]Hi Rudolf, ] ]We use SATA hard disk. Maybe something else is wrong? Thanks.
Though your hardware connection is SATA, the software interface is probably IDE. WinXP has no in-box AHCI driver for SB700 or SB800. To make WinXP use AHCI with AMD requires pressing F6 during setup and giving it a driver floppy. Check device manager for a DMA mode such as 'Ultra DMA mode 6' shown in the attached image. Thanks, Scott ]Regards, ] ]Jiang ] ]On Fri, Apr 1, 2011 at 3:54 PM, Rudolf Marek <[email protected]> wrote: ]> Hi, ]> ]> Do you use sata or IDE? Maybe IDE does not have DMA working in Windows. If ]> you use IDE try to find out if PIO is used or DMA. ]> ]> Thanks ]> Rudolf
<<attachment: ide-dma.png>>
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
