Hi, Thanks for catching this. I will look into it. Most of the ACPI however is not mainboard specific. My setup contains a RADEON GPU and i7-3770 CPU.
Best regards, -- Michał Żygowski Firmware Engineer https://3mdeb.com | @3mdeb_com On 17.09.2020 17:33, Henkaku wrote: > After booting into Linux kacpid is constantly using 100% CPU and ACPI > interrupt is firing at ~10k/s. > > My test environment is Optiplex 9010 with i5-3470 with dual channel DDR3 > and an Nvidia GTX1650 installed as DGPU, running Fedora 32. > > Coreboot logs and Linux dmesg is attached below. Captured with a build > of earlier master but still reproducible on the latest master. > > _______________________________________________ > coreboot mailing list -- coreboot@coreboot.org > To unsubscribe send an email to coreboot-le...@coreboot.org
_______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
