Hi Dalao, On Sun, Mar 15, 2020 at 1:09 AM Dalao <[email protected]> wrote: > > Thanks and it seems if I enable these configs it will not boot: > > CONFIG_CONSOLE_SPI_FLASH=y > CONFIG_SPI_CONSOLE=y > CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8=y
There should be no need to use such a high log level. It slows down boot a lot for no good reason. About the SPI console, I wonder why there are two different settings. Please try with only CONFIG_CONSOLE_SPI_FLASH. > At the very beginning I did not enable these settings, I believe it's due to > lack the microcode extracted from vendor's BIOS. > > Mar 15, 2020, 06:35 by [email protected]: > > Hi Dalao, > > On Sat, Mar 14, 2020 at 10:26 PM Dalao via coreboot > <[email protected]> wrote: > > Finally make it boot now! I have asked for help on reddit > https://www.reddit.com/r/coreboot/comments/fibu68/after_several_days_work_still_cant_get_coreboot/ > and thanks to p4block he made a build and it works and he shared his config > https://hastebin.com/ojihusirok.ini > > I pulled the latest master and build using his config and it works! But I > still do't know what't the extract problem for my build... > > > Please use "make savedefconfig" with your settings. The full config is > too bloated and it's hard to see what differs from defaults (what the > defconfig contains). > > Best regards, > > Angel Pons > > PS: I've omitted the unnecessary quoted text from this reply. If > context is needed, it can be found in previous messages. Best regards, Angel Pons _______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
