On FreeBSD 13.1 (x86_64), there is 1 test failure:

FAIL: tests/misc/head-write-error

The log file is attached.
=========================================================
   GNU coreutils 9.1.198-e68b1: ./tests/test-suite.log
=========================================================

# TOTAL: 641
# PASS:  498
# SKIP:  141
# XFAIL: 0
# FAIL:  1
# XPASS: 0
# ERROR: 1

.. contents:: :depth: 2

SKIP: tests/tail-2/inotify-race
===============================

inotify-race.sh: skipped test: inotify is not supported
SKIP tests/tail-2/inotify-race.sh (exit status: 77)

SKIP: tests/tail-2/inotify-race2
================================

inotify-race2.sh: skipped test: inotify is not supported
SKIP tests/tail-2/inotify-race2.sh (exit status: 77)

SKIP: tests/rm/ext3-perf
========================

ext3-perf.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/rm/ext3-perf.sh (exit status: 77)

SKIP: tests/cp/link-heap
========================

link-heap.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/cp/link-heap.sh (exit status: 77)

SKIP: tests/cp/no-ctx
=====================

grep: /proc/filesystems: No such file or directory
no-ctx.sh: skipped test: this system lacks SELinux support
SKIP tests/cp/no-ctx.sh (exit status: 77)

SKIP: tests/misc/tty-eof
========================

tty-eof.pl: this script requires Perl's Expect package >=1.11
SKIP tests/misc/tty-eof.pl (exit status: 77)

SKIP: tests/tail-2/inotify-rotate
=================================

inotify-rotate.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/tail-2/inotify-rotate.sh (exit status: 77)

SKIP: tests/tail-2/inotify-rotate-resources
===========================================

inotify-rotate-resources.sh: skipped test: inotify required
SKIP tests/tail-2/inotify-rotate-resources.sh (exit status: 77)

SKIP: tests/tail-2/inotify-dir-recreate
=======================================

inotify-dir-recreate.sh: skipped test: inotify is not supported
SKIP tests/tail-2/inotify-dir-recreate.sh (exit status: 77)

SKIP: tests/tail-2/inotify-only-regular
=======================================

inotify-only-regular.sh: skipped test: inotify support required
SKIP tests/tail-2/inotify-only-regular.sh (exit status: 77)

SKIP: tests/rm/fail-eperm
=========================

fail-eperm.xpl: couldn't find a file not owned by you
 in any of the following directories:
  /tmp /var/tmp /usr/tmp
...so, skipping this test
SKIP tests/rm/fail-eperm.xpl (exit status: 77)

SKIP: tests/rm/hash
===================

hash.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/rm/hash.sh (exit status: 77)

SKIP: tests/rm/r-root
=====================

diff -u /dev/null err
--- /dev/null	1970-01-01
+++ err	1970-01-01
+warning: Could not load shared library symbols for [vdso].
+Do you need "set solib-search-path" or "set sysroot"?
warning: Could not load shared library symbols for [vdso].
Do you need "set solib-search-path" or "set sysroot"?
r-root.sh: skipped test: internal test failure: maybe LD_PRELOAD or gdb doesn't work?
SKIP tests/rm/r-root.sh (exit status: 77)

SKIP: tests/rm/many-dir-entries-vs-OOM
======================================

many-dir-entries-vs-OOM.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/rm/many-dir-entries-vs-OOM.sh (exit status: 77)

ERROR: tests/misc/env-signal-handler
====================================

--- exp-err1	2023-03-14 23:14:53.934560000 +0100
+++ err1	2023-03-14 23:14:53.934356000 +0100
@@ -1 +1,2 @@
 seq: write error:
+seq: write error:
env-signal-handler.sh: set-up failure: 
ERROR tests/misc/env-signal-handler.sh (exit status: 99)

SKIP: tests/misc/seq-long-double
================================

long.c:1:10: fatal error: 'features.h' file not found
#include <features.h>
         ^~~~~~~~~~~~
1 error generated.
seq-long-double.sh: skipped test: this test runs only on systems with glibc and long double != double
SKIP tests/misc/seq-long-double.sh (exit status: 77)

