Hi everyone, I'm looking at the board list again currently for a Home-NAS/Nextcloud build that supports both ECC RAM and has multiple SATA3 ports. Since the system will be connected to the outside permanently, I also want to reduce obscure remote management firmware as much as feasible.
I've found these two workstation boards: ASUS P8C WS (https://doc.coreboot.org/mainboard/asus/p8c_ws.html) Supermicro X9SAE (https://doc.coreboot.org/mainboard/supermicro/x9sae.html) They both fit the bill pretty well, apparently ECC is supported and Ivy Bridge means the ME could be cleaned mostly without needing any other blobs. However, I've found NOTHING on the support status for these boards. The old page says P8C-WS support is "Unknown" and the Supermicro board is not even listed. The mail archive also finds nothing on them. The ASUS' doc-page states that it's actually written for the "ASUS P8H77-V" model at the top. Yet, both debug descriptions seem well-written and trustworthy... Has anybody ever really used those boards and can confirm if they work at all, before I try to go out and buy one of them? I can't find any info on who ported or tested them. Are they included in the automatic config device-list? Kind regards! _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
