On 03/03/13 16:48, Andrew Goodbody wrote:
On 03/03/13 14:28, Andrew Basterfield wrote:
Hi Andrew
The lack of 2nd PCIe and ethernet is expected behavior when the 2nd
socket is empty - please see the following
ftp://ftp.tyan.com/manuals/m_s2895_101.pdf
Please see 2nd 'NOTE' section 2.4 page 18
Looking at the system architecture section 2.2, page 9, it becomes clear
why this is so.
Ooh, ugly. Sorry, I misunderstood what you were saying was the problem.
I think I will have to re-cap the board to restore the 2nd CPU socket to
eliminate this variable.
--Andrew
You say it is stable with one CPU using the Tyan BIOS so it is at least
possible to use the board as is.
There is certainly code in the S2895 devtree and mptable to allow for
the missing devices caused by a missing 2nd CPU but I have no idea how
well tested that is. How does it behave if you boot with ACPI disabled?
Andrew
Hi
It is much much better with ACPI disabled for the kernel; debian boots,
I get SATA and USB although no onboard ethernet.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 ([email protected])
(gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=36866c4a-08a5-4a58-8ba5-a26165406526 ro vga=normal verbose acpi=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Tyan S2895, BIOS 4.0-3575-g27bd64a 02/28/2013
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
[ 0.000000] 1 base 0100000000 mask FF80000000 write-back
[ 0.000000] 2 base 0180000000 mask FFC0000000 write-back
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd970] fd970
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffe0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffe0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffe0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
[ 0.000000] 0100000000 - 01c0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1c0000000 @ bffdc000-bffe0000
[ 0.000000] RAMDISK: 36b82000 - 375b9000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001c0000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001c0000000
[ 0.000000] NODE_DATA [00000001bfffb000 - 00000001bfffffff]
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD ->
[ffff8801b9600000-ffff8801be9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001c0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffe0
[ 0.000000] 0: 0x00100000 -> 0x001c0000
[ 0.000000] On node 0 totalpages: 1572719
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 768024 pages, LIFO batch:31
[ 0.000000] Normal zone: 10752 pages used for memmap
[ 0.000000] Normal zone: 775680 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: Tyan
[ 0.000000] MPTABLE: Product ID: S2895
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfc000000, GSI 24-27
[ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfc001000, GSI 28-31
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:40000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s82880 r8192
d23616 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1547626
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=36866c4a-08a5-4a58-8ba5-a26165406526 ro vga=normal verbose acpi=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f8000000 size 64 MB
[ 0.000000] Memory: 6119588k/7340032k available (3418k kernel code, 1049156k
absent, 171288k reserved, 3319k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2613.307 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008066] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5226.61 BogoMIPS (lpj=10453228)
[ 0.008191] pid_max: default: 32768 minimum: 301
[ 0.008300] Security Framework initialized
[ 0.008358] AppArmor: AppArmor disabled by boot time parameter
[ 0.009043] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.015706] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018246] Mount-cache hash table entries: 256
[ 0.018464] Initializing cgroup subsys cpuacct
[ 0.018527] Initializing cgroup subsys memory
[ 0.018603] Initializing cgroup subsys devices
[ 0.018664] Initializing cgroup subsys freezer
[ 0.018724] Initializing cgroup subsys net_cls
[ 0.018785] Initializing cgroup subsys blkio
[ 0.018852] Initializing cgroup subsys perf_event
[ 0.018942] tseg: 0000000000
[ 0.018962] CPU: Physical Processor ID: 0
[ 0.019016] CPU: Processor Core ID: 0
[ 0.019074] mce: CPU supports 5 MCE banks
[ 0.019497] ExtINT in hardware and MP table differ
[ 0.019911] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[ 0.059661] CPU0: Dual Core AMD Opteron(tm) Processor 285 stepping 02
[ 0.164024] Performance Events: AMD PMU driver.