SKIP: tests/tail-2/tail-n0f
===========================

tail-n0f.sh: skipped test: /proc/52024/status: missing or 'different'
SKIP tests/tail-2/tail-n0f.sh (exit status: 77)

SKIP: tests/misc/arch
=====================

arch: not built
arch.sh: skipped test: required program(s) not built
SKIP tests/misc/arch.sh (exit status: 77)

SKIP: tests/misc/coreutils
==========================

coreutils: not built
coreutils.sh: skipped test: required program(s) not built
SKIP tests/misc/coreutils.sh (exit status: 77)

SKIP: tests/misc/cat-proc
=========================

cat-proc.sh: skipped test: no /proc/cpuinfo
SKIP tests/misc/cat-proc.sh (exit status: 77)

FAIL: tests/misc/head-write-error
=================================

--- exp	2023-03-14 23:15:30.152292000 +0100
+++ err	2023-03-14 23:15:30.157366000 +0100
@@ -1 +1,2 @@
 head: error writing 'standard output'
+head: write error
--- exp	2023-03-14 23:15:30.152292000 +0100
+++ err	2023-03-14 23:15:30.163866000 +0100
@@ -1 +1,2 @@
 head: error writing 'standard output'
+head: write error
--- exp	2023-03-14 23:15:30.152292000 +0100
+++ err	2023-03-14 23:15:30.170420000 +0100
@@ -1 +1,2 @@
 head: error writing 'standard output'
+head: write error
--- exp	2023-03-14 23:15:30.152292000 +0100
+++ err	2023-03-14 23:15:30.175754000 +0100
@@ -1 +1,2 @@
 head: error writing 'standard output'
+head: write error
--- exp	2023-03-14 23:15:30.152292000 +0100
+++ err	2023-03-14 23:15:30.182146000 +0100
@@ -1 +1,2 @@
 head: error writing 'standard output'
+head: write error
--- exp	2023-03-14 23:15:30.152292000 +0100
+++ err	2023-03-14 23:15:30.189499000 +0100
@@ -1 +1,2 @@
 head: error writing 'standard output'
+head: write error
--- exp	2023-03-14 23:15:30.152292000 +0100
+++ err	2023-03-14 23:15:30.196452000 +0100
@@ -1 +1,2 @@
 head: error writing 'standard output'
+head: write error
--- exp	2023-03-14 23:15:30.152292000 +0100
+++ err	2023-03-14 23:15:30.201334000 +0100
@@ -1 +1,2 @@
 head: error writing 'standard output'
+head: write error
FAIL tests/misc/head-write-error.sh (exit status: 1)

SKIP: tests/misc/runcon-compute
===============================

runcon: runcon may be used only on a SELinux kernel
runcon-compute.sh: skipped test: runcon setup failed
SKIP tests/misc/runcon-compute.sh (exit status: 77)

SKIP: tests/misc/shuf-reservoir
===============================

shuf-reservoir.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/misc/shuf-reservoir.sh (exit status: 77)

SKIP: tests/misc/sort-benchmark-random
======================================

sort-benchmark-random.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/misc/sort-benchmark-random.sh (exit status: 77)

SKIP: tests/misc/sort-compress-hang
===================================

sort-compress-hang.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/misc/sort-compress-hang.sh (exit status: 77)

SKIP: tests/misc/sort-compress-proc
===================================

sort-compress-proc.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/misc/sort-compress-proc.sh (exit status: 77)

SKIP: tests/misc/sort-h-thousands-sep
=====================================

sort-h-thousands-sep.sh: skipped test: The Swedish locale with blank thousands separator is unavailable.
SKIP tests/misc/sort-h-thousands-sep.sh (exit status: 77)

SKIP: tests/misc/sort-month
===========================

sort-month.sh: skipped test: The locale utility is not present
SKIP tests/misc/sort-month.sh (exit status: 77)

