I was hoping you’d name all the NICs, IP ranges, Gateways and purposes of your network. It would be helpful if you also copied the relevant parts of the network.json file to gist or pastebin.
From: crowbar-bounces On Behalf Of Oguz Yarimtepe Sent: Friday, June 27, 2014 12:52 AM To: crowbar Subject: Re: [Crowbar] bastion network Adding a bastion network to the network json file before running the install script solved. On Fri, Jun 27, 2014 at 5:17 AM, <rob_hirschf...@dell.com<mailto:rob_hirschf...@dell.com>> wrote: The gateway is part of the network json file so you need it to be right there. It would help if you sent details of your planned network config. This is CB1 so I'm very rusty. Would be great for the CB1 contributors to chime in too Rob H 512-909-7219<tel:512-909-7219> -------- Original message -------- From: Oğuz Yarımtepe Date:06/25/2014 1:49 PM (GMT-08:00) To: crowbar Subject: [Crowbar] bastion network Hi, I am trying to add an external interface to a dual mode installation. I haven't installed the admin node, but planning to readh the admin node over a third interface. When i want to define a bastion network for crowbar admin, will i keep router and router_pref at admin part? I want mt default gw defined on the third interface, eth3. https://github.com/crowbar/crowbar/wiki/Editing-the-network-json says i need to run two commands. sudo crowbar network allocate_ip default $admin_name bastion admin sudo chef-client do they handle the default gw issue if i define router for admin network? -- Oğuz Yarımtepe http://about.me/oguzy -- Oğuz Yarımtepe http://about.me/oguzy
_______________________________________________ Crowbar mailing list Crowbar@dell.com https://lists.us.dell.com/mailman/listinfo/crowbar For more information: http://crowbar.github.com/
