Hello, I selected "Run GOP Driver" for graphics initialization mode and I put a valid VBT binary. FSP somehow quits before even executing PeiGraphics-EntryPoint. In my opinion, if it didn't quit there, it would successfully initialize graphics. I wonder how that happens. After Serialloinit, FSP does PCI enumeration and then notifys "Ready to Boot". It is strange. On Salı, Nisan 4, 2023, 5:59 ÖS, Matt DeVillier <matt.devill...@gmail.com> wrote: > coreboot needs to initialize the display and provide the framebuffer for edk2 >to use. What display init option do you have selected? It needs to be 'RUN FSP >GOP' and a valid VBT is needed for the FSP PEI GOP driver to successfully >execute On Tue, Apr 4, 2023 at 8:17 AM cagatay bagci via coreboot <coreboot@coreboot.org> wrote: Hello all,I have a custom CFL board. I used Tianocore UEFI payload. It boots without problem on console and I can enter BIOS menu. I put appropriate vbt.bin file and added that path to config file, so VBT exists. However, I cannot get display output. I inspected debug log and it says "graphics hand-off block not found" in one line. I understand that FSP does not build "gEfiGraphicsInfoHobGuid". Do you have an idea why FSP does not produce that HOB? In addition to that, by using FSP debug binary, I can see that FSP does not even enter PeiGraphicsEntryPoint. It somehow quits after "SerialIoInit() Start" and notifys Post PCI Enumeration. Thanks, _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
_______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