SKIP: tests/misc/sort-spinlock-abuse
====================================

sort-spinlock-abuse.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/misc/sort-spinlock-abuse.sh (exit status: 77)

SKIP: tests/misc/sort-stale-thread-mem
======================================

sort-stale-thread-mem.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/misc/sort-stale-thread-mem.sh (exit status: 77)

SKIP: tests/misc/stty
=====================

stty.sh: skipped test: no strace program
SKIP tests/misc/stty.sh (exit status: 77)

SKIP: tests/misc/stty-pairs
===========================

stty-pairs.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/misc/stty-pairs.sh (exit status: 77)

SKIP: tests/misc/tac-continue
=============================

tac-continue.sh: skipped test: FULL_PARTITION_TMPDIR not defined
SKIP tests/misc/tac-continue.sh (exit status: 77)

SKIP: tests/misc/timeout-group
==============================

../tests/misc/timeout-group.sh: setsid: not found
timeout-group.sh: skipped test: setsid required to control groups
SKIP tests/misc/timeout-group.sh (exit status: 77)

SKIP: tests/misc/xattr
======================

cp: cannot preserve extended attributes, cp is built without xattr support
xattr.sh: skipped test: coreutils built without xattr support
SKIP tests/misc/xattr.sh (exit status: 77)

SKIP: tests/cp/acl
==================

acl.sh: skipped test: This test requires getfacl and setfacl.
SKIP tests/cp/acl.sh (exit status: 77)

SKIP: tests/cp/sparse-extents
=============================

sparse-extents.sh: skipped test: insufficient SEEK_DATA support
SKIP tests/cp/sparse-extents.sh (exit status: 77)

SKIP: tests/cp/sparse-perf
==========================

sparse-perf.sh: skipped test: insufficient SEEK_DATA support
SKIP tests/cp/sparse-perf.sh (exit status: 77)

SKIP: tests/cp/sparse-2
=======================

sparse-2.sh: skipped test: insufficient SEEK_DATA support
SKIP tests/cp/sparse-2.sh (exit status: 77)

SKIP: tests/cp/nfs-removal-race
===============================

nfs-removal-race.sh: skipped test: LD_PRELOAD was ineffective?
SKIP tests/cp/nfs-removal-race.sh (exit status: 77)

SKIP: tests/cp/perm
===================

perm.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/cp/perm.sh (exit status: 77)

SKIP: tests/cp/proc-short-read
==============================

proc-short-read.sh: skipped test: your system lacks /proc/cpuinfo
SKIP tests/cp/proc-short-read.sh (exit status: 77)

SKIP: tests/df/df-symlink
=========================

df: zroot/usr/home: No such file or directory
df-symlink.sh: skipped test: cannot get info for zroot/usr/home
SKIP tests/df/df-symlink.sh (exit status: 77)

SKIP: tests/df/no-mtab-status
=============================

Filesystem         1K-blocks    Used Available Use% Mounted on
zroot/ROOT/default   6055848 1936392   4119456  32% /
zroot/tmp            4122000    2544   4119456   1% /tmp
zroot/usr/home       5162404 1042948   4119456  21% /usr/home
zroot/usr/ports      4119552      96   4119456   1% /usr/ports
zroot/var/tmp        4119552      96   4119456   1% /var/tmp
zroot/var/crash      4119552      96   4119456   1% /var/crash
zroot/var/log        4119780     324   4119456   1% /var/log
zroot/var/mail       4119592     136   4119456   1% /var/mail
zroot/usr/src        4119552      96   4119456   1% /usr/src
zroot/var/audit      4119552      96   4119456   1% /var/audit
zroot                4119552      96   4119456   1% /zroot
no-mtab-status.sh: skipped test: no mntent.h available to confirm the interface
SKIP tests/df/no-mtab-status.sh (exit status: 77)

SKIP: tests/df/skip-duplicates
==============================

/
skip-duplicates.sh: skipped test: no mntent.h available to confirm the interface
SKIP tests/df/skip-duplicates.sh (exit status: 77)