[ 0.164120] ... version: 0
[ 0.164180] ... bit width: 48
[ 0.164240] ... generic registers: 4
[ 0.164299] ... value mask: 0000ffffffffffff
[ 0.164361] ... max period: 00007fffffffffff
[ 0.164423] ... fixed-purpose events: 0
[ 0.164483] ... event mask: 000000000000000f
[ 0.164731] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164957] Booting Node 0, Processors #1 Ok.
[ 0.165045] smpboot cpu 1: start_ip = 9a000
[ 0.252071] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.252148] Brought up 2 CPUs
[ 0.252201] Total of 2 processors activated (10453.73 BogoMIPS).
[ 0.252939] devtmpfs: initialized
[ 0.256426] print_constraints: dummy:
[ 0.256426] NET: Registered protocol family 16
[ 0.256486] node 0 link 0: io port [1000, 2fff]
[ 0.256489] node 0 link 2: io port [4000, 7fff]
[ 0.256492] TOM: 00000000c0000000 aka 3072M
[ 0.256553] node 0 link 0: mmio [a0000, bffff]
[ 0.256556] node 0 link 2: mmio [fc000000, fc0fffff]
[ 0.256559] node 0 link 0: mmio [f0000000, f41fffff]
[ 0.256561] TOM2: 00000001c0000000 aka 7168M
[ 0.256622] bus: [00, 02] on node 0 link 0
[ 0.256624] bus: 00 index 0 [io 0x0000-0x3fff]
[ 0.256626] bus: 00 index 1 [io 0x8000-0xffff]
[ 0.256628] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.256630] bus: 00 index 3 [mem 0xc0000000-0xfbffffff]
[ 0.256632] bus: 00 index 4 [mem 0xfc100000-0xffffffff]
[ 0.256634] bus: 00 index 5 [mem 0x1c0000000-0xfcffffffff]
[ 0.256636] bus: [40, 42] on node 0 link 2
[ 0.256638] bus: 40 index 0 [io 0x4000-0x7fff]
[ 0.256640] bus: 40 index 1 [mem 0xfc000000-0xfc0fffff]
[ 0.256712] PCI: Using configuration type 1 for base access
[ 0.257542] bio: create slab <bio-0> at 0
[ 0.257542] ACPI: Interpreter disabled.
[ 0.257542] vgaarb: loaded
[ 0.257542] PCI: Probing PCI hardware
[ 0.257542] PCI: Probing PCI hardware (bus 00)
[ 0.257542] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[ 0.257542] pci 0000:00:01.0: [10de:0051] type 0 class 0x000601
[ 0.257542] pci 0000:00:01.0: reg 10: [io 0x2400-0x247f]
[ 0.257542] pci 0000:00:01.0: reg 14: [mem 0xfec00000-0xfec00fff]
[ 0.257542] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.257542] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[ 0.257542] pci 0000:00:01.1: reg 10: [io 0x2800-0x281f]
[ 0.257542] pci 0000:00:01.1: reg 20: [io 0x2480-0x24bf]
[ 0.257542] pci 0000:00:01.1: reg 24: [io 0x24c0-0x24ff]
[ 0.257542] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.257542] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[ 0.257542] pci 0000:00:02.0: reg 10: [mem 0xf4100000-0xf4100fff]
[ 0.257542] pci 0000:00:02.0: supports D1 D2
[ 0.257542] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.257542] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[ 0.257542] pci 0000:00:02.1: reg 10: [mem 0xf4105000-0xf41050ff]
[ 0.257542] pci 0000:00:02.1: supports D1 D2
[ 0.257542] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.257542] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[ 0.257542] pci 0000:00:04.0: reg 10: [io 0x1c00-0x1cff]
[ 0.257542] pci 0000:00:04.0: reg 14: [io 0x2000-0x20ff]
[ 0.257542] pci 0000:00:04.0: reg 18: [mem 0xf4101000-0xf4101fff]
[ 0.257542] pci 0000:00:04.0: supports D1 D2
[ 0.257542] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[ 0.257542] pci 0000:00:06.0: reg 20: [io 0x2820-0x282f]
[ 0.257542] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[ 0.257542] pci 0000:00:07.0: reg 10: [io 0x2850-0x2857]
[ 0.257542] pci 0000:00:07.0: reg 14: [io 0x2878-0x287b]
[ 0.257542] pci 0000:00:07.0: reg 18: [io 0x2858-0x285f]
[ 0.257542] pci 0000:00:07.0: reg 1c: [io 0x287c-0x287f]
[ 0.257542] pci 0000:00:07.0: reg 20: [io 0x2830-0x283f]
[ 0.257542] pci 0000:00:07.0: reg 24: [mem 0xf4102000-0xf4102fff]
[ 0.257542] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[ 0.257542] pci 0000:00:08.0: reg 10: [io 0x2860-0x2867]
[ 0.257542] pci 0000:00:08.0: reg 14: [io 0x2880-0x2883]
[ 0.257542] pci 0000:00:08.0: reg 18: [io 0x2868-0x286f]
[ 0.257542] pci 0000:00:08.0: reg 1c: [io 0x2884-0x2887]
