Morning, Just checking in to see if anyone had some advice on where I could look to try and fix this problem. Note that it also happens for sleep and suspend modes, not just shutdowns.
Thanks, Rafael Am Do., 12. Jan. 2023 um 09:16 Uhr schrieb Rafael Send < flyingfishfin...@gmail.com>: > Oh, there's not currently a battery installed - so that would do it. > Thanks for a lead. > > What's the path to fixing that? Different EC blob extracted from stock > BIOS, something in Coreboot to check? > > R > > Am Do., 12. Jan. 2023 um 09:11 Uhr schrieb Matt DeVillier < > matt.devill...@gmail.com>: > >> sounds to me like AP shutdown is causing the EC to power off as well, so >> it's not active to respond to the subsequent power button press. Not sure >> why disconnecting AC power would reset that though, unless you are also >> disconnecting the internal battery as well >> >> On Thu, Jan 12, 2023 at 11:08 AM Rafael Send <flyingfishfin...@gmail.com> >> wrote: >> >>> Hi, >>> As folks may have gathered from my other question about the GCC build >>> environment, I've been playing around with the old X2100 port ( >>> https://github.com/mjg59/coreboot/tree/x2100_ng). >>> >>> I got it to build and added the latest version of MrChromebox's >>> Tianocore, but there's still one issue that keep is from being very useable. >>> >>> After flashing / plugging in the machine, the power button will turn it >>> on, but only once. If I shut down any OS, or even if it goes to sleep or >>> suspends, the power button no longer has any effect so the only "fix" is >>> currently to unplug power and re-plug it. >>> >>> Where might I look for causes of this? Is it a shutdown state thing? >>> ACPI? >>> >>> Thanks, >>> Rafael >>> _______________________________________________ >>> coreboot mailing list -- coreboot@coreboot.org >>> To unsubscribe send an email to coreboot-le...@coreboot.org >>> >>
_______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