SKIP: tests/df/skip-rootfs
==========================

Filesystem         1K-blocks    Used Available Use% Mounted on
zroot/ROOT/default   6055848 1936392   4119456  32% /
zroot/tmp            4122000    2544   4119456   1% /tmp
zroot/usr/home       5162404 1042948   4119456  21% /usr/home
zroot/usr/ports      4119552      96   4119456   1% /usr/ports
zroot/var/tmp        4119552      96   4119456   1% /var/tmp
zroot/var/crash      4119552      96   4119456   1% /var/crash
zroot/var/log        4119780     324   4119456   1% /var/log
zroot/var/mail       4119592     136   4119456   1% /var/mail
zroot/usr/src        4119552      96   4119456   1% /usr/src
zroot/var/audit      4119552      96   4119456   1% /var/audit
zroot                4119552      96   4119456   1% /zroot
skip-rootfs.sh: skipped test: no rootfs in mtab
SKIP tests/df/skip-rootfs.sh (exit status: 77)

SKIP: tests/dd/nocache_eof
==========================

nocache_eof.sh: skipped test: no strace program
SKIP tests/dd/nocache_eof.sh (exit status: 77)

SKIP: tests/du/2g
=================

2g.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/du/2g.sh (exit status: 77)

SKIP: tests/du/fd-leak
======================

fd-leak.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/du/fd-leak.sh (exit status: 77)

SKIP: tests/du/long-from-unreadable
===================================

long-from-unreadable.sh: skipped test: This test would fail, since your system lacks /proc support.
SKIP tests/du/long-from-unreadable.sh (exit status: 77)

SKIP: tests/du/move-dir-while-traversing
========================================

../tests/du/move-dir-while-traversing.sh: python: not found
move-dir-while-traversing.sh: skipped test: python inotify package not installed
SKIP tests/du/move-dir-while-traversing.sh (exit status: 77)

SKIP: tests/du/threshold
========================

threshold.sh: skipped test: block size of an empty file unequal Zero
SKIP tests/du/threshold.sh (exit status: 77)

SKIP: tests/id/gnu-zero-uids
============================

gnu-zero-uids.sh: skipped test: not running on GNU/Hurd
SKIP tests/id/gnu-zero-uids.sh (exit status: 77)

SKIP: tests/id/no-context
=========================

grep: /proc/filesystems: No such file or directory
no-context.sh: skipped test: this system lacks SELinux support
SKIP tests/id/no-context.sh (exit status: 77)

SKIP: tests/id/context
======================

grep: /proc/filesystems: No such file or directory
context.sh: skipped test: this system lacks SELinux support
SKIP tests/id/context.sh (exit status: 77)

SKIP: tests/id/smack
====================

grep: /proc/filesystems: No such file or directory
smack.sh: skipped test: this system lacks SMACK support
SKIP tests/id/smack.sh (exit status: 77)

SKIP: tests/install/install-C-selinux
=====================================

grep: /proc/filesystems: No such file or directory
install-C-selinux.sh: skipped test: this system lacks SELinux support
SKIP tests/install/install-C-selinux.sh (exit status: 77)

SKIP: tests/install/install-Z-selinux
=====================================

grep: /proc/filesystems: No such file or directory
install-Z-selinux.sh: skipped test: this system lacks SELinux support
SKIP tests/install/install-Z-selinux.sh (exit status: 77)

SKIP: tests/ls/no-cap
=====================

no-cap.sh: skipped test: no strace program
SKIP tests/ls/no-cap.sh (exit status: 77)

SKIP: tests/ls/slink-acl
========================

setfacl: acltestdir_: there are no default entries in NFSv4 ACLs
slink-acl.sh: skipped test: setfacl does not work on the current file system
SKIP tests/ls/slink-acl.sh (exit status: 77)

SKIP: tests/ls/stat-free-color
==============================

stat-free-color.sh: skipped test: no strace program
SKIP tests/ls/stat-free-color.sh (exit status: 77)

SKIP: tests/ls/stat-free-symlinks
=================================

stat-free-symlinks.sh: skipped test: no strace program
SKIP tests/ls/stat-free-symlinks.sh (exit status: 77)