[ 0.257542] pci 0000:00:08.0: reg 20: [io 0x2840-0x284f]
[ 0.257542] pci 0000:00:08.0: reg 24: [mem 0xf4103000-0xf4103fff]
[ 0.257542] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[ 0.257542] pci 0000:00:0a.0: [10de:0056] type 0 class 0x000200
[ 0.257542] pci 0000:00:0a.0: reg 10: [mem 0xf4104000-0xf4104fff]
[ 0.257542] pci 0000:00:0a.0: reg 14: [io 0x2870-0x2877]
[ 0.257542] pci 0000:00:0a.0: supports D1 D2
[ 0.257542] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.257542] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[ 0.257542] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.257542] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.257542] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.257542] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.257542] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.257542] PCI: peer root bus 00 res updated from pci conf
[ 0.257542] pci 0000:01:04.0: [5333:8a01] type 0 class 0x000300
[ 0.257542] pci 0000:01:04.0: reg 10: [mem 0xf0000000-0xf3ffffff]
[ 0.257542] pci 0000:01:04.0: reg 30: [mem 0xf4000000-0xf400ffff pref]
[ 0.257542] pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00
[ 0.257542] pci 0000:01:05.0: reg 10: [mem 0xf4014000-0xf40147ff]
[ 0.257542] pci 0000:01:05.0: reg 14: [mem 0xf4010000-0xf4013fff]
[ 0.257542] pci 0000:01:05.0: supports D1 D2
[ 0.257542] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.257542] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf40fffff]
[ 0.257542] pci 0000:00:09.0: bridge window [io 0x0000-0x3fff]
(subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [io 0x8000-0xffff]
(subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xfbffffff]
(subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0xfc100000-0xffffffff]
(subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0x1c0000000-0xfcffffffff]
(subtractive decode)
[ 0.257542] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.260235] vgaarb: device added:
PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260459] pci 0000:40:00.0: [1022:7450] type 1 class 0x000604
[ 0.260500] pci 0000:40:00.1: [1022:7451] type 0 class 0x000800
[ 0.260508] pci 0000:40:00.1: reg 10: [mem 0xfc000000-0xfc000fff 64bit]
[ 0.260540] pci 0000:40:01.0: [1022:7450] type 1 class 0x000604
[ 0.260578] pci 0000:40:01.1: [1022:7451] type 0 class 0x000800
[ 0.260586] pci 0000:40:01.1: reg 10: [mem 0xfc001000-0xfc001fff 64bit]
[ 0.260623] PCI: peer root bus 40 res updated from pci conf
[ 0.260655] pci 0000:40:00.0: PCI bridge to [bus 41-41]
[ 0.260749] pci 0000:40:01.0: PCI bridge to [bus 42-42]
[ 0.260974] PCI: Discovered primary peer bus 40 [IRQ]
[ 0.261040] pci 0000:00:09.0: default IRQ router [10de:005c]
[ 0.261111] PCI: pci_cache_line_size set to 64 bytes
[ 0.261159] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.261162] reserve RAM buffer: 00000000bffe0000 - 00000000bfffffff
[ 0.263376] pnp: PnP ACPI: disabled
[ 0.264105] PCI: max bus depth: 1 pci_try_num: 2
[ 0.264132] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.264192] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf40fffff]
[ 0.264259] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.264322] pci 0000:40:00.0: PCI bridge to [bus 41-41]
[ 0.264385] pci 0000:40:01.0: PCI bridge to [bus 42-42]
[ 0.264453] pci 0000:00:09.0: setting latency timer to 64
[ 0.264457] pci 0000:00:0e.0: setting latency timer to 64
[ 0.264465] pci_bus 0000:00: resource 4 [io 0x0000-0x3fff]
[ 0.264467] pci_bus 0000:00: resource 5 [io 0x8000-0xffff]
[ 0.264470] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.264472] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfbffffff]
[ 0.264474] pci_bus 0000:00: resource 8 [mem 0xfc100000-0xffffffff]
[ 0.264477] pci_bus 0000:00: resource 9 [mem 0x1c0000000-0xfcffffffff]
[ 0.264479] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf40fffff]
[ 0.264482] pci_bus 0000:01: resource 4 [io 0x0000-0x3fff]
