >>> > >>> Modified files: > >>> sys/dev/usb ehci.c ohci.c > >>> Log: > >>> Workaround design botch in usb: blindly mixing bus_dma with PIO does > >>> not > >>> work on architectures with a write-back cache as the PIO writes end up > >>> in the cache which the sync(BUS_DMASYNC_POSTREAD) in > >>> usb_transfer_complete > >>> then discards; compensate in the xfer methods that do PIO by pushing > >>> the > >>> writes out of the cache before usb_transfer_complete is called. > >>> > >>> This fixes USB on xscale and likely other places. > >>> > >>> Sponsored by: hobnob > >>> Reviewed by: cognet, imp > >>> MFC after: 1 month > >>> > >>> Revision Changes Path > >>> 1.62 +16 -0 src/sys/dev/usb/ehci.c > >>> 1.171 +16 -0 src/sys/dev/usb/ohci.c > >>> > >>This causes a crash during boot on sparc64. Looks like map is still > >>NULL at that point. > >> > >> > > > >Are you ok with the change below or would that also prevent > >your kludge from taking effect? > > > >Marius > > > >Index: ehci.c > >=================================================================== > >RCS file: /usr/data/bsd/cvs/fbsd/src/sys/dev/usb/ehci.c,v > >retrieving revision 1.62 > >diff -u -r1.62 ehci.c > >--- ehci.c 20 Mar 2008 16:19:25 -0000 1.62 > >+++ ehci.c 23 Apr 2008 20:23:58 -0000 > >@@ -664,6 +664,8 @@ > > usbd_pipe_handle pipe = xfer->pipe; > > bus_dma_tag_t tag = pipe->device->bus->buffer_dmatag; > > struct usb_dma_mapping *dmap = &xfer->dmamap; > >+ if (dmap->map == NULL) > >+ return; > > bus_dmamap_sync(tag, dmap->map, BUS_DMASYNC_PREWRITE); > > } > > > >Index: ohci.c > >=================================================================== > >RCS file: /usr/data/bsd/cvs/fbsd/src/sys/dev/usb/ohci.c,v > >retrieving revision 1.171 > >diff -u -r1.171 ohci.c > >--- ohci.c 20 Mar 2008 16:19:25 -0000 1.171 > >+++ ohci.c 21 Apr 2008 19:13:54 -0000 > >@@ -1571,6 +1571,8 @@ > > usbd_pipe_handle pipe = xfer->pipe; > > bus_dma_tag_t tag = pipe->device->bus->buffer_dmatag; > > struct usb_dma_mapping *dmap = &xfer->dmamap; > >+ if (dmap->map == NULL) > >+ return; > > bus_dmamap_sync(tag, dmap->map, BUS_DMASYNC_PREWRITE); > > } > > > > > > > > > You have not identified why you don't have a dma map. I don't have a > way to diagnose your problem and so far as I know no other platform had > an issue w/ the change. I suggest you figure out why your map is not > setup instead of adding a hack. >
It's because the usb(4) code doesn't create DMA maps for zero-length transfers, see usbd_transfer(). In the case of the backtrace I posted not for usbd_set_address(), which does USETW(req.wLength, 0) so later on size is 0 in usbd_transfer() hence no DMA map. I don't know why your hack doesn't also crash other platforms. Marius _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "[EMAIL PROTECTED]"