SKIP: tests/mkdir/p-acl
=======================

setfacl: acltestdir_: there are no default entries in NFSv4 ACLs
p-acl.sh: skipped test: setfacl does not work on the current file system
SKIP tests/mkdir/p-acl.sh (exit status: 77)

SKIP: tests/mkdir/selinux
=========================

grep: /proc/filesystems: No such file or directory
selinux.sh: skipped test: this system lacks SELinux support
SKIP tests/mkdir/selinux.sh (exit status: 77)

SKIP: tests/mkdir/restorecon
============================

grep: /proc/filesystems: No such file or directory
restorecon.sh: skipped test: this system lacks SELinux support
SKIP tests/mkdir/restorecon.sh (exit status: 77)

SKIP: tests/mkdir/smack-no-root
===============================

grep: /proc/filesystems: No such file or directory
smack-no-root.sh: skipped test: this system lacks SMACK support
SKIP tests/mkdir/smack-no-root.sh (exit status: 77)

SKIP: tests/mv/acl
==================

acl.sh: skipped test: This test requires getfacl and setfacl.
SKIP tests/mv/acl.sh (exit status: 77)

SKIP: tests/mv/atomic
=====================

atomic.sh: skipped test: no strace program
SKIP tests/mv/atomic.sh (exit status: 77)

SKIP: tests/mv/atomic2
======================

atomic2.sh: skipped test: no strace program
SKIP tests/mv/atomic2.sh (exit status: 77)

SKIP: tests/mv/i-3
==================

FreeBSD
i-3.sh: skipped test: known spurious failure on *BSD
SKIP tests/mv/i-3.sh (exit status: 77)

SKIP: tests/mv/leak-fd
======================

leak-fd.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/mv/leak-fd.sh (exit status: 77)

SKIP: tests/mv/symlink-onto-hardlink-to-self
============================================

symlink-onto-hardlink-to-self.sh: skipped test: your kernel or file system cannot create a hard link to a symlink
SKIP tests/mv/symlink-onto-hardlink-to-self.sh (exit status: 77)

SKIP: tests/tail-2/big-4gb
==========================

big-4gb.sh: skipped test: expensive: disabled by default
This test is relatively expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-expensive

SKIP tests/tail-2/big-4gb.sh (exit status: 77)

SKIP: tests/chown/basic
=======================

basic.sh: skipped test: must be run as root
SKIP tests/chown/basic.sh (exit status: 77)

SKIP: tests/cp/cp-a-selinux
===========================

cp-a-selinux.sh: skipped test: must be run as root
SKIP tests/cp/cp-a-selinux.sh (exit status: 77)

SKIP: tests/cp/preserve-gid
===========================

preserve-gid.sh: skipped test: must be run as root
SKIP tests/cp/preserve-gid.sh (exit status: 77)

SKIP: tests/cp/special-bits
===========================

special-bits.sh: skipped test: must be run as root
SKIP tests/cp/special-bits.sh (exit status: 77)

SKIP: tests/cp/cp-mv-enotsup-xattr
==================================

cp-mv-enotsup-xattr.sh: skipped test: must be run as root
SKIP tests/cp/cp-mv-enotsup-xattr.sh (exit status: 77)

SKIP: tests/cp/capability
=========================

capability.sh: skipped test: must be run as root
SKIP tests/cp/capability.sh (exit status: 77)

SKIP: tests/cp/sparse-extents-2
===============================

sparse-extents-2.sh: skipped test: insufficient SEEK_DATA support
SKIP tests/cp/sparse-extents-2.sh (exit status: 77)

SKIP: tests/cp/cross-dev-symlink
================================

cross-dev-symlink.sh: skipped test: must be run as root
SKIP tests/cp/cross-dev-symlink.sh (exit status: 77)

SKIP: tests/dd/skip-seek-past-dev
=================================

skip-seek-past-dev.sh: skipped test: must be run as root
SKIP tests/dd/skip-seek-past-dev.sh (exit status: 77)