[ 0.264484] pci_bus 0000:01: resource 5 [io 0x8000-0xffff]
[ 0.264486] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.264488] pci_bus 0000:01: resource 7 [mem 0xc0000000-0xfbffffff]
[ 0.264490] pci_bus 0000:01: resource 8 [mem 0xfc100000-0xffffffff]
[ 0.264493] pci_bus 0000:01: resource 9 [mem 0x1c0000000-0xfcffffffff]
[ 0.264496] pci_bus 0000:40: resource 4 [io 0x4000-0x7fff]
[ 0.264498] pci_bus 0000:40: resource 5 [mem 0xfc000000-0xfc0fffff]
[ 0.264555] NET: Registered protocol family 2
[ 0.264838] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.269075] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.274089] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.274825] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.274890] TCP reno registered
[ 0.274964] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.275126] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.275393] NET: Registered protocol family 1
[ 0.275523] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 0.275616] pci 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 20
[ 0.275723] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.275782] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.275869] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.275934] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.276054] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.276115] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.276179] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 0.276252] pci 0000:01:04.0: Boot video device
[ 0.276257] pci 0000:40:00.0: MSI quirk detected; subordinate MSI disabled
[ 0.276322] pci 0000:40:00.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.276391] pci 0000:40:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.276457] pci 0000:40:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.276525] PCI: CLS 64 bytes, default 64
[ 0.276589] Unpacking initramfs...
[ 0.520650] Freeing initrd memory: 10460k freed
[ 0.527891] PCI-DMA: Disabling AGP.
[ 0.528092] PCI-DMA: aperture base @ f8000000 size 65536 KB
[ 0.528155] init_memory_mapping: 00000000f8000000-00000000fc000000
[ 0.528220] 00f8000000 - 00fc000000 page 2M
[ 0.528228] PCI-DMA: using GART IOMMU.
[ 0.528285] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.531758] platform rtc_cmos: registered platform RTC device (no PNP device
found)
[ 0.532224] audit: initializing netlink socket (disabled)
[ 0.532224] type=2000 audit(1362429406.532:1): initialized
[ 0.544998] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.544998] VFS: Disk quotas dquot_6.5.2
[ 0.544998] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.544998] msgmni has been set to 12101
[ 0.544998] alg: No test for stdrng (krng)
[ 0.544998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.544998] io scheduler noop registered
[ 0.544998] io scheduler deadline registered
[ 0.544998] io scheduler cfq registered (default)
[ 0.544998] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.544998] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.544998] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.544998] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.568037] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.616187] Linux agpgart interface v0.103
[ 0.616198] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.617747] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.617747] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.617747] mousedev: PS/2 mouse device common for all mice
[ 0.617747] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.617747] rtc0: alarms up to one day, 114 bytes nvram
[ 0.617747] cpuidle: using governor ladder
[ 0.617747] cpuidle: using governor menu
[ 0.624227] TCP cubic registered
[ 0.624319] NET: Registered protocol family 10
[ 0.624822] Mobile IPv6
[ 0.624877] NET: Registered protocol family 17
[ 0.624940] Registering the dns_resolver key type
[ 0.625047] PM: Hibernation image not present or could not be loaded.
