On 04.02.2020 12:17, Valentin wrote: > Hello, Hi, > > I've built coreboot for a asrock e350m1 mainboard before the weekend > and with the current version SATA disks were not detected. Neither by > SeaBIOS nor in a current Linux system booted from USB. > > As previos versions worked just fine i narrowed it down to the commit > 94c47c0 [https://review.coreboot.org/c/coreboot/+/37703], it's the > first commit that shows this problem. > It seems to me that the rrot cause is that since this commit > sb_Poweron_Init() for the sb800 isn't called anywhere, but I'm not > sure about the right way to include it. > Could anyone help with that? > sb_Poweron_Init is called in platform_BeforeInitReset in agesa family 14 state machine. Also by looking at latest board status, the SATA was working: https://review.coreboot.org/cgit/board-status.git/tree/asrock/e350m1/4.11-903-g941c9ac074/2020-01-15T18_54_40Z/coreboot_console.txt
Line 1180: |AHCI/0: Set transfer mode to UDMA-6 Searching bios-geometry for: /pci@i0cf8/*@11/drive@0/disk@0 AHCI/0: registering: "AHCI/0: SanDisk SDSSDP064G ATA-9 Hard-Disk (61057 MiBytes)"| Don't know exactly what could cause it. I would try to build with the same config and repo revision as in the board status. > Thanks, > Valentin Regards, -- Michał Żygowski Firmware Engineer http://3mdeb.com | @3mdeb_com > _______________________________________________ > coreboot mailing list -- [email protected] > To unsubscribe send an email to [email protected]
_______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