SKIP: tests/df/problematic-chars
================================

problematic-chars.sh: skipped test: must be run as root
SKIP tests/df/problematic-chars.sh (exit status: 77)

SKIP: tests/df/over-mount-device
================================

over-mount-device.sh: skipped test: must be run as root
SKIP tests/df/over-mount-device.sh (exit status: 77)

SKIP: tests/du/bind-mount-dir-cycle
===================================

bind-mount-dir-cycle.sh: skipped test: must be run as root
SKIP tests/du/bind-mount-dir-cycle.sh (exit status: 77)

SKIP: tests/du/bind-mount-dir-cycle-v2
======================================

bind-mount-dir-cycle-v2.sh: skipped test: must be run as root
SKIP tests/du/bind-mount-dir-cycle-v2.sh (exit status: 77)

SKIP: tests/id/setgid
=====================

setgid.sh: skipped test: must be run as root
SKIP tests/id/setgid.sh (exit status: 77)

SKIP: tests/install/install-C-root
==================================

install-C-root.sh: skipped test: must be run as root
SKIP tests/install/install-C-root.sh (exit status: 77)

SKIP: tests/ls/capability
=========================

capability.sh: skipped test: must be run as root
SKIP tests/ls/capability.sh (exit status: 77)

SKIP: tests/ls/nameless-uid
===========================

nameless-uid.sh: skipped test: must be run as root
SKIP tests/ls/nameless-uid.sh (exit status: 77)

SKIP: tests/misc/chcon
======================

chcon.sh: skipped test: must be run as root
SKIP tests/misc/chcon.sh (exit status: 77)

SKIP: tests/misc/chroot-credentials
===================================

chroot-credentials.sh: skipped test: must be run as root
SKIP tests/misc/chroot-credentials.sh (exit status: 77)

SKIP: tests/misc/selinux
========================

selinux.sh: skipped test: must be run as root
SKIP tests/misc/selinux.sh (exit status: 77)

SKIP: tests/misc/truncate-owned-by-other
========================================

truncate-owned-by-other.sh: skipped test: must be run as root
SKIP tests/misc/truncate-owned-by-other.sh (exit status: 77)

SKIP: tests/mkdir/writable-under-readonly
=========================================

writable-under-readonly.sh: skipped test: must be run as root
SKIP tests/mkdir/writable-under-readonly.sh (exit status: 77)

SKIP: tests/mkdir/smack-root
============================

grep: /proc/filesystems: No such file or directory
smack-root.sh: skipped test: this system lacks SMACK support
SKIP tests/mkdir/smack-root.sh (exit status: 77)

SKIP: tests/mv/hardlink-case
============================

hardlink-case.sh: skipped test: must be run as root
SKIP tests/mv/hardlink-case.sh (exit status: 77)

SKIP: tests/mv/sticky-to-xpart
==============================

sticky-to-xpart.sh: skipped test: must be run as root
SKIP tests/mv/sticky-to-xpart.sh (exit status: 77)

SKIP: tests/rm/fail-2eperm
==========================

fail-2eperm.sh: skipped test: must be run as root
SKIP tests/rm/fail-2eperm.sh (exit status: 77)

SKIP: tests/rm/no-give-up
=========================

no-give-up.sh: skipped test: must be run as root
SKIP tests/rm/no-give-up.sh (exit status: 77)

SKIP: tests/rm/one-file-system
==============================

one-file-system.sh: skipped test: must be run as root
SKIP tests/rm/one-file-system.sh (exit status: 77)

SKIP: tests/rm/read-only
========================

read-only.sh: skipped test: must be run as root
SKIP tests/rm/read-only.sh (exit status: 77)

SKIP: tests/rm/empty-immutable-skip
===================================

empty-immutable-skip.sh: skipped test: must be run as root
SKIP tests/rm/empty-immutable-skip.sh (exit status: 77)

SKIP: tests/tail-2/append-only
==============================

append-only.sh: skipped test: must be run as root
SKIP tests/tail-2/append-only.sh (exit status: 77)