[ 0.625047] registered taskstats version 1
[ 0.625047] rtc_cmos rtc_cmos: setting system clock to 2013-03-04 20:36:47
UTC (1362429407)
[ 0.625047] Initializing network drop monitor service
[ 0.628350] Freeing unused kernel memory: 576k freed
[ 0.628679] Write protecting the kernel read-only data: 6144k
[ 0.631355] Freeing unused kernel memory: 660k freed
[ 0.634395] Freeing unused kernel memory: 680k freed
[ 0.644581] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.645165] udevd[49]: starting version 175
[ 0.671176] usbcore: registered new interface driver usbfs
[ 0.671265] usbcore: registered new interface driver hub
[ 0.675137] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.64.
[ 0.675248] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 0.675310] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.676719] forcedeth 0000:00:0a.0: open: Could not find a valid PHY
[ 0.676802] forcedeth: probe of 0000:00:0a.0 failed with error -12
[ 0.689086] SCSI subsystem initialized
[ 0.701051] usbcore: registered new device driver usb
[ 0.701610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.701713] ehci_hcd 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 20
[ 0.701796] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.701799] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.701889] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 0.702015] ehci_hcd 0000:00:02.1: debug port 1
[ 0.702078] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.702093] ehci_hcd 0000:00:02.1: irq 20, io mem 0xf4105000
[ 0.703982] libata version 3.00 loaded.
[ 0.705773] firewire_ohci 0000:01:05.0: PCI->APIC IRQ transform: INT A ->
IRQ 19
[ 0.712078] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.712170] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712235] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.712313] usb usb1: Product: EHCI Host Controller
[ 0.712373] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 0.712436] usb usb1: SerialNumber: 0000:00:02.1
[ 0.712640] hub 1-0:1.0: USB hub found
[ 0.712698] hub 1-0:1.0: 10 ports detected
[ 0.713046] sata_nv 0000:00:07.0: version 3.5
[ 0.713060] sata_nv 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.713184] sata_nv 0000:00:07.0: setting latency timer to 64
[ 0.713461] scsi0 : sata_nv
[ 0.713614] scsi1 : sata_nv
[ 0.713721] ata1: SATA max UDMA/133 cmd 0x2850 ctl 0x2878 bmdma 0x2830 irq 23
[ 0.713789] ata2: SATA max UDMA/133 cmd 0x2858 ctl 0x287c bmdma 0x2838 irq 23
[ 0.713893] sata_nv 0000:00:08.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 0.713999] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.714291] scsi2 : sata_nv
[ 0.714411] scsi3 : sata_nv
[ 0.714520] ata3: SATA max UDMA/133 cmd 0x2860 ctl 0x2880 bmdma 0x2840 irq 22
[ 0.714585] ata4: SATA max UDMA/133 cmd 0x2868 ctl 0x2884 bmdma 0x2848 irq 22
[ 0.714699] pata_amd 0000:00:06.0: version 0.4.1
[ 0.714739] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.715198] scsi4 : pata_amd
[ 0.715324] scsi5 : pata_amd
[ 0.715430] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2820 irq 14
[ 0.715495] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2828 irq 15
[ 0.724558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.724716] ohci_hcd 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 0.724791] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.724794] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.724862] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 2
[ 0.724954] ohci_hcd 0000:00:02.0: irq 21, io mem 0xf4100000
[ 0.760089] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4
IR + 8 IT contexts, quirks 0x2
[ 0.782055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.782114] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.782187] usb usb2: Product: OHCI Host Controller
