Hi Ben, Many thanks for your reply, then I suppose the best option is the PCU UART I'll continue with that
Thanks and best regards Adrián -----Mensaje original----- De: Ben Gardner [mailto:[email protected]] Enviado el: 19 April 2016 17:26 Para: Adrian Perez Resa CC: [email protected] Asunto: Re: [coreboot] Using High Speed UART1 as Serial port on CoreBoot (MinnowBoard) Hi Adrian, You are better off hooking up to the "Serial Console" port and using that. http://wiki.minnowboard.org/MinnowBoard_MAX If you really want to use one of the HS UARTs, then you have a bit of work to do. See src/drivers/uart/uart8250mem.c and note the use of CONFIG_DRIVERS_UART_8250MEM_32. You'd need to implement something similar to src/soc/intel/skylake/romstage/uart.c, but for the E3800. Not worth it, in my opinion, as the PCU UART works just fine. Ben On Tue, Apr 19, 2016 at 9:27 AM, Adrian Perez Resa <[email protected]> wrote: > Hello everybody, > > > > I am newby with minnow board and CoreBoot. > > I am trying to use HIGH Speed UART1 as Serial port on CoreBoot > (SIO_UART 1 > pins) with no success. > > > > I have tried to configure CoreBoot with the following options: > > - Console > Index for UART port to use for console -> ‘0’ > > o Baud rate 115200 > > > > But I don’t know exactly what serial port I am using… > > > > High speed UART 1 (SIO UART 1) is connected to JP1 Header in minnow Board. > > However, Serial port seems to be always on the default debug UART > (connector > J4 on Minnow Board). > > This Debug UART is attached at ATOM GPIOS GPIO_S0_SC_57 and > GPIO_S0_SC_61 pins. > > > > Does anybody know what options are necessary to change for using a > different uart than the default one…? > > > > Thanks in advance! > > > > Best regards > > > > > > -- > Adrian Perez Resa > Dpto. Innovación y Desarrollo > Telnet Redes Inteligentes S.A. > http://www.telnet-ri.es > Tel: (+34)976 141 800 - Fax: (+34)976 141 810 > > > > -- > coreboot mailing list: [email protected] > https://www.coreboot.org/mailman/listinfo/coreboot -- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