SKIP: tests/tail-2/end-of-device
================================

end-of-device.sh: skipped test: must be run as root
SKIP tests/tail-2/end-of-device.sh (exit status: 77)

SKIP: tests/touch/now-owned-by-other
====================================

now-owned-by-other.sh: skipped test: must be run as root
SKIP tests/touch/now-owned-by-other.sh (exit status: 77)

SKIP: tests/factor/t00
======================

t00.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t00.sh (exit status: 77)

SKIP: tests/factor/t01
======================

t01.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t01.sh (exit status: 77)

SKIP: tests/factor/t02
======================

t02.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t02.sh (exit status: 77)

SKIP: tests/factor/t03
======================

t03.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t03.sh (exit status: 77)

SKIP: tests/factor/t04
======================

t04.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t04.sh (exit status: 77)

SKIP: tests/factor/t05
======================

t05.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t05.sh (exit status: 77)

SKIP: tests/factor/t06
======================

t06.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t06.sh (exit status: 77)

SKIP: tests/factor/t07
======================

t07.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t07.sh (exit status: 77)

SKIP: tests/factor/t08
======================

t08.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t08.sh (exit status: 77)

SKIP: tests/factor/t09
======================

t09.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t09.sh (exit status: 77)

SKIP: tests/factor/t10
======================

t10.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t10.sh (exit status: 77)

SKIP: tests/factor/t11
======================

t11.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t11.sh (exit status: 77)

SKIP: tests/factor/t12
======================

t12.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t12.sh (exit status: 77)

SKIP: tests/factor/t13
======================

t13.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t13.sh (exit status: 77)

SKIP: tests/factor/t14
======================

t14.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t14.sh (exit status: 77)

SKIP: tests/factor/t15
======================

t15.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t15.sh (exit status: 77)

SKIP: tests/factor/t16
======================

t16.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t16.sh (exit status: 77)

SKIP: tests/factor/t17
======================

t17.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t17.sh (exit status: 77)

SKIP: tests/factor/t18
======================

t18.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t18.sh (exit status: 77)

SKIP: tests/factor/t19
======================

t19.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t19.sh (exit status: 77)

SKIP: tests/factor/t20
======================

t20.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t20.sh (exit status: 77)

SKIP: tests/factor/t21
======================

t21.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t21.sh (exit status: 77)

SKIP: tests/factor/t22
======================

t22.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t22.sh (exit status: 77)

SKIP: tests/factor/t23
======================

t23.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t23.sh (exit status: 77)

SKIP: tests/factor/t24
======================

t24.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t24.sh (exit status: 77)

SKIP: tests/factor/t25
======================

t25.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t25.sh (exit status: 77)

SKIP: tests/factor/t26
======================

t26.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t26.sh (exit status: 77)

SKIP: tests/factor/t27
======================

t27.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t27.sh (exit status: 77)

SKIP: tests/factor/t28
======================

t28.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t28.sh (exit status: 77)

SKIP: tests/factor/t29
======================

t29.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t29.sh (exit status: 77)

SKIP: tests/factor/t30
======================

t30.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t30.sh (exit status: 77)

SKIP: tests/factor/t31
======================

t31.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t31.sh (exit status: 77)

SKIP: tests/factor/t32
======================

t32.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t32.sh (exit status: 77)

SKIP: tests/factor/t33
======================

t33.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t33.sh (exit status: 77)

SKIP: tests/factor/t34
======================

t34.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t34.sh (exit status: 77)

SKIP: tests/factor/t35
======================

t35.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t35.sh (exit status: 77)

SKIP: tests/factor/t36
======================

t36.sh: skipped test: very expensive: disabled by default
This test is very expensive, so it is disabled by default.
To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS
environment variable set to yes.  E.g.,

  env RUN_VERY_EXPENSIVE_TESTS=yes make check

or use the shortcut target of the toplevel Makefile,

  make check-very-expensive

SKIP tests/factor/t36.sh (exit status: 77)

Reply via email to