[ 0.782243] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 0.782300] usb usb2: SerialNumber: 0000:00:02.0
[ 0.782390] hub 2-0:1.0: USB hub found
[ 0.782390] hub 2-0:1.0: 10 ports detected
[ 0.892269] ata5.00: ATAPI: SONY CD-RW CRX320EE, RYK4, max UDMA/33
[ 0.892269] ata5: nv_mode_filter: 0x739f&0xfffff->0x739f, BIOS=0x0 (0x0)
ACPI=0x0
[ 0.924205] ata5.00: configured for UDMA/33
[ 1.024112] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.024124] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.156082] usb 1-1: New USB device found, idVendor=0ace, idProduct=1215
[ 1.156141] usb 1-1: New USB device strings: Mfr=16, Product=32,
SerialNumber=0
[ 1.156224] usb 1-1: Product: USB2.0 WLAN
[ 1.156278] usb 1-1: Manufacturer: ZyDAS
[ 1.180085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.204093] ata1.00: ATA-7: WDC WD2500YS-01SHB1, 20.06C06, max UDMA/133
[ 1.204163] ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.212149] ata1.00: configured for UDMA/133
[ 1.212998] scsi 0:0:0:0: Direct-Access ATA WDC WD2500YS-01S 20.0
PQ: 0 ANSI: 5
[ 1.260186] firewire_core: created device fw0: GUID 00e08100002418b7, S400
[ 1.524100] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.836119] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.836234] scsi 4:0:0:0: CD-ROM SONY CD-RW CRX320EE RYK4
PQ: 0 ANSI: 5
[ 2.006763] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233
GiB)
[ 2.007002] sd 0:0:0:0: [sda] Write Protect is off
[ 2.007059] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.007079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.028136] sda: sda1 sda2 < sda5 >
[ 2.029626] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.029877] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.029978] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.033518] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 2.033518] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.033518] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.437364] microcode: CPU0: family 15 not supported
[ 2.437736] microcode: CPU1: family 15 not supported
[ 2.437900] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 2.484875] PM: Starting manual resume from disk
[ 2.484875] PM: Hibernation image partition 8:5 present
[ 2.484875] PM: Looking for hibernation image.
[ 2.484875] PM: Image not found (code -22)
[ 2.484875] PM: Hibernation image not present or could not be loaded.
[ 2.564428] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.392499] udevd[304]: starting version 175
[ 5.034585] shpchp 0000:40:00.0: HPC vendor_id 1022 device_id 7450 ss_vid 0
ss_did 0
[ 5.034585] shpchp 0000:40:00.0: Cannot reserve MMIO region
[ 5.034585] shpchp 0000:40:01.0: HPC vendor_id 1022 device_id 7450 ss_vid 0
ss_did 0
[ 5.034585] shpchp 0000:40:01.0: Cannot reserve MMIO region
[ 5.034585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.161189] EDAC MC: Ver: 2.1.0
[ 5.172586] MCE: In-kernel MCE decoding enabled.
[ 5.188327] AMD64 EDAC driver v3.4.0
[ 5.188911] EDAC amd64: DRAM ECC enabled.
[ 5.188976] EDAC amd64: K8 revE or earlier detected (node 0).
[ 5.189079] EDAC amd64: CS0: Registered Double data rate SDRAM
[ 5.189142] EDAC amd64: CS2: Registered Double data rate SDRAM
[ 5.189205] EDAC amd64: CS3: Registered Double data rate SDRAM
[ 5.189307] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV
0000:00:18.2
[ 5.189385] EDAC PCI0: Giving out device to module 'amd64_edac' controller
'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 5.287036] i2c i2c-0: nForce2 SMBus adapter at 0x2480
[ 5.287036] i2c i2c-1: nForce2 SMBus adapter at 0x24c0
[ 5.318349] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.483289] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 285 (2
cpu cores) (version 2.20.00)
[ 5.483289] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects
found.
[ 5.483289] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 5.495398] snd_intel8x0 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ
20
[ 5.495398] snd_intel8x0 0000:00:04.0: setting latency timer to 64
[ 5.729301] cfg80211: Calling CRDA to update world regulatory domain
[ 5.884378] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 6.041338] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.041338] zd1211rw 1-1:1.0: phy0
[ 6.041338] usbcore: registered new interface driver zd1211rw
[ 6.504410] codec_ready: codec is not ready [0x700000]
[ 6.504502] snd_intel8x0: probe of 0000:00:04.0 failed with error -5
[ 6.608743] cfg80211: World regulatory domain updated:
[ 6.608776] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 6.608864] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 6.608944] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 6.609018] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 6.609093] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 6.609167] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 7.453626] Adding 8383484k swap on /dev/sda5. Priority:-1 extents:1
across:8383484k
[ 7.473691] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.660562] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.844764] loop: module loaded
[ 8.932557] usb 1-1: firmware: agent loaded zd1211/zd1211b_ub into memory
[ 8.940608] usb 1-1: firmware: agent loaded zd1211/zd1211b_uphr into memory
[ 8.972638] zd1211rw 1-1:1.0: firmware version 4725
[ 9.012575] zd1211rw 1-1:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72
AL2230_RF pa0 g--NS
[ 9.016720] cfg80211: Calling CRDA for country: DE
[ 9.021339] cfg80211: Regulatory domain changed to country: DE
[ 9.021407] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 9.021487] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 9.021565] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 9.021644] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 9.021724] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A,
2698 mBm)
[ 9.029849] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.180713] wlan0: authenticate with 00:14:6c:53:54:c8 (try 1)
[ 10.184650] wlan0: authenticated
[ 10.217437] wlan0: associate with 00:14:6c:53:54:c8 (try 1)
[ 10.220654] wlan0: RX AssocResp from 00:14:6c:53:54:c8 (capab=0x411 status=0
aid=2)
[ 10.220658] wlan0: associated
[ 10.221916] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.929978] Bluetooth: Core ver 2.16
[ 13.930071] NET: Registered protocol family 31
[ 13.930131] Bluetooth: HCI device and connection manager initialized
[ 13.930196] Bluetooth: HCI socket layer initialized
[ 13.930258] Bluetooth: L2CAP socket layer initialized
[ 13.930323] Bluetooth: SCO socket layer initialized
[ 13.987040] Bluetooth: RFCOMM TTY layer initialized
[ 13.987040] Bluetooth: RFCOMM socket layer initialized
[ 13.987040] Bluetooth: RFCOMM ver 1.11
[ 14.293242] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.293308] Bluetooth: BNEP filters: protocol multicast
[ 18.781747] mtrr: type mismatch for f0000000,200000 old: write-back new:
write-combining
andrew@debian:~$ sudo lspci -tvnn
-+-[0000:40]-+-00.0-[41]--
| +-00.1 Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
| +-01.0-[42]--
| \-01.1 Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
\-[0000:00]-+-00.0 NVIDIA Corporation CK804 Memory Controller [10de:005e]
+-01.0 NVIDIA Corporation CK804 ISA Bridge [10de:0051]
+-01.1 NVIDIA Corporation CK804 SMBus [10de:0052]
+-02.0 NVIDIA Corporation CK804 USB Controller [10de:005a]
+-02.1 NVIDIA Corporation CK804 USB Controller [10de:005b]
+-04.0 NVIDIA Corporation CK804 AC'97 Audio Controller [10de:0059]
+-06.0 NVIDIA Corporation CK804 IDE [10de:0053]
+-07.0 NVIDIA Corporation CK804 Serial ATA Controller [10de:0054]
+-08.0 NVIDIA Corporation CK804 Serial ATA Controller [10de:0055]
+-09.0-[01]--+-04.0 S3 Inc. 86c375 [ViRGE/DX] or 86c385
[ViRGE/GX] [5333:8a01]
| \-05.0 Texas Instruments TSB43AB22A IEEE-1394a-2000
Controller (PHY/Link) [iOHCI-Lynx] [104c:8023]
+-0a.0 NVIDIA Corporation CK804 Ethernet Controller [10de:0056]
+-0e.0-[02]--
+-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
+-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map [1022:1101]
+-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller [1022:1102]
\-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